<?xml version="1.0" encoding="UTF-8"?><CONCLUSION NNC="YES" xmlns:fmx="http://opoce" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://formex.publications.europa.eu/schema/formex-05.58-20161101.xd"><BIB.CONCLUSION><REF.CASE FILE="n.a."><NO.CASE>C-395/16</NO.CASE></REF.CASE><NO.CELEX>62016CC0395</NO.CELEX><NO.ECLI ECLI="ECLI:EU:C:2017:779">EU:C:2017:779</NO.ECLI><NO.SEQ>0001</NO.SEQ><PAGE.FIRST.ECR>1</PAGE.FIRST.ECR><PAGE.SEQ>1</PAGE.SEQ><PAGE.LAST.ECR>16</PAGE.LAST.ECR><PAGE.TOTAL>16</PAGE.TOTAL></BIB.CONCLUSION><CURR.TITLE><PAGE.HEADER><P><HT TYPE="SC">Opinion of Mr Saugmandsgaard Øe — Case C-395/16</HT></P><P><HT TYPE="SC">Doceram</HT></P></PAGE.HEADER></CURR.TITLE><TITLE><TI><P><HT TYPE="UC">Opinion of Advocate General</HT></P><P><HT TYPE="UC">Saugmandsgaard Øe</HT></P><P>delivered on <DATE ISO="20171019">19 October 2017</DATE><NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0001"><P>Original language: French.</P></NOTE></P></TI><STI><P><HT TYPE="BOLD">Case C‑395/16</HT></P><P>DOCERAM GmbH</P><P>v</P><P>CeramTec GmbH</P><P><HT TYPE="NORMAL">(Request for a preliminary ruling<BR/>from the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf, Germany))</HT></P></STI></TITLE><INTERMEDIATE><INDEX IDX.CLOSE=")" SEPARATOR=" — " IDX.OPEN="("><KEYWORD>Reference for a preliminary ruling</KEYWORD><KEYWORD>Intellectual and industrial property</KEYWORD><KEYWORD>Community designs</KEYWORD><KEYWORD>Regulation (EC) No 6/2002</KEYWORD><KEYWORD>Article 8(1)</KEYWORD><KEYWORD>Features of appearance of a product solely dictated by its technical function</KEYWORD><KEYWORD>Definition of that concept</KEYWORD><KEYWORD>Assessment criteria</KEYWORD></INDEX></INTERMEDIATE><CONTENTS.CONCLUSION><GR.SEQ LEVEL="1"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">I.</HT></NO.P><TXT><HT TYPE="BOLD">Introduction</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0001"><NO.P>1.</NO.P><TXT>The request for a preliminary ruling from the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf, Germany) concerns the interpretation of Article 8(1) of Council Regulation (EC) No 6/2002 of <DATE ISO="20011212">12 December 2001</DATE> on Community designs.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0002"><P><REF.DOC.OJ COLL="L" NO.OJ="003" PAGE.FIRST="1" DATE.PUB="2002">OJ 2002 L 3, p. 1</REF.DOC.OJ>. Amendments have subsequently been made to the regulation, but the relevant provisions in the present case have not been affected by them.</P></NOTE> That provision, which has never been interpreted by the Court, provides that features of appearance of a product dictated solely by its technical function are excluded from the scope of the protection conferred by that regulation.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0002"><NO.P>2.</NO.P><TXT>The order for reference was made in a dispute between two companies, one of which is the proprietor of a number of registered Community designs, while the other manufactures products similar to the products protected by those rights. After the former company had brought an action for an injunction against the latter, the latter company responded by arguing that the rights whose infringement had been claimed by the applicant in the main proceedings were invalid. In support of its counterclaim, it relied on the exclusion laid down in Article 8(1).</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0003"><NO.P>3.</NO.P><TXT>The questions asked by the referring court call on the Court to define the concept of <QUOT.START CODE="2018" ID="QS0001" REF.END="QE0001"/>features of appearance of a product which are solely dictated by its technical function<QUOT.END REF.START="QS0001" CODE="2019" ID="QE0001"/> within the meaning of that provision and to determine how it should be assessed whether the designs in question have such features.</TXT></NP.ECR></GR.SEQ><?PAGE NO="2"?><GR.SEQ LEVEL="1"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">II.</HT></NO.P><TXT><HT TYPE="BOLD">Legal context</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0004"><NO.P>4.</NO.P><TXT>According to recital 10 of Regulation No 6/2002, <QUOT.START CODE="2018" ID="QS0002" REF.END="QE0002"/>[t]echnological innovation should not be hampered by granting design protection to features dictated solely by a technical function. It is understood that this does not entail that a design must have an aesthetic quality. Likewise, the interoperability of products of different makes should not be hindered by extending protection to the design of mechanical fittings. Consequently, those features of a design which are excluded from protection for those reasons should not be taken into consideration for the purpose of assessing whether other features of the design fulfil the requirements for protection<QUOT.END REF.START="QS0002" CODE="2019" ID="QE0002"/>.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0005"><NO.P>5.</NO.P><TXT>Article 4 of the regulation, <QUOT.START CODE="2018" ID="QS0003" REF.END="QE0003"/>Requirements for protection<QUOT.END REF.START="QS0003" CODE="2019" ID="QE0003"/>, reads as follows:</TXT><P><QUOT.S LEVEL="1"><PARAG IDENTIFIER="004.001"><NO.PARAG><QUOT.START CODE="2018" ID="QS0004" REF.END="QE0004"/>1.</NO.PARAG><ALINEA>A design shall be protected by a Community design to the extent that it is new and has individual character.</ALINEA></PARAG><PARAG IDENTIFIER="004.002"><NO.PARAG>2.</NO.PARAG><ALINEA><P>A design applied to or incorporated in a product which constitutes a component part of a complex product shall only be considered to be new and to have individual character:</P><LIST TYPE="alpha"><ITEM><NP><NO.P>(a)</NO.P><TXT>if the component part, once it has been incorporated into the complex product, remains visible during normal use of the latter; and</TXT></NP></ITEM><ITEM><NP><NO.P>(b)</NO.P><TXT>to the extent that those visible features of the component part fulfil in themselves the requirements as to novelty and individual character.</TXT></NP></ITEM></LIST><P>…<QUOT.END REF.START="QS0004" CODE="2019" ID="QE0004"/></P></ALINEA></PARAG></QUOT.S></P></NP.ECR><NP.ECR IDENTIFIER="NP0006"><NO.P>6.</NO.P><TXT>Article 5 of the regulation, <QUOT.START CODE="2018" ID="QS0005" REF.END="QE0005"/>Novelty<QUOT.END REF.START="QS0005" CODE="2019" ID="QE0005"/>, provides in paragraph 1 that <QUOT.START CODE="2018" ID="QS0006" REF.END="QE0006"/>[a] design shall be considered to be new if no identical design has been made available to the public<QUOT.END REF.START="QS0006" CODE="2019" ID="QE0006"/>.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0007"><NO.P>7.</NO.P><TXT>Article 6 of the regulation, <QUOT.START CODE="2018" ID="QS0007" REF.END="QE0007"/>Individual character<QUOT.END REF.START="QS0007" CODE="2019" ID="QE0007"/>, provides:</TXT><P><QUOT.S LEVEL="1"><PARAG IDENTIFIER="006.001"><NO.PARAG><QUOT.START CODE="2018" ID="QS0008" REF.END="QE0008"/>1.</NO.PARAG><ALINEA>A design shall be considered to have individual character if the overall impression it produces on the informed user differs from the overall impression produced on such a user by any design which has been made available to the public … .</ALINEA></PARAG><PARAG IDENTIFIER="006.002"><NO.PARAG>2.</NO.PARAG><ALINEA>In assessing individual character, the degree of freedom of the designer in developing the design shall be taken into consideration.<QUOT.END REF.START="QS0008" CODE="2019" ID="QE0008"/></ALINEA></PARAG></QUOT.S></P></NP.ECR><NP.ECR IDENTIFIER="NP0008"><NO.P>8.</NO.P><TXT>Article 8 of the regulation, <QUOT.START CODE="2018" ID="QS0009" REF.END="QE0009"/>Designs dictated by their technical function and designs of interconnections<QUOT.END REF.START="QS0009" CODE="2019" ID="QE0009"/>, provides in paragraph 1 that <QUOT.START CODE="2018" ID="QS0010" REF.END="QE0010"/>[a] Community design shall not subsist in features of appearance of a product which are solely dictated by its technical function<QUOT.END REF.START="QS0010" CODE="2019" ID="QE0010"/>.</TXT></NP.ECR></GR.SEQ><GR.SEQ LEVEL="1"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">III.</HT></NO.P><TXT><HT TYPE="BOLD">The dispute in the main proceedings, the questions referred and the procedure before the Court</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0009"><NO.P>9.</NO.P><TXT>DOCERAM GmbH is a company incorporated under German law which manufactures technical ceramic components. It supplies customers in the automotive, textile machinery and mechanical engineering industries. It is the proprietor of a number of registered Community designs which protect centring pins for welding in three different geometrical shapes, each of which is produced in six different types.</TXT></NP.ECR><?PAGE NO="3"?><NP.ECR IDENTIFIER="NP0010"><NO.P>10.</NO.P><TXT>CeramTec GmbH is also a company incorporated under German law, which manufactures and markets ceramic centring pins in the same variants as those protected by the designs of which DOCERAM is the proprietor.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0011"><NO.P>11.</NO.P><TXT>DOCERAM brought an action against CeramTec at the Landgericht Düsseldorf (Regional Court, Düsseldorf, Germany), requesting in particular that it be ordered to discontinue the infringement of its intellectual property rights. The defendant in the main proceedings brought a counterclaim for a declaration of invalidity of those rights, maintaining that the features of appearance of the products in question were dictated solely by their technical function within the meaning of Article 8(1) of Regulation No 6/2002.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0012"><NO.P>12.</NO.P><TXT>The Landgericht Düsseldorf (Regional Court, Düsseldorf) dismissed the action brought by DOCERAM and declared the designs at issue to be invalid on the ground that they were excluded from the protection offered by the regulation under Article 8(1) because the design decision had been dictated solely by considerations of technical functionality.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0013"><NO.P>13.</NO.P><TXT>DOCERAM appealed against that judgment to the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf). That court considered that it is relevant to the decision in the main proceedings whether, for the purposes of the application of the exclusion provided for in Article 8(1) of Regulation No 6/2002, it is necessary — as is maintained by some legal literature and case-law, particularly in Germany — to establish that there are no design alternatives fulfilling the same technical function or — as is postulated in the judgment under appeal — to determine objectively whether the desired functionality was the sole factor which dictated the physiognomy of the product in question.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0014"><NO.P>14.</NO.P><TXT>Consequently, by decision of <DATE ISO="20160707">7 July 2016</DATE>, received at the Court on <DATE ISO="20160715">15 July 2016</DATE>, the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf) decided to stay the proceedings and to refer the following questions to the Court for a preliminary ruling:</TXT><P><QUOT.S LEVEL="1"><LIST TYPE="OTHER"><ITEM><NP><NO.P><QUOT.START CODE="2018" ID="QS0011" REF.END="QE0011"/>(1)</NO.P><TXT>Does a technical function that precludes protection within the meaning of Article 8(1) of [Regulation No 6/2002] also exist if the design effect is of no significance for the product design, but the (technical) functionality is the sole factor that dictates the design?</TXT></NP></ITEM><ITEM><NP><NO.P>(2)</NO.P><TXT>If the Court answers Question 1 in the affirmative: From which point of view is it to be assessed whether the individual design features of a product have been chosen solely on the basis of considerations of functionality? Is an <QUOT.START CODE="201C" ID="QS0012" REF.END="QE0012"/>objective observer<QUOT.END REF.START="QS0012" CODE="201D" ID="QE0012"/> required and, if so, how is such an observer to be defined?<QUOT.END REF.START="QS0011" CODE="2019" ID="QE0011"/></TXT></NP></ITEM></LIST></QUOT.S></P></NP.ECR><NP.ECR IDENTIFIER="NP0015"><NO.P>15.</NO.P><TXT>DOCERAM, CeramTec, the Greek and United Kingdom Governments and the European Commission submitted written observations to the Court. At the hearing on <DATE ISO="20170629">29 June 2017</DATE>, they all presented oral arguments.</TXT></NP.ECR></GR.SEQ><?PAGE NO="4"?><GR.SEQ LEVEL="1"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">IV.</HT></NO.P><TXT><HT TYPE="BOLD">Analysis</HT></TXT></NP></TI></TITLE><GR.SEQ LEVEL="2"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">A.</HT></NO.P><TXT><HT TYPE="BOLD"><HT TYPE="ITALIC">The concept of <QUOT.START CODE="2018" ID="QS0013" REF.END="QE0013"/>features of appearance of a product … solely dictated by its technical function<QUOT.END REF.START="QS0013" CODE="2019" ID="QE0013"/> within the meaning of Article 8(1) of Regulation No 6/2002 (first question)</HT></HT></TXT></NP></TI></TITLE><GR.SEQ LEVEL="3"><TITLE><TI><NP><NO.P><HT TYPE="ITALIC">1.</HT></NO.P><TXT><HT TYPE="ITALIC">The substance of the first question and the opposing arguments</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0016"><NO.P>16.</NO.P><TXT>The referring court considers that the designs at issue in the main proceedings are new and possess an individual character in accordance with the requirements of Articles 5 and 6 of Regulation No 6/2002.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0003"><P>Recital 19 of the regulation also states that <QUOT.START CODE="2018" ID="QS0014" REF.END="QE0014"/>[a] Community design should not be upheld unless the design is new and unless it also possesses an individual character in comparison with other designs<QUOT.END REF.START="QS0014" CODE="2019" ID="QE0014"/>.</P></NOTE> It is uncertain whether their protection should nevertheless be excluded under Article 8(1) of the regulation, which provides that <QUOT.START CODE="2018" ID="QS0015" REF.END="QE0015"/>[a] Community design shall not subsist in features of appearance of a product which are solely dictated by its technical function<QUOT.END REF.START="QS0015" CODE="2019" ID="QE0015"/>, given that in the present case designs exist which it describes as <QUOT.START CODE="2018" ID="QS0016" REF.END="QE0016"/>alternatives<QUOT.END REF.START="QS0016" CODE="2019" ID="QE0016"/> in so far as they are capable of achieving the same technical result as is produced by those designs.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0017"><NO.P>17.</NO.P><TXT>In the light of the information provided in the order for reference and the context in which it was made, it seems to me that the <HT TYPE="ITALIC">first question</HT> asks the Court, in essence, to determine <HT TYPE="ITALIC">if</HT> simply establishing that such <HT TYPE="ITALIC">design alternatives</HT> exist implies that the contested designs are not dictated solely by the technical function of the products concerned and are not therefore covered by the exclusion provided for in Article 8(1) <HT TYPE="ITALIC">or</HT> <HT TYPE="ITALIC">if</HT> the relevant criterion to that effect is whether <QUOT.START CODE="2018" ID="QS0017" REF.END="QE0017"/><HT TYPE="ITALIC">aesthetic considerations<QUOT.END REF.START="QS0017" CODE="2019" ID="QE0017"/> or <QUOT.START CODE="2018" ID="QS0018" REF.END="QE0018"/>the design effect</HT><QUOT.END REF.START="QS0018" CODE="2019" ID="QE0018"/> of those products<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0004"><P>The latter expression is used in the first question, while the former appears in the grounds of the order for reference.</P></NOTE> led their designer to opt for a specific design.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0005"><P>In other words, according to CeramTec, it must be ascertained <HT TYPE="ITALIC">if</HT> the application of Article 8(1) definitely requires <QUOT.START CODE="2018" ID="QS0019" REF.END="QE0019"/>examining exhaustively in the [main] proceedings whether there is any possible design alternative or, more specifically, whether all the conceivable alternative appearances would result in a different or lesser technical functionality <HT TYPE="ITALIC">or if</HT> the ground for exclusion [under that provision] is also applicable where the appearance is solely dictated by the need to achieve a specific technical solution and aesthetic considerations are therefore irrelevant<QUOT.END REF.START="QS0019" CODE="2019" ID="QE0019"/> (emphasis added).</P></NOTE> In the event that the latter criterion is accepted by the Court, the referring court then asks it, by its <HT TYPE="ITALIC">second question</HT>, how it is to be assessed whether the individual design features of a product have been chosen solely by reason of technical requirements.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0018"><NO.P>18.</NO.P><TXT>The referring court states that the question asked raises serious doubts in the light of the divergent positions which have been adopted thus far, both in legal literature and in the decision-making practice of the courts of the Member States and the European Union Intellectual Property Office (EUIPO) (formerly the Office for Harmonisation in the Internal Market (Trade Marks and Designs) (OHIM)), with regard to the interpretation of Article 8(1) of Regulation No 6/2002. There are two conflicting legal theories, which can produce diametrically opposite practical results.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0019"><NO.P>19.</NO.P><TXT>According to a <HT TYPE="ITALIC">first theory</HT>, the derogation in that provision should be applied only if it is established that no design alternative allows the same technical function to be fulfilled as the design in question, as the existence of such alternatives would show that the choice of the form in question was not dictated solely by its technical function within the meaning of Article 8(1). This interpretation is based on the criterion usually known as <QUOT.START CODE="2018" ID="QS0020" REF.END="QE0020"/><HT TYPE="ITALIC">multiplicity of forms</HT><QUOT.END REF.START="QS0020" CODE="2019" ID="QE0020"/>, according to which, if other forms of a product exist that are capable of fulfilling the same technical function, the product’s design may enjoy protection, since that range of forms shows that in such a case the product’s designer was not constrained by the function, but was free to opt for any one of those forms when developing the design.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0006"><P>See in particular the sources mentioned in the footnotes to point 20 below.</P></NOTE> Thus interpreted, that provision would be applicable in relatively infrequent cases where the design in question is the only one capable of ensuring that the desired technical result is achieved.</TXT></NP.ECR><?PAGE NO="5"?><NP.ECR IDENTIFIER="NP0020"><NO.P>20.</NO.P><TXT>In its order for reference, the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf) states that the application of this first hypothesis, which, as far as I know, is supported by some legal literature, particularly in Germany,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0007"><P>See in particular Ruhl, O., <HT TYPE="ITALIC">Gemeinschaftsgeschmacksmuster — Kommentar</HT>, Carl Heymanns Verlag, Cologne, 2nd edition, 2010, p. 222, paragraph 22. It seems that this approach was also advocated by the German Government when it transposed a provision of EU law similar to Article 8(1) (see Koschtial, U., <QUOT.START CODE="2018" ID="QS0021" REF.END="QE0021"/>Design law: individual character, visibility and functionality<QUOT.END REF.START="QS0021" CODE="2019" ID="QE0021"/>, <HT TYPE="ITALIC">International Review of Intellectual Property and Competition Law</HT>, 2005, No 3, p. 308).</P></NOTE> Belgium<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0008"><P>See Kaesmacher, D., and Duez, L., <QUOT.START CODE="2018" ID="QS0022" REF.END="QE0022"/>Le nouveau règlement (CE) No 6/2002 sur les dessins ou modèles communautaires<QUOT.END REF.START="QS0022" CODE="2019" ID="QE0022"/>, <HT TYPE="ITALIC">J.T.D.E</HT>., 2002, No 92, p. 186, paragraph 15; Massa, C.-H., and Strowel, A., <QUOT.START CODE="2018" ID="QS0023" REF.END="QE0023"/>Community Design: Cinderella Revamped<QUOT.END REF.START="QS0023" CODE="2019" ID="QE0023"/>, <HT TYPE="ITALIC">E.I.P.R</HT>., 2003, vol. 25(2), p. 72, and De Visscher, F., <QUOT.START CODE="2018" ID="QS0024" REF.END="QE0024"/>La protection des dessins et modèles<QUOT.END REF.START="QS0024" CODE="2019" ID="QE0024"/>, <HT TYPE="ITALIC">Guide juridique de l’entreprise</HT>, Kluwer, Brussels, 2nd edition, 2005, paragraph 370, where it is stated that the multiplicity of forms criterion has been applied to the similar rule of law which previously existed in the Benelux system (see Article 2(2)(a) of the Loi uniforme Benelux en matière de dessins ou modèles (Uniform Benelux Designs Law), last amended on <DATE ISO="20020620">20 June 2002</DATE>).</P></NOTE> and France,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0009"><P>See in particular Passa, J., <HT TYPE="ITALIC">Droit de la propriété industrielle — Tome 1</HT>: <HT TYPE="ITALIC">Marques et autres signes distinctifs, dessins et modèles</HT>, L.G.D.J., Paris, 2nd edition, 2009, paragraphs 708 to 712, and Binctin, N., <HT TYPE="ITALIC">Droit de la propriété intellectuelle — Droit d’auteur, brevet, droits voisins, marque, dessins et modèles</HT>, L.G.D.J., Paris, 2nd edition, 2012, paragraph 296.</P></NOTE> is established not only in national case-law, both in Germany and in other Member States,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0010"><P>Reference is made to two German decisions (<QUOT.START CODE="2018" ID="QS0025" REF.END="QE0025"/>OLG Düsseldorf, GRUR-RR 2012, 200 (205) — Tablet-PC; LG Düsseldorf, Beck RS 2015, 05506<QUOT.END REF.START="QS0025" CODE="2019" ID="QE0025"/>) and the judgment of the Court of Appeal of England and Wales (Civil Division), <HT TYPE="ITALIC">Landor &amp; Hawa International Ltd</HT> v <HT TYPE="ITALIC">Azure Designs Ltd</HT> [2006] EWCA Civ 1285, paragraph 30 et seq. I note that this theory has also been accepted in Spain (see in particular decision of the Juzgado de lo Mercantil No 2 de Alicante (Commercial Court No 2, Corunna, Spain) of <DATE ISO="20121128">28 November 2012</DATE>, Jose Antonioy Hostel Drap SL v Napkings SL, second legal basis).</P></NOTE> but also in the practice of EUIPO.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0011"><P>The referring court cites inter alia the decision of the Invalidity Division of OHIM of <DATE ISO="20070403">3 April 2007</DATE>, Case ICD 3150, <HT TYPE="ITALIC">Lindner Recyclingtech</HT> v <HT TYPE="ITALIC">Franssons Verkstäder</HT>, paragraph 20. I note that this decision was reversed on appeal by the decision mentioned in footnote 13 to this Opinion.</P></NOTE> It is evident from the observations submitted to the Court, DOCERAM is the only party to take this position in the present case.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0021"><NO.P>21.</NO.P><TXT>According to an <HT TYPE="ITALIC">opposing</HT> <HT TYPE="ITALIC">theory</HT>, the exclusion laid down in Article 8(1) of Regulation No 6/2002 should come into play where the features of the design in question are due solely to the need to develop a technical solution, while aesthetic considerations do not have the slightest influence, as in that case there is no creative activity that is worthy of protection under the law relating to designs. Under this theory, which is linked to the <QUOT.START CODE="2018" ID="QS0026" REF.END="QE0026"/><HT TYPE="ITALIC">causality</HT><QUOT.END REF.START="QS0026" CODE="2019" ID="QE0026"/> criterion, it is necessary to identify the reason why the feature in question was chosen by the designer of the product.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0012"><P>See in particular Stone, D., <QUOT.START CODE="2018" ID="QS0027" REF.END="QE0027"/>Le droit européen des dessins et modèles a 10 ans<QUOT.END REF.START="QS0027" CODE="2019" ID="QE0027"/>, <HT TYPE="ITALIC">Magazine de l’OMPI</HT>, 2013, No 6, p. 18, and Brancusi, L., <QUOT.START CODE="2018" ID="QS0028" REF.END="QE0028"/>Article 8 CDR<QUOT.END REF.START="QS0028" CODE="2019" ID="QE0028"/>, <HT TYPE="ITALIC">Community Design Regulation (EC) No 6/2002 — A Commentary</HT>, edited by G.N. Hasselblatt, C.H. Beck, Munich, 2015, p. 137 et seq., paragraphs 34 to 48.</P></NOTE> Thus interpreted, Article 8(1) would be applicable in all cases where the need to fulfil a certain technical function was the sole factor that dictated the design in question, without any effect on its physiognomy or its aesthetic quality, and the possible existence of design alternatives which could fulfil the same function is not crucial.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0022"><NO.P>22.</NO.P><TXT>Although the Court is obviously not bound by these previous rulings, I note that, after being inclined towards the multiplicity of forms theory in the past, EUIPO has opted for the causality theory in its more recent decision-making practice,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0013"><P>Namely since the decision of the Third Board of Appeal of OHIM of <DATE ISO="20091022">22 October 2009</DATE> in Case R 690/2007-3, <HT TYPE="ITALIC">Lindner Recyclingtech</HT> v <HT TYPE="ITALIC">Franssons Verkstäder</HT> (<QUOT.START CODE="2018" ID="QS0029" REF.END="QE0029"/>Chaff cutters<QUOT.END REF.START="QS0029" CODE="2019" ID="QE0029"/>). I would point out that that decision was challenged in an action and an appeal, in which neither the General Court nor the Court of Justice ruled on the substantive application of Article 8 (see orders of <REF.DOC.ECR><DATE ISO="20100510">10 May 2010</DATE>, <NAME.CASE><HT TYPE="ITALIC">Franssons Verkstäder</HT> v <HT TYPE="ITALIC">OHIM</HT> — <HT TYPE="ITALIC">Lindner Recyclingtech</HT> (<HT TYPE="ITALIC">Chaff</HT> Cutters)</NAME.CASE>, <NO.CASE>T‑98/10</NO.CASE>, not published, <NO.ECLI ECLI="ECLI:EU:T:2010:180">EU:T:2010:180</NO.ECLI></REF.DOC.ECR>, and of <REF.DOC.ECR><DATE ISO="20100909">9 September 2010</DATE>, <NAME.CASE><HT TYPE="ITALIC">Franssons Verkstäder</HT> v <HT TYPE="ITALIC">OHIM and Lindner Recyclingtech</HT></NAME.CASE>, <NO.CASE>C‑290/10 P</NO.CASE>, not published, <NO.ECLI ECLI="ECLI:EU:C:2010:511">EU:C:2010:511</NO.ECLI></REF.DOC.ECR>).</P></NOTE> considering that Article 8(1) of Regulation No 6/2002 denies protection to those features of a product’s appearance that were adopted exclusively in order to permit the product to fulfil its technical function, as opposed to features that were selected, at least to some degree, for the purpose of enhancing the product’s visual appearance, which are eligible for<?PAGE NO="6"?> protection.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0014"><P>See decision of OHIM in Case R 690/2007-3, cited above (footnote 13), paragraph 28 et seq., especially paragraphs 35 and 36. The rejection of the <QUOT.START CODE="2018" ID="QS0030" REF.END="QE0030"/>alternative shapes<QUOT.END REF.START="QS0030" CODE="2019" ID="QE0030"/> criterion is expressly confirmed in the EUIPO Guidelines for examination of design invalidity applications for registered Community designs, version of <DATE ISO="20170201">1 February 2017</DATE>, p. 30, paragraph 5.3.3, citing in particular the decision of the Third Board of Appeal of OHIM of <DATE ISO="20160127">27 January 2016</DATE> in Joined Cases R 1517/2014-3 and R 2114/2014-3, <QUOT.START CODE="2018" ID="QS0031" REF.END="QE0031"/>Hoses<QUOT.END REF.START="QS0031" CODE="2019" ID="QE0031"/> (see paragraph 65). The developments are traced by Barber Giner, T., <QUOT.START CODE="2018" ID="QS0032" REF.END="QE0032"/>Estética y funcionalidad: alcance de la prohibición del diseño funcional en la legislación nacional y comunitaria<QUOT.END REF.START="QS0032" CODE="2019" ID="QE0032"/>, <HT TYPE="ITALIC">Diario La Ley</HT>, No 8422, XXXV, <DATE ISO="20141117">17 November 2014</DATE>, p. 768 to 770, and Brancusi, L., <QUOT.START CODE="2018" ID="QS0033" REF.END="QE0033"/>Design determined by the product’s technical function: arguments for an autonomous test<QUOT.END REF.START="QS0033" CODE="2019" ID="QE0033"/>, <HT TYPE="ITALIC">E.I.P.R</HT>., 2016, vol. 38(1), p. 25 et seq.</P></NOTE> It seems that case-law has developed along similar lines, particularly in France<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0015"><P>See in particular Greffe, F., and Greffe, P., <HT TYPE="ITALIC">Traité des dessins et des modèles — France, Union européenne, Suisse, continent américain</HT>, LexisNexis, Paris, 9th edition, 2014, paragraphs 155 to 186, and Raynard, J., Py, E., and Tréfigny, P., <HT TYPE="ITALIC">Droit de la propriété industrielle</HT>, LexisNexis, Paris, 2016, paragraphs 534 to 536.</P></NOTE> and the United Kingdom.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0016"><P>The United Kingdom Government asserts that the current state of positive law is consistent with the decision of OHIM in Case R 690/2007-3, cited above (footnote 13), referring to the judgment of the High Court of Justice of England and Wales in <HT TYPE="ITALIC">Dyson Ltd</HT> v <HT TYPE="ITALIC">Vax</HT> [2010] EWHC 1923 (Pat), paragraphs 23 to 31.</P></NOTE> In the present case, CeramTec, the Greek Government, the United Kingdom Government and the Commission<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0017"><P>The Commission considers that the existence of design alternatives should nevertheless be taken into account among other indicators of the aesthetic value of the form to be assessed by the court hearing the case. See also point 64 of this Opinion.</P></NOTE> have all supported this latter theory. That is also my point of view, for the reasons set out below.</TXT></NP.ECR></GR.SEQ><GR.SEQ LEVEL="3"><TITLE><TI><NP><NO.P><HT TYPE="ITALIC">2.</HT></NO.P><TXT><HT TYPE="ITALIC">The bases for the proposed interpretation</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0023"><NO.P>23.</NO.P><TXT>It can be stated, first of all, that, contrary to the claim made by DOCERAM, the <HT TYPE="ITALIC">wording</HT> of the provisions of Regulation No 6/2002 does not offer any guidance which is immediately helpful in answering the first question, since the concept of <QUOT.START CODE="2018" ID="QS0034" REF.END="QE0034"/>features of appearance of a product … solely dictated by its technical function<QUOT.END REF.START="QS0034" CODE="2019" ID="QE0034"/> in Article 8(1) is not defined there and no assessment criteria are provided for. In particular, there is absolutely no mention of the criterion of the absence of design alternatives for the product concerned, as advocated by the supporters of the multiplicity of forms theory.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0024"><NO.P>24.</NO.P><TXT>According to the Court’s settled case-law, it follows from the need for a uniform application of EU law that, where an EU act makes no reference to the law of the Member States for the definition of a particular concept, as in this case, that concept must be given an autonomous interpretation by the Court, which must take into account the overall scheme, the objectives and the origin of that instrument of EU law.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0018"><P>See in particular judgments of <REF.DOC.ECR><DATE ISO="20170309">9 March 2017</DATE>, <NAME.CASE><HT TYPE="ITALIC">Pula Parking</HT></NAME.CASE> (<NO.CASE>C‑551/15</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2017:193">EU:C:2017:193</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0042">42</REF.NP.ECR></REF.DOC.ECR>), and of <REF.DOC.ECR><DATE ISO="20170907">7 September 2017</DATE>, <NAME.CASE><HT TYPE="ITALIC">Schottelius</HT></NAME.CASE> (<NO.CASE>C‑247/16</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2017:638">EU:C:2017:638</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0031">31</REF.NP.ECR></REF.DOC.ECR>).</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0025"><NO.P>25.</NO.P><TXT>As regards <HT TYPE="ITALIC">the overall scheme</HT> of Regulation No 6/2002, I note that recital 10 of the regulation provides interesting but limited illumination as to the meaning of Article 8(1), stating that <QUOT.START CODE="2018" ID="QS0035" REF.END="QE0035"/>[t]echnological innovation should not be hampered by granting design protection to features dictated solely by a technical function. It is understood that this does not entail that a design must have an aesthetic quality<QUOT.END REF.START="QS0035" CODE="2019" ID="QE0035"/>.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0026"><NO.P>26.</NO.P><TXT>I will discuss further below the implications of the first sentence of that recital in connection with the purposes of Article 8(1).<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0019"><P>See point 38 et seq. of this Opinion.</P></NOTE> As regards the second sentence,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0020"><P>I note that the reference made at the end of the relevant sentence of recital 10 in French, the original language of this Opinion, forms a second sentence in the German version which is cited by the referring court.</P></NOTE> the referring court states that the opponents of the causality theory claim that that theory, which seeks to dissociate the purely technical features of the product from decorative features, runs counter to the statement that it is not necessary for a design to have an aesthetic quality in order to be able to be protected.</TXT></NP.ECR><?PAGE NO="7"?><NP.ECR IDENTIFIER="NP0027"><NO.P>27.</NO.P><TXT>It is true that such a requirement is not expressly laid down in Articles 4 to 6 of Regulation No 6/2002 either, which set out the requirements for protection of Community designs. Similarly, the second sentence of recital 10 of the regulation states that it cannot be inferred from the ground for refusal under Article 8(1) that only forms having an aesthetic quality can benefit from protection as designs. In my view, the expression <QUOT.START CODE="2018" ID="QS0036" REF.END="QE0036"/>this does not entail that a design must have an aesthetic quality<QUOT.END REF.START="QS0036" CODE="2019" ID="QE0036"/> means only that it is not essential for the appearance of the product in question to have an aesthetic aspect in order to be able to be protected.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0028"><NO.P>28.</NO.P><TXT>Like CeramTec and the Greek and United Kingdom Governments, I consider that, even though the aesthetic qualities of the product in question do not constitute a crucial assessment criterion for the grant of such protection, it would be wrong to conclude that it is not the visual appearance of products that the Community design is intended to protect. As OHIM (now EUIPO) has stated,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0021"><P>See decision of OHIM in Case R 690/2007-3, cited above (footnote 13), paragraph 34.</P></NOTE> it is clear from the definition of <QUOT.START CODE="2018" ID="QS0037" REF.END="QE0037"/>design<QUOT.END REF.START="QS0037" CODE="2019" ID="QE0037"/> in Article 3(a) of Regulation No 6/2002, which expressly mentions the <QUOT.START CODE="2018" ID="QS0038" REF.END="QE0038"/>appearance<QUOT.END REF.START="QS0038" CODE="2019" ID="QE0038"/> of the product,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0022"><P><QUOT.START CODE="2018" ID="QS0039" REF.END="QE0039"/>Design<QUOT.END REF.START="QS0039" CODE="2019" ID="QE0039"/> is defined there as <QUOT.START CODE="2018" ID="QS0040" REF.END="QE0040"/>the appearance of the whole or a part of a product resulting from the features of, in particular, the lines, contours, colours, shape, texture and/or materials of the product itself and/or its ornamentation<QUOT.END REF.START="QS0040" CODE="2019" ID="QE0040"/>.</P></NOTE> and from the requirements of visibility, which are set out in both Article 4(2)<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0023"><P>See the citation in point 5 of this Opinion.</P></NOTE> and recital 12,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0024"><P>According to recital 12, <QUOT.START CODE="2018" ID="QS0041" REF.END="QE0041"/>[p]rotection should not be extended to those component parts which are not visible during normal use of a product, nor to those features of such part which are not visible when the part is mounted ...<QUOT.END REF.START="QS0041" CODE="2019" ID="QE0041"/>.</P></NOTE> that the examination of the external appearance, whatever its specific merit,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0025"><P>The United Kingdom Government also used the term <QUOT.START CODE="2018" ID="QS0042" REF.END="QE0042"/>merit<QUOT.END REF.START="QS0042" CODE="2019" ID="QE0042"/>, although it does not appear in Regulation No 6/2002, to designate, as here, whether the design actually succeeds in making the product attractive because of its design.</P></NOTE> is decisive for protection by the rights conferred by a Community design.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0026"><P>See, to that effect, judgment of <REF.DOC.ECR><DATE ISO="20170921">21 September 2017</DATE>, <NAME.CASE><HT TYPE="ITALIC">Easy Sanitary Solutions and EUIPO</HT> v <HT TYPE="ITALIC">Group Nivelles</HT></NAME.CASE> (<NO.CASE>C‑361/15 P and C‑405/15 P</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2017:720">EU:C:2017:720</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0062">62</REF.NP.ECR></REF.DOC.ECR> et seq.).</P></NOTE> I would add that emphasis is also placed on the visual aspect in Article 10(1) of the regulation, under which the product concerned must be distinguishable from previous protected designs.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0027"><P>According to paragraph 1, <QUOT.START CODE="2018" ID="QS0043" REF.END="QE0043"/>[t]he scope of the protection conferred by a Community design shall include any design which does not produce on the informed user a different overall impression<QUOT.END REF.START="QS0043" CODE="2019" ID="QE0043"/>.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0029"><NO.P>29.</NO.P><TXT>Consequently, in my view it is compatible with the wording of recital 10 of Regulation No 6/2002 to interpret Article 8(1) as not referring to cases where the features in question are the only means of fulfilling the technical function of a product, but to cases where the need to achieve that function is the only factor to explain the adoption of those features. In other words, I think that the features of appearance of the product must be considered to be solely dictated by the objective of achieving a certain technical solution and that those features therefore come under the exclusion in Article 8(1) where it appears that other kinds of considerations, in particular visual ones, played no part in the adoption of the design concerned. The key question is where the formal constraints connected with the product’s technical function stop and where its designer’s freedom of choice starts.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0028"><P>Specifically, the technical function may, for example, be intended to provide more grip, convenience, comfort, efficiency or safety, as opposed to the development of ornamental, decorative, aesthetic or fanciful forms (see Cohen, D., <HT TYPE="ITALIC">Le droit des dessins et modèles — Droit communautaire, droit international, droit français et autres droits étrangers</HT>, Economica, Paris, 2nd edition, 2004, paragraph 65, and Greffe, F., and Greffe, P., op. cit. footnote 15, paragraph 159).</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0030"><NO.P>30.</NO.P><TXT>Acknowledgment that this provision is an exception, which means that it should be interpreted strictly according to the referring court, does not call my analysis into question. This point cannot in itself lead to the acceptance of a criterion, in this case the multiplicity of forms criterion, which further restricts the cases where the exclusion is applicable<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0029"><P>See end of point 19 of this Opinion.</P></NOTE> but does not have an obvious legal basis either in the text of Regulation No 6/2002 itself or in the light of its origins or objectives as set by the EU legislature.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0031"><NO.P>31.</NO.P><TXT>In my view, my proposed interpretation is supported by an analysis of the <HT TYPE="ITALIC">origin</HT> of Regulation No 6/2002, and Article 8(1) in particular.</TXT></NP.ECR><?PAGE NO="8"?><NP.ECR IDENTIFIER="NP0032"><NO.P>32.</NO.P><TXT>CeramTec asserts that the multiplicity of forms criterion should not be applied on the ground that the proposal to introduce it into EU legislation was not accepted. The Greek Government also bases a series of arguments on the <HT TYPE="ITALIC">travaux préparatoires</HT> for the regulation.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0033"><NO.P>33.</NO.P><TXT>I note in this regard that in its 1991 Green Paper on the Legal Protection of Industrial Design the Commission explained that protection was excluded for features dictated exclusively by the technical function of the product in question, a rule which already existed in the vast majority of Member States,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0030"><P>With regard to certain earlier national systems, see in particular Mouncif-Moungache, M., <HT TYPE="ITALIC">Les dessins et modèles en droit de l’Union européenne</HT>, Thèse, Bruylant, Brussels, 2012, p. 121 et seq.</P></NOTE> by comments that seem to fluctuate, in substance, between the multiplicity of forms theory and the causality theory, which, in my view, are linked respectively to the absence of design alternatives in the light of the final form of the product and to the failure by the designer to make a creative contribution in developing the product.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0031"><P>Working document published in June 1991 (III/F/5131/91-EN), p. 65, paragraph 5.4.6: <QUOT.START CODE="2018" ID="QS0044" REF.END="QE0044"/>If a technical effect can be achieved <HT TYPE="ITALIC">only by a given form</HT>, the design cannot be protected. On the other hand, <HT TYPE="ITALIC">if the designer has a choice among various forms</HT> in order to arrive at the technical effect, the features in question can be protected. Understood in this way the exclusion … corresponds exactly to the idea/expression dichotomy of copyright law. What is meant is <HT TYPE="ITALIC">in reality</HT> that <HT TYPE="ITALIC">if there is no choice</HT> when designing a product with a given effect, <HT TYPE="ITALIC">there is no personal creativity displayed</HT> and consequently nothing to protect<QUOT.END REF.START="QS0044" CODE="2019" ID="QE0044"/> (emphasis added).</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0034"><NO.P>34.</NO.P><TXT>In the Commission’s original proposal from 1993, which led to the adoption of Regulation No 6/2002, Article 9(1) (now Article 8(1) of the regulation) was entitled <QUOT.START CODE="2018" ID="QS0045" REF.END="QE0045"/>Non-arbitrary technical designs ...<QUOT.END REF.START="QS0045" CODE="2019" ID="QE0045"/> and worded as follows: <QUOT.START CODE="2018" ID="QS0046" REF.END="QE0046"/>A Community Design right shall not subsist in a design to the extent that the realisation of a technical function leaves no freedom as regards arbitrary features of appearance<QUOT.END REF.START="QS0046" CODE="2019" ID="QE0046"/>.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0032"><P>See Proposal for a European Parliament and Council Regulation on the Community Design of <DATE ISO="19931203">3 December 1993</DATE> (COM(93) 342 final, p. 57). The use of the word <QUOT.START CODE="2018" ID="QS0047" REF.END="QE0047"/>arbitrary<QUOT.END REF.START="QS0047" CODE="2019" ID="QE0047"/> was questioned by the Economic and Social Committee (see Opinion of <DATE ISO="19950222">22 February 1995</DATE>, <REF.DOC.OJ COLL="C" NO.OJ="110" PAGE.FIRST="14" DATE.PUB="1995">OJ 1995 C 110, p. 14</REF.DOC.OJ>, paragraph 5.7).</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0035"><NO.P>35.</NO.P><TXT>The explanatory memorandum for that proposal for a regulation<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0033"><P>According to paragraph 8.2 of the explanatory memorandum (COM(93) 342 final, p. 7), <QUOT.START CODE="2018" ID="QS0048" REF.END="QE0048"/>[d]esigns are features of appearance which can be perceived by the human senses. No aesthetic criteria are applied. Aesthetic and functional designs are equally protectable. However, features necessary to achieve a technical function and which leave no freedom as regards arbitrary elements are unprotectable ...<QUOT.END REF.START="QS0048" CODE="2019" ID="QE0048"/>.</P></NOTE> and the commentary on Article 9(1) thereof<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0034"><P>According to the commentary on that provision, <QUOT.START CODE="2018" ID="QS0049" REF.END="QE0049"/>[n]o distinction is made in the Regulation between aesthetic and functional designs; they are equally able to attract protection. In extremely rare cases, the form follows the function without any possibility of variation. In such cases, the designer cannot claim that the result is due to personal creativity. The design has, in fact, no individual character and cannot attract protection. … Therefore, the provision provides for unprotectability to the extent only that there is no freedom as regards arbitrary elements of design<QUOT.END REF.START="QS0049" CODE="2019" ID="QE0049"/> (COM(93) 342 final, p. 15).</P></NOTE> state, first of all, that the aesthetic aspect of the product is not crucial in itself, as both designs that tend towards a certain aesthetic and designs that fulfil a certain practical use are equally protectable. Above all, these extracts emphasise that Community design protection is refused in rare cases where <QUOT.START CODE="2018" ID="QS0050" REF.END="QE0050"/>the form follows the function without any possibility of variation<QUOT.END REF.START="QS0050" CODE="2019" ID="QE0050"/>, as the designer has <QUOT.START CODE="2018" ID="QS0051" REF.END="QE0051"/>no freedom<QUOT.END REF.START="QS0051" CODE="2019" ID="QE0051"/> in the design of the product and <QUOT.START CODE="2018" ID="QS0052" REF.END="QE0052"/>cannot [therefore] claim that the result is due to personal creativity<QUOT.END REF.START="QS0052" CODE="2019" ID="QE0052"/> and that the design has <QUOT.START CODE="2018" ID="QS0053" REF.END="QE0053"/>individual character<QUOT.END REF.START="QS0053" CODE="2019" ID="QE0053"/>.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0035"><P>Similarly, recital 9 of that proposal refers to <QUOT.START CODE="2018" ID="QS0054" REF.END="QE0054"/>designs produced to meet a functional requirement and providing no opportunity for inclusion of further and arbitrary design features<QUOT.END REF.START="QS0054" CODE="2019" ID="QE0054"/> (p. 51) and the commentary on Article 27(1) mentions <QUOT.START CODE="2018" ID="QS0055" REF.END="QE0055"/>the case where the specific features of the design are not eligible for protection because they are entirely dictated by a technical function leaving no freedom for arbitrary design<QUOT.END REF.START="QS0055" CODE="2019" ID="QE0055"/> (p. 22).</P></NOTE></TXT></NP.ECR><?PAGE NO="9"?><NP.ECR IDENTIFIER="NP0036"><NO.P>36.</NO.P><TXT>Furthermore, according to the amended proposal from 1999,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0036"><P>See Amended Proposal for a Council Regulation (EC) on Community Design of <DATE ISO="19990621">21 June 1999</DATE> (COM(1999) 310 final), explanation as to Article 9.</P></NOTE> the present wording of Article 8(1) of Regulation No 6/2002 was aligned with that of Article 7(1) of Directive 98/71/EC on the legal protection of designs,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0037"><P>Directive of the European Parliament and of the Council of <DATE ISO="19981013">13 October 1998</DATE> (<REF.DOC.OJ COLL="L" NO.OJ="289" PAGE.FIRST="28" DATE.PUB="1998">OJ 1998 L 289, p. 28</REF.DOC.OJ>).</P></NOTE> which seeks to harmonise the applicable laws of the Member States.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0038"><P>Laws whose effects are limited to the territory of the Member State concerned, contrary to the system established by Regulation No 6/2002 (see recitals 1 to 6 of that regulation).</P></NOTE> The <HT TYPE="ITALIC">travaux préparatoires</HT> for Directive 98/71 confirm that the absence of freedom of choice for the designer in designing the product and the fact that the chosen form is dictated solely by the technical function were seen, from the very start, as crucial factors in refusing protection, both in the initial proposal for that directive from 1993<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0039"><P>Article 7(1) of that initial proposal for a directive of <DATE ISO="19931203">3 December 1993</DATE> (COM(93) 344 final) was worded as follows: <QUOT.START CODE="2018" ID="QS0056" REF.END="QE0056"/>A design right shall not subsist in a design to the extent that the realisation of a technical function leaves no freedom as regards arbitrary features of appearance<QUOT.END REF.START="QS0056" CODE="2019" ID="QE0056"/> and, according to the explanatory memorandum, <QUOT.START CODE="2018" ID="QS0057" REF.END="QE0057"/>competition will be encouraged in areas where designs will be made ineligible for protection — for example because fulfilment of a technical function leaves no design freedom’(see p. 11 and p. 17).</P></NOTE> and in the amended proposal from 1996.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0040"><P>See, in the amended proposal for a directive of <DATE ISO="19960221">21 February 1996</DATE> (COM(96) 66 final), the commentary on Article 7(1), which states that <QUOT.START CODE="2018" ID="QS0058" REF.END="QE0058"/>[a]lthough the question whether a design does or does not contain any aesthetic elements is irrelevant in the context of the requirements for protection, as set out in the Proposal, the need was felt for a provision indicating that protection should not be available in those extremely rare cases where form necessarily follows function. … [T]he Commission felt that clearer wording was needed, especially after the amendment proposed as regards paragraph (2)<QUOT.END REF.START="QS0058" CODE="2019" ID="QE0058"/> (p. 7). Article 7(1) now referred to <QUOT.START CODE="2018" ID="QS0059" REF.END="QE0059"/>features of appearance of a product which are solely dictated by its technical function<QUOT.END REF.START="QS0059" CODE="2019" ID="QE0059"/>, the wording adopted in Article 8(1) of Regulation No 6/2002.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0037"><NO.P>37.</NO.P><TXT>It would seem that no criterion equivalent to the existence of design alternatives or the multiplicity of forms was adopted in the abovementioned draft legislation, but that the causality criterion was favoured instead. There is no requirement that the feature in question is the <HT TYPE="ITALIC">only means</HT> by which the desired technical function can be achieved. The exclusion laid down in Article 8(1) of Regulation No 6/2002 is motivated mainly by the absence of creative influence on the part of the designer over the appearance of the product, since only added value stemming from intellectual effort independent of that function justifies design protection. It seems that in its decision-making practice EUIPO has recently tended to give greater prominence to whether or not the designer had a degree of freedom in developing the product in question.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0041"><P>See Brancusi, L., <QUOT.START CODE="2018" ID="QS0060" REF.END="QE0060"/>Article 8 CDR<QUOT.END REF.START="QS0060" CODE="2019" ID="QE0060"/>, op. cit. footnote 12, p. 140, paragraph 47, and the latter approach, described as <QUOT.START CODE="2018" ID="QS0061" REF.END="QE0061"/>more flexible<QUOT.END REF.START="QS0061" CODE="2019" ID="QE0061"/>, mentioned in the report on the study carried out for the Commission, <DATE ISO="20160603">3 June 2016</DATE>, <HT TYPE="ITALIC">Legal review on industrial design protection in Europe</HT>, pp. 89, 91 and 92.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0038"><NO.P>38.</NO.P><TXT>As regards the <HT TYPE="ITALIC">objectives</HT> pursued by the regulation, and Article 8(1) in particular, it is not disputed by the parties — and it is, moreover, undeniable in my view — that that provision is intended mainly to prevent features of a product which are solely technical in origin being <QUOT.START CODE="2018" ID="QS0062" REF.END="QE0062"/>monopolis[ed]<QUOT.END REF.START="QS0062" CODE="2019" ID="QE0062"/><NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0042"><P>According to paragraph 8.2 of the explanatory memorandum for the initial proposal (COM(93) 342 final, p. 7), <QUOT.START CODE="2018" ID="QS0063" REF.END="QE0063"/>... features necessary to achieve a technical function … are unprotectable in order not to monopolise technical functions by way of design protection<QUOT.END REF.START="QS0063" CODE="2019" ID="QE0063"/>.</P></NOTE> through their protection as Community designs<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0043"><P>I note that a similar objective was pursued by the repair clause in Article 110(1) of Regulation No 6/2002, the original wording of which contained a reference to products <QUOT.START CODE="2018" ID="QS0064" REF.END="QE0064"/>upon whose appearance the protected design is dependent<QUOT.END REF.START="QS0064" CODE="2019" ID="QE0064"/>, which was, however, removed in the course of the legislative work. In this regard, see my Opinion in <REF.DOC.ECR><NAME.CASE><HT TYPE="ITALIC">Acacia and D’Amato</HT></NAME.CASE> (<NO.CASE>C‑397/16 and C‑435/16</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2017:730">EU:C:2017:730</NO.ECLI>, point <REF.NP.ECR REF="NP0038">38</REF.NP.ECR></REF.DOC.ECR> et seq.).</P></NOTE> and to ensure that <QUOT.START CODE="2018" ID="QS0065" REF.END="QE0065"/>[t]echnological innovation should not be hampered<QUOT.END REF.START="QS0065" CODE="2019" ID="QE0065"/><NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0044"><P>See the beginning of the first sentence of recital 10 of Regulation No 6/2002.</P></NOTE> because such protection reduces the availability of technical solutions for other economic operators.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0045"><P>In its observations the Commission rightly states that excluding from design protection features of appearance which serve solely to implement a technical solution ensures free competition between the suppliers of products using that technical solution.</P></NOTE> Finding a balance between protecting innovation and creativity and safeguarding fair and profitable competition for all Community undertakings was one of the concerns of the legislature.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0046"><P>See section 9 of the explanatory memorandum for the initial proposal (COM(93) 342 final, p. 8) and recital 7 of Regulation No 6/2002.</P></NOTE></TXT></NP.ECR><?PAGE NO="10"?><NP.ECR IDENTIFIER="NP0039"><NO.P>39.</NO.P><TXT>Furthermore, it is clear from the <HT TYPE="ITALIC">travaux préparatoires</HT> for Regulation No 6/2002 that a further purpose of Article 8(1) is to draw the separation line between the rules on patents and the rules on designs.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0047"><P>The coexistence of those rules is confirmed in recital 31 and Article 96 of Regulation No 6/2002. See also the Green Paper on the Legal Protection of Industrial Design, op. cit. footnote 31, p. 65, paragraph 5.4.6.1.</P></NOTE> Any protection of technical innovations must come under the former rules<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0048"><P>According to paragraph 8.2 of the explanatory memorandum for the initial proposal (COM(93) 342 final, p. 9), <QUOT.START CODE="2018" ID="QS0066" REF.END="QE0066"/>... features necessary to achieve a technical function … may be protectable under patent law or utility model law provided the requirements for such protection are fulfilled<QUOT.END REF.START="QS0066" CODE="2019" ID="QE0066"/>.</P></NOTE> provided the conditions for patentability are met. As CeramTec states, it may prove more difficult to obtain a patent in some cases, as that property right requires that it be demonstrated that there exists an invention meeting strict requirements,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0049"><P>In particular, the invention must be new, involve an inventive step and be susceptible of industrial application under Articles 52 to 57 of the Convention on the Grant of European Patents, signed at Munich on <DATE ISO="19731005">5 October 1973</DATE> (<QUOT.START CODE="2018" ID="QS0067" REF.END="QE0067"/>the Munich Convention<QUOT.END REF.START="QS0067" CODE="2019" ID="QE0067"/>), the text of which is available at: http://www.epo.org/law-practice/legal-texts/html/epc/2016/e/ma1.html</P></NOTE> and less attractive, as the term of protection offered may be less than is guaranteed by designs.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0050"><P>Namely 20 years in principle for the European patent (see Article 63 of the Munich Convention) and up to 25 years for registered Community designs (see Article 12 of Regulation No 6/2002), as is the case in the main proceedings.</P></NOTE> It was therefore necessary to avoid the risk of the provisions applicable to patents being circumvented by preventing the possibility of technical solutions being protected as designs.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0040"><NO.P>40.</NO.P><TXT>In my view, opting for a criterion which, like multiplicity of forms, seriously limits the scope of the exclusion under Article 8(1)<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0051"><P>See the end of point 19 of this Opinion.</P></NOTE> could deprive that provision of its full effectiveness and thus prevent the above objectives being achieved, by permitting the appropriation of purely technical forms for which variants exist.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0052"><P>See also decision of OHIM in Case R 690/2007-3, cited above (footnote 13), paragraphs 28 and 30, and Brancusi, L., <QUOT.START CODE="2018" ID="QS0068" REF.END="QE0068"/>Article 8 CDR<QUOT.END REF.START="QS0068" CODE="2019" ID="QE0068"/>, op. cit. footnote 12, pp. 136 and 137, paragraph 33.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0041"><NO.P>41.</NO.P><TXT>Like CeramTec and the United Kingdom Government, I take the view that it is nearly always possible to modify the appearance of features of a product slightly, but sufficiently,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0053"><P>Under Article 5(2) of Regulation No 6/2002, which provides that a design is deemed to be identical to an existing design, and not therefore protectable, if their features differ only in immaterial details.</P></NOTE> without affecting the desired technical function. It is therefore possible that several conceivable forms of a technical solution, or indeed all of them, could be monopolised through design protection, which would hamper the technological innovation that Regulation No 6/2002 seeks to promote. If the criterion advocated by DOCERAM were adopted, a single economic operator would be able to obtain several registrations, as a Community design, of different forms of a product, thereby benefiting from exclusive protection which is, in practice, equivalent to that offered by a patent, but without being subject to the related restrictions, which could thus be circumvented.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0042"><NO.P>42.</NO.P><TXT>CeramTec asserts in this regard that in the dispute in the main proceedings, by seeking protection for 17 form variants of a centring pin in three different basic models, DOCERAM has not left other market operators any opportunity to use alternative forms of those products, as there are no other technically relevant forms in the field of projection welding that are capable of producing a different overall impression of the product in accordance with Article 6(1) of the regulation.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0043"><NO.P>43.</NO.P><TXT>Lastly, my recommended interpretation has the advantage that it is consistent with the <HT TYPE="ITALIC">case-law</HT> which has been developed by the Court <HT TYPE="ITALIC">in the field of trade marks</HT>.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0054"><P>See footnotes 59 and 61 to this Opinion.</P></NOTE> Contrary to what CeramTec seems to claim, that case-law cannot, in my view, be applied as such to the present case, given the differences that exist between the system of EU law for trade mark protection and the system for design protection.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0055"><P>With regard to the differences between the protection offered by trade marks and the protection offered by designs, in terms of their respective natures, scopes and terms, see Opinion of Advocate General Ruiz-Jarabo Colomer in <REF.DOC.ECR><NAME.CASE><HT TYPE="ITALIC">Philips</HT></NAME.CASE> (<NO.CASE>C‑299/99</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2001:52">EU:C:2001:52</NO.ECLI>, points <REF.NP.ECR REF="NP0036">36</REF.NP.ECR> to <REF.NP.ECR REF="NP0038">38</REF.NP.ECR></REF.DOC.ECR>).</P></NOTE> However, since provisions similar to those in Article 8(1) of Regulation<?PAGE NO="11"?> No 6/2002 can be found in the former system,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0056"><P>See the second indent of Article 3(1)(e) of First Council Directive 89/104/EEC of <DATE ISO="19881221">21 December 1988</DATE> to approximate the laws of the Member States relating to trade marks (<REF.DOC.OJ COLL="L" NO.OJ="040" PAGE.FIRST="1" DATE.PUB="1989">OJ 1989 L 40, p. 1</REF.DOC.OJ>), now Article 3(1)(e)(ii) of Directive 2008/95/EC of the European Parliament and of the Council of <DATE ISO="20081022">22 October 2008</DATE> to approximate the laws of the Member States relating to trade marks (<REF.DOC.OJ COLL="L" NO.OJ="299" PAGE.FIRST="25" DATE.PUB="2008">OJ 2008 L 299, p. 25</REF.DOC.OJ>), and Article 7(1)(e)(ii) of Council Regulation (EC) No 40/94 of <DATE ISO="19931220">20 December 1993</DATE> on the Community trade mark (<REF.DOC.OJ COLL="L" NO.OJ="011" PAGE.FIRST="1" DATE.PUB="1994">OJ 1994 L 11, p. 1</REF.DOC.OJ>), now Article 7(1)(e)(ii) of Council Regulation (EC) No 207/2009 of <DATE ISO="20090226">26 February 2009</DATE> on the European Union trade mark (<REF.DOC.OJ COLL="L" NO.OJ="078" PAGE.FIRST="1" DATE.PUB="2009">OJ 2009 L 78, p. 1</REF.DOC.OJ>).</P></NOTE> even though their wording is not completely the same,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0057"><P>The abovementioned provisions relating to trade mark law (see footnote 56) do not refer to <QUOT.START CODE="2018" ID="QS0069" REF.END="QE0069"/>features … solely dictated by [the] technical function [of the product]<QUOT.END REF.START="QS0069" CODE="2019" ID="QE0069"/>, but to <QUOT.START CODE="2018" ID="QS0070" REF.END="QE0070"/>the shape of goods which is necessary to obtain a technical result<QUOT.END REF.START="QS0070" CODE="2019" ID="QE0070"/>. According to Advocate General Ruiz-Jarabo Colomer, that discrepancy was not capricious and it meant that the level of functionality had to be greater in order to be able to assess the ground for refusal in the context of designs, the feature concerned having to be not only necessary but essential in order to achieve a particular technical result, such that form follows function. In his view, this meant that a functional design could nonetheless be eligible for protection if it could be shown that the same technical function could be achieved by another different form (see his Opinion in <REF.DOC.ECR><NAME.CASE><HT TYPE="ITALIC">Philips</HT></NAME.CASE>, <NO.CASE>C‑299/99</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2001:52">EU:C:2001:52</NO.ECLI>, point <REF.NP.ECR REF="NP0034">34</REF.NP.ECR></REF.DOC.ECR>). I do not concur with this view, given that it was expressed in an <HT TYPE="ITALIC">obiter dictum</HT> (see decision of OHIM in Case R 690/2007-3, cited above in footnote 13, paragraph 28) and that the Court did not rule on designs in the judgment of <REF.DOC.ECR><DATE ISO="20020618">18 June 2002</DATE>, <NAME.CASE><HT TYPE="ITALIC">Philips</HT></NAME.CASE> (<NO.CASE>C‑299/99</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2002:377">EU:C:2002:377</NO.ECLI></REF.DOC.ECR>).</P></NOTE> and in view of the relationship between these two categories of provisions,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0058"><P>Regulation No 40/94 on the Community trade mark was a <QUOT.START CODE="2018" ID="QS0071" REF.END="QE0071"/>legacy<QUOT.END REF.START="QS0071" CODE="2019" ID="QE0071"/> which the authors of Regulation No 6/2002 took as the basis for drafting (see Hiance, M., <QUOT.START CODE="2018" ID="QS0072" REF.END="QE0072"/>Le projet de règlement communautaire sur les dessins et modèles: les enjeux<QUOT.END REF.START="QS0072" CODE="2019" ID="QE0072"/>, <HT TYPE="ITALIC">Revue internationale de la propriété industrielle et artistique</HT>, 2000, No 201, p. 100).</P></NOTE> I consider that it is possible, and indeed appropriate, to take a view in the light of that case-law and, if necessary, to reason by analogy in the present case.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0044"><NO.P>44.</NO.P><TXT>I note in this connection that, with regard to the protection granted by trade marks, the Court has ruled that the objective of the abovementioned provisions of EU law, which correspond in essence to Article 8(1) of Regulation No 6/2002, is to prevent trade mark protection from granting its proprietor a monopoly on technical solutions or functional characteristics of goods which a user is likely to seek in the goods of competitors.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0059"><P>See in particular, with regard to Article 3(1)(e) of Directive 2008/95, judgment of <REF.DOC.ECR><DATE ISO="20150916">16 September 2015</DATE>, <NAME.CASE><HT TYPE="ITALIC">Société des Produits Nestlé</HT></NAME.CASE> (<NO.CASE>C‑215/14</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2015:604">EU:C:2015:604</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0044">44</REF.NP.ECR>, <REF.NP.ECR REF="NP0045">45</REF.NP.ECR> and <REF.NP.ECR REF="NP0055">55</REF.NP.ECR></REF.DOC.ECR>) and, with regard to Article 7(1)(e)(ii) of Regulation No 40/94, judgment of <REF.DOC.ECR><DATE ISO="20161110">10 November 2016</DATE>, <NAME.CASE><HT TYPE="ITALIC">Simba Toys</HT> v <HT TYPE="ITALIC">EUIPO</HT></NAME.CASE> (<NO.CASE>C‑30/15 P</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2016:849">EU:C:2016:849</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0039">39</REF.NP.ECR> and <REF.NP.ECR REF="NP0053">53</REF.NP.ECR></REF.DOC.ECR>).</P></NOTE> As I explained above,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0060"><P>See point 38 et seq. of this Opinion.</P></NOTE> this would also appear to be why protection under Community design law is excluded in the circumstances provided for in Article 8(1).</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0045"><NO.P>45.</NO.P><TXT>It is clear from various judgments of the Court regarding trade marks that <QUOT.START CODE="2018" ID="QS0073" REF.END="QE0073"/>a sign consisting exclusively of the shape of a product is unregistrable by virtue [of the provisions that were interpreted] if it is established that the essential functional features of that shape are attributable only to the technical result<QUOT.END REF.START="QS0073" CODE="2019" ID="QE0073"/>. The Court has held that <QUOT.START CODE="2018" ID="QS0074" REF.END="QE0074"/>the ground for refusal … of registration<QUOT.END REF.START="QS0074" CODE="2019" ID="QE0074"/> as a trade mark of <QUOT.START CODE="2018" ID="QS0075" REF.END="QE0075"/>the shape of goods which is necessary to obtain a technical result<QUOT.END REF.START="QS0075" CODE="2019" ID="QE0075"/> <QUOT.START CODE="2018" ID="QS0076" REF.END="QE0076"/>cannot be overcome by establishing that there are other shapes which allow the same technical result to be obtained<QUOT.END REF.START="QS0076" CODE="2019" ID="QE0076"/>, in accordance with those provisions. It based this rejection, which is implicit but clear in my view, of the multiplicity of forms theory in particular on the finding that the refusal of registration is not subject to the condition that the shape at issue is the only one which could achieve the intended technical result and on the observation that a significant number of alternative shapes might become unusable for the trade mark proprietor’s competitors if such a criterion were considered to be decisive.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0061"><P>See, with regard to the second indent of Article 3(1)(e) of Directive 89/104, judgment of <REF.DOC.ECR><DATE ISO="20020618">18 June 2002</DATE>, <NAME.CASE><HT TYPE="ITALIC">Philips</HT></NAME.CASE> (<NO.CASE>C‑299/99</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2002:377">EU:C:2002:377</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0081">81</REF.NP.ECR> to <REF.NP.ECR REF="NP0084">84</REF.NP.ECR></REF.DOC.ECR>); with regard to Article 3(1)(e) of Directive 2008/95, judgment of <REF.DOC.ECR><DATE ISO="20150916">16 September 2015</DATE>, <NAME.CASE><HT TYPE="ITALIC">Société des Produits Nestlé</HT></NAME.CASE> (<NO.CASE>C‑215/14</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2015:604">EU:C:2015:604</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0056">56</REF.NP.ECR></REF.DOC.ECR>), and, with regard to Article 7(1)(e)(ii) of Regulation No 40/94, judgment of <REF.DOC.ECR><DATE ISO="20100914">14 September 2010</DATE>, <NAME.CASE><HT TYPE="ITALIC">Lego Juris</HT> v <HT TYPE="ITALIC">OHIM</HT></NAME.CASE> (<NO.CASE>C‑48/09 P</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2010:516">EU:C:2010:516</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0053">53</REF.NP.ECR> to <REF.NP.ECR REF="NP0058">58</REF.NP.ECR></REF.DOC.ECR>).</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0046"><NO.P>46.</NO.P><TXT>In my view, these considerations are also relevant in the present case, given that, in this field too, it is not acceptable that Community designs are diverted from their purpose to offer protection to purely technical features of a product.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0062"><P>In support of an analogy with the position taken by the Court on trade marks, see in particular Greffe, F., and Greffe, P., op. cit. footnote 15, paragraphs 182 and 183, and Raynard, J., Py, E., and Tréfigny, P., op. cit. footnote 15, paragraph 536.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0047"><NO.P>47.</NO.P><TXT>Accordingly, in my view, the first question should be answered in the affirmative and the argument in support of acceptance of the <QUOT.START CODE="2018" ID="QS0077" REF.END="QE0077"/>multiplicity of forms<QUOT.END REF.START="QS0077" CODE="2019" ID="QE0077"/> criterion must therefore be rejected. More specifically, I take the view that Article 8(1) of Regulation No 6/2002 must be interpreted to the effect that, in order to determine whether features of appearance of a product are solely dictated by its<?PAGE NO="12"?> technical function, regard should not be had simply to the non-existence of alternative forms which could fulfil the same function, but it should be established that obtaining a certain technical function is the sole factor that dictated the choice of the design concerned and that no creative role was therefore played by its designer in this regard.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0048"><NO.P>48.</NO.P><TXT>In connection with this proposed interpretation, the referring court put forwards other queries concerning the specific application of the rule in Article 8(1), which are the subject of the second question referred for a preliminary ruling.</TXT></NP.ECR></GR.SEQ></GR.SEQ><GR.SEQ LEVEL="2"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">B.</HT></NO.P><TXT><HT TYPE="BOLD"><HT TYPE="ITALIC">The relevant assessment criteria for the purposes of the application of Article 8(1) of Regulation No 6/2002 (second question)</HT></HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0049"><NO.P>49.</NO.P><TXT>The second question is asked in the alternative, in case, as I suggest, the Court answers the first question to the effect that the relevant method for the purposes of the application of the exclusion laid down in Article 8(1) of Regulation No 6/2002 is to determine whether the features of appearance of the product in question are attributable solely to the desired technical function and not to establish the absence of design alternatives which could also fulfil that function.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0050"><NO.P>50.</NO.P><TXT>By this question, the referring court asks, first, from which point of view it is to be assessed whether the various design features of a product have been chosen solely for reasons of technical functionality and, second, if an <QUOT.START CODE="2018" ID="QS0078" REF.END="QE0078"/>objective observer<QUOT.END REF.START="QS0078" CODE="2019" ID="QE0078"/> is required, how that concept is to be defined.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0051"><NO.P>51.</NO.P><TXT>The referring court explains that in the judgment under appeal before it, the Landgericht Düsseldorf (Regional Court, Düsseldorf) held that the assessment must be objective and does not depend on the personal will of the designer of the design concerned, except possibly as an indication as to whether an objective, reasonable observer would conclude that imperatives of technical functionality dictated the design decision.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0063"><P>The referring court notes that the decision of OHIM in Case R 690/2007-3, cited above (footnote 13), adopted this approach.</P></NOTE> However, according to the opponents of this approach, it is difficult to assess the view of the <QUOT.START CODE="2018" ID="QS0079" REF.END="QE0079"/>objective observer<QUOT.END REF.START="QS0079" CODE="2019" ID="QE0079"/>, that is to say, a further person existing only in theory, on a case-by-case basis.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0052"><NO.P>52.</NO.P><TXT><HT TYPE="ITALIC">As regards the</HT> <HT TYPE="ITALIC">objective or subjective character of the assessment to be carried out</HT> with a view to the application of Article 8(1) of Regulation No 6/2002, the parties in the main proceedings and the interested parties which submitted observations to the Court agree that the designer’s subjective intention when he conceived the design at issue cannot constitute the key factor in determining whether that design was chosen on the basis of purely technical considerations. I also take this view.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0053"><NO.P>53.</NO.P><TXT>An objective approach to the assessment in question promotes a uniform application of that provision in all Member States and in each of their legal systems and it offers greater predictability, which increases legal certainty for economic operators. As DOCERAM and CeramTec note, in essence, if the presumed intention of the designer were the only relevant criterion, statements made by him would in themselves be crucial in determining whether or not the design concerned can be protected and, in the event of a dispute, he could be tempted to claim that he was guided by aesthetic concerns in choosing that design, in order to ensure that the exclusion laid down in Article 8(1) of Regulation No 6/2002 is not applied against his creation. It is essential, in my view, that the competent authorities are able to decide on the basis of assessment criteria which are not subjective, but are neutral and without any risk of partiality.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0054"><NO.P>54.</NO.P><TXT><HT TYPE="ITALIC">As regards the procedure to follow in carrying out an objective</HT> <HT TYPE="ITALIC">assessment</HT> whether the appearance of a product is dictated solely by its technical function within the meaning of Article 8(1) of Regulation No 6/2002, on the other hand, the positions taken before the Court are not consistent.</TXT></NP.ECR><?PAGE NO="13"?><NP.ECR IDENTIFIER="NP0055"><NO.P>55.</NO.P><TXT>I consider that the <HT TYPE="ITALIC">first problem</HT> raised by the question asked by the referring court, which mentions the possibility of considering the point of view of an <QUOT.START CODE="2018" ID="QS0080" REF.END="QE0080"/>objective observer<QUOT.END REF.START="QS0080" CODE="2019" ID="QE0080"/>, is whether or not <HT TYPE="ITALIC">reasoning should be based on a hypothetical person</HT> whose presumed assessment would serve as an archetype.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0056"><NO.P>56.</NO.P><TXT>In this regard, CeramTec asserts, first, that the expression <QUOT.START CODE="2018" ID="QS0081" REF.END="QE0081"/>objective observer<QUOT.END REF.START="QS0081" CODE="2019" ID="QE0081"/>, which appears both in the judgment under appeal before the referring court and in the second question referred for a preliminary ruling, is inspired by similar phrases which have been used, with variants, in the decision-making practice of EUIPO<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0064"><P>In particular, paragraph 36 of the decision of OHIM in Case R 690/2007-3, cited above (footnote 13), makes reference to the standpoint of a <QUOT.START CODE="2018" ID="QS0082" REF.END="QE0082"/>reasonable observer<QUOT.END REF.START="QS0082" CODE="2019" ID="QE0082"/>.</P></NOTE> and in legal literature.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0065"><P>CeramTec mentions the expressions <QUOT.START CODE="2018" ID="QS0083" REF.END="QE0083"/>relevant observer<QUOT.END REF.START="QS0083" CODE="2019" ID="QE0083"/> and <QUOT.START CODE="2018" ID="QS0084" REF.END="QE0084"/>reasonable observer persona<QUOT.END REF.START="QS0084" CODE="2019" ID="QE0084"/>, which are used, respectively, by Brancusi, L., <QUOT.START CODE="2018" ID="QS0085" REF.END="QE0085"/>Article 8 CDR<QUOT.END REF.START="QS0085" CODE="2019" ID="QE0085"/>, op. cit. footnote 12, p. 139, paragraph 41, and in the report on the study carried out for the Commission, op. cit. footnote 41, p. 90.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0057"><NO.P>57.</NO.P><TXT>Second, CeramTec submits that in order to ascertain whether Article 8(1) of Regulation No 6/2002 is applicable, regard should be had by analogy to the concept of <QUOT.START CODE="2018" ID="QS0086" REF.END="QE0086"/>informed user<QUOT.END REF.START="QS0086" CODE="2019" ID="QE0086"/> which is used in Article 6(1), Article 10(1) and recital 14 of the regulation<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0066"><P>Articles 6 and 10 concerning, respectively, the <QUOT.START CODE="2018" ID="QS0087" REF.END="QE0087"/>individual character<QUOT.END REF.START="QS0087" CODE="2019" ID="QE0087"/> which the design concerned must possess (like recital 14) and the <QUOT.START CODE="2018" ID="QS0088" REF.END="QE0088"/>scope of protection<QUOT.END REF.START="QS0088" CODE="2019" ID="QE0088"/> conferred by Regulation No 6/2002.</P></NOTE> and is defined in the case-law of the Court of Justice and of the General Court.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0067"><P>The concept of <QUOT.START CODE="2018" ID="QS0089" REF.END="QE0089"/>informed user<QUOT.END REF.START="QS0089" CODE="2019" ID="QE0089"/> must be understood as <QUOT.START CODE="2018" ID="QS0090" REF.END="QE0090"/><HT TYPE="ITALIC">lying somewhere between that of the average consumer</HT>, applicable in trade mark matters, who need not have any specific knowledge and who, as a rule, makes no direct comparison between the trade marks in conflict, and the sectoral expert, [applicable in patent matters,] who is an expert with detailed technical expertise. [It] may be understood as referring … to <HT TYPE="ITALIC">a particularly observant one</HT>, either because of his personal experience or his extensive knowledge of the sector in question<QUOT.END REF.START="QS0090" CODE="2019" ID="QE0090"/> (emphasis added) (see in particular judgments of <REF.DOC.ECR><DATE ISO="20111020">20 October 2011</DATE>, <NAME.CASE><HT TYPE="ITALIC">PepsiCo</HT> v <HT TYPE="ITALIC">Grupo Promer Mon Graphic</HT></NAME.CASE>, <NO.CASE>C‑281/10 P</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2011:679">EU:C:2011:679</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0053">53</REF.NP.ECR> and <REF.NP.ECR REF="NP0059">59</REF.NP.ECR></REF.DOC.ECR>, and of <REF.DOC.ECR><DATE ISO="20170921">21 September 2017</DATE>, <NAME.CASE><HT TYPE="ITALIC">Easy Sanitary Solutions and EUIPO</HT> v <HT TYPE="ITALIC">Group Nivelles</HT></NAME.CASE> (<NO.CASE>C‑361/15 P and C‑405/15 P</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2017:720">EU:C:2017:720</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0124">124</REF.NP.ECR> and <REF.NP.ECR REF="NP0125">125</REF.NP.ECR></REF.DOC.ECR>).</P></NOTE> According to CeramTec, in so far as the review must be conducted, as in this case, in the particular situation where all users of the products concerned are professionals, the <QUOT.START CODE="2018" ID="QS0091" REF.END="QE0091"/>informed user<QUOT.END REF.START="QS0091" CODE="2019" ID="QE0091"/> would then in practice correspond to the ‘specialist<QUOT.END REF.START="QS0057" CODE="2019" ID="QE0057"/>, who has technical expertise, a concept used to assess the innovative character of the patent.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0058"><NO.P>58.</NO.P><TXT>I do not consider it appropriate to adopt this proposal. Contrary to the claim made by CeramTec, the relevant criterion in assessing the existence of points of fact, in the context of Regulation No 6/2002, is not <QUOT.START CODE="2018" ID="QS0092" REF.END="QE0092"/>always the <QUOT.START CODE="201C" ID="QS0093" REF.END="QE0093"/>informed user<QUOT.END REF.START="QS0093" CODE="201D" ID="QE0093"/><QUOT.END REF.START="QS0092" CODE="2019" ID="QE0092"/>. In particular, it has been ruled that the informed user is not necessarily able to distinguish, beyond the experience gained by using the product concerned, the aspects of the appearance of the product which are dictated by the product’s technical function from those which are arbitrary.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0068"><P>See in particular judgments of the General Court of <REF.DOC.ECR><DATE ISO="20100622">22 June 2010</DATE>, <NAME.CASE><HT TYPE="ITALIC">Shenzhen Taiden</HT> v <HT TYPE="ITALIC">OHIM — Bosch Security Systems</HT> (Communications equipment)</NAME.CASE> (<NO.CASE>T‑153/08</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:T:2010:248">EU:T:2010:248</NO.ECLI>, paragraphs <REF.NP.ECR REF="NP0047">47</REF.NP.ECR> and <REF.NP.ECR REF="NP0048">48</REF.NP.ECR></REF.DOC.ECR>); of <REF.DOC.ECR><DATE ISO="20131121">21 November 2013</DATE>, <NAME.CASE><HT TYPE="ITALIC">El Hogar Perfecto del Siglo XXI</HT> v <HT TYPE="ITALIC">OHIM — Wenf International Advisers</HT> (Corkscrew)</NAME.CASE> (<NO.CASE>T‑337/12</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:T:2013:601">EU:T:2013:601</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0025">25</REF.NP.ECR></REF.DOC.ECR>); and of <REF.DOC.ECR><DATE ISO="20140312">12 March 2014</DATE>, <NAME.CASE><HT TYPE="ITALIC">Tubes Radiatori</HT> v <HT TYPE="ITALIC">OHIM — Antrax It</HT> (Radiator)</NAME.CASE> (<NO.CASE>T‑315/12</NO.CASE>, not published, <NO.ECLI ECLI="ECLI:EU:T:2014:115">EU:T:2014:115</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0061">61</REF.NP.ECR></REF.DOC.ECR>). In my view, this recurrent analysis by the General Court is well founded.</P></NOTE> The application of Article 8(1) of Regulation No 6/2002 actually necessitates a technical assessment, which requires specific skills that even an <QUOT.START CODE="2018" ID="QS0094" REF.END="QE0094"/>informed<QUOT.END REF.START="QS0094" CODE="2019" ID="QE0094"/> user does not always have. Consequently, the perspective of the <QUOT.START CODE="2018" ID="QS0095" REF.END="QE0095"/>informed user<QUOT.END REF.START="QS0095" CODE="2019" ID="QE0095"/> cannot, in my view, constitute the objective assessment criterion required here.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0059"><NO.P>59.</NO.P><TXT>Like the United Kingdom Government and the Commission, I consider that if the authors of Regulation No 6/2002 had wished to adopt a legal construct like <QUOT.START CODE="2018" ID="QS0096" REF.END="QE0096"/>objective observer<QUOT.END REF.START="QS0096" CODE="2019" ID="QE0096"/>, as the second question suggests, they would have mentioned it in Article 8(1), as they did expressly, with <QUOT.START CODE="2018" ID="QS0097" REF.END="QE0097"/>informed user<QUOT.END REF.START="QS0097" CODE="2019" ID="QE0097"/>, in Articles 6(1) and 10(1).<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0069"><P>In this regard, see in particular the commentary on Article 6(1) in the initial proposal for a regulation (COM(93) 342 final, p. 12).</P></NOTE> I further note that Article 8 also makes no reference to the<?PAGE NO="14"?> perception of other categories of hypothetical person, such as <QUOT.START CODE="2018" ID="QS0098" REF.END="QE0098"/>average potential buyer<QUOT.END REF.START="QS0098" CODE="2019" ID="QE0098"/>, a criterion which DOCERAM suggests before dismissing,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0070"><P>According to DOCERAM, such a buyer will often possess less extensive professional knowledge of the technical field to which the product belongs than, for example, the designer or the manufacturer, the consequence of which could be that the technical functions of certain features of appearance are perceived wrongly as aesthetic features.</P></NOTE> or <QUOT.START CODE="2018" ID="QS0099" REF.END="QE0099"/>average consumer<QUOT.END REF.START="QS0099" CODE="2019" ID="QE0099"/>, an element which the Commission notes was considered not to be decisive in itself in assessing the purely technical character of a shape in relation to trade marks.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0071"><P>It cites, to that effect, paragraphs 33 to 35 of the judgment of <REF.DOC.ECR><DATE ISO="20140918">18 September 2014</DATE>, <NAME.CASE><HT TYPE="ITALIC">Hauck</HT></NAME.CASE> (<NO.CASE>C‑205/13</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2014:2233">EU:C:2014:2233</NO.ECLI></REF.DOC.ECR>), which concern Article 3(1)(e) of Directive 89/104. According to the Commission, because the objective of that provision is comparable to the objective pursued by Article 8(1) of Regulation No 6/2002, it is logical also to apply similar criteria in connection with Article 8(1) in order to assess the design of a product’s appearance beyond technical constraints. In this regard, see also point 43 et seq. of this Opinion.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0060"><NO.P>60.</NO.P><TXT>The United Kingdom Government asserts, rightly in my view, that Articles 6(2) and 10(2) of Regulation No 6/2002 do not refer to the theoretical concept of <QUOT.START CODE="2018" ID="QS0100" REF.END="QE0100"/>informed user<QUOT.END REF.START="QS0100" CODE="2019" ID="QE0100"/> in assessing the <QUOT.START CODE="2018" ID="QS0101" REF.END="QE0101"/>degree of freedom of the designer in developing the design<QUOT.END REF.START="QS0101" CODE="2019" ID="QE0101"/><NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0072"><P>Even though the conditions laid down in paragraphs 1 and paragraphs 2 of Articles 6 and 10 respectively are complementary, as is clear from recital 14 of that regulation. In the specific assessment of the overall impression of the designs at issue on the informed user, the designer’s degree of freedom in developing the contested design must be taken into account, knowing that the more that freedom is restricted, the more likely minor differences between those designs will be sufficient to produce a different overall impression on the user (see in particular judgments of <REF.DOC.ECR><DATE ISO="20100318">18 March 2010</DATE>, <NAME.CASE><HT TYPE="ITALIC">Grupo Promer Mon Graphic</HT> v <HT TYPE="ITALIC">OHIM — PepsiCo</HT> (Representation of a circular promotional item)</NAME.CASE>, <NO.CASE>T‑9/07</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:T:2010:96">EU:T:2010:96</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0072">72</REF.NP.ECR></REF.DOC.ECR> et seq., and of <REF.DOC.ECR><DATE ISO="20170705">5 July 2017</DATE>, <NAME.CASE><HT TYPE="ITALIC">Gamet</HT> v <HT TYPE="ITALIC">EUIPO — <QUOT.START CODE="2018" ID="QS0102" REF.END="QE0102"/>Metal-Bud II<QUOT.END REF.START="QS0102" CODE="2019" ID="QE0102"/> Robert Gubała</HT> (Door handle)</NAME.CASE>, <NO.CASE>T‑306/16</NO.CASE>, not published, <NO.ECLI ECLI="ECLI:EU:T:2017:466">EU:T:2017:466</NO.ECLI>, paragraph <REF.NP.ECR REF="NP0043">43</REF.NP.ECR></REF.DOC.ECR> et seq.).</P></NOTE> and that the same — non-hypothetical — approach should be adopted in connection with Article 8(1), as here too the court hearing the dispute must evaluate objectively what comes under the technical function of the product, an aspect that is not eligible for protection, and where a role has been played by the freedom of the designer, whose creative work may be protected.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0073"><P>I note that in its initial proposal for a regulation (COM(93) 342 final, p. 16), the Commission stated that paragraph 2 of what became Article 10 of Regulation No 6/2002 was <QUOT.START CODE="2018" ID="QS0103" REF.END="QE0103"/>intended to <HT TYPE="ITALIC">give guidance to the courts</HT> in infringement cases<QUOT.END REF.START="QS0103" CODE="2019" ID="QE0103"/> (emphasis added). It added that <QUOT.START CODE="2018" ID="QS0104" REF.END="QE0104"/>[<HT TYPE="ITALIC">h]ighly functional designs where the designer must respect given parameters are likely to be more similar than designs in respect of which the designer enjoys total freedom</HT>. Therefore, paragraph 2 also establishes the principle that the freedom of the designer must be taken into consideration when the similarity between an earlier and a later design is being assessed<QUOT.END REF.START="QS0104" CODE="2019" ID="QE0104"/> (emphasis added).</P></NOTE> Such an evaluation on a case-by-case basis is already conducted, without major difficulty it would seem, by national courts<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0074"><P>The United Kingdom Government cites to that effect the judgment of the Court of Appeal of England and Wales (Civil Division), <HT TYPE="ITALIC">Dyson Ltd</HT> v <HT TYPE="ITALIC">Vax</HT> [2011] EWCA Civ 1206, paragraph 36.</P></NOTE> and by the members of OHIM (now EUIPO).<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0075"><P>By way of example, see the analysis conducted by the Invalidity Division of OHIM in its decision of <DATE ISO="20140317">17 March 2014</DATE> in Case ICD 8674, <HT TYPE="ITALIC">Extruplast</HT> v <HT TYPE="ITALIC">PVG Energy BV</HT>. In paragraph 17 it states that the designer knows that the degree of freedom in developing the design of the cans is limited by a number of constraints connected with its intended use, namely, in the case under examination, to contain, transport and store liquids. In that case, the choice of a cross in a rounded propeller shape on top, the width of its blades, its arrangement both on top and underneath, the wide grooves for its stacking, the arrangement of the cartridges, their shape and thickness or thinness, the grooves and their number give the Community design in question a certain aesthetic but also a more sophisticated appearance not dictated solely by their technical function.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0061"><NO.P>61.</NO.P><TXT>Moreover, if the <QUOT.START CODE="2018" ID="QS0105" REF.END="QE0105"/>objective observer<QUOT.END REF.START="QS0105" CODE="2019" ID="QE0105"/> criterion were to be accepted, this would raise a whole series of additional difficulties in defining this artificially created category and how it should be used, if only as regards the type and level of knowledge that such a person should possess.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0062"><NO.P>62.</NO.P><TXT>The <HT TYPE="ITALIC">second problem</HT> raised before the Court is <HT TYPE="ITALIC">identifying the elements which must be included in the examination</HT> to be conducted, in my view both objectively and on a case-by-case basis, by the court hearing a dispute based on Article 8(1) of Regulation No 6/2002.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0063"><NO.P>63.</NO.P><TXT>I concur with the majority view expressed in the observations submitted to the Court, according to which it is for the national court hearing the dispute to assess objectively and in the light of all the specific circumstances of each case whether different features of appearance of a product are based solely on considerations related to functionality.</TXT></NP.ECR><?PAGE NO="15"?><NP.ECR IDENTIFIER="NP0064"><NO.P>64.</NO.P><TXT>In this regard, according to the Commission, the national court should take account of assessment criteria accepted by the Court in the field of trade marks on the basis of which it can be presumed that the shape is not of purely technical value, such as <QUOT.START CODE="2018" ID="QS0106" REF.END="QE0106"/>the perception … by the average consumer[,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0076"><P>Even though this criterion would not be crucial in itself (see point 59 of this Opinion).</P></NOTE>] … the nature of the category of goods concerned, the artistic value of the shape in question, its dissimilarity from other shapes in common use on the market concerned, a substantial price difference in relation to similar products, and the development of a promotion strategy which focuses on accentuating the aesthetic characteristics of the product in question<QUOT.END REF.START="QS0106" CODE="2019" ID="QE0106"/>.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0077"><P>In this regard, the Commission refers to paragraphs 34 and 35 of the judgment of <REF.DOC.ECR><DATE ISO="20140918">18 September 2014</DATE>, <NAME.CASE><HT TYPE="ITALIC">Hauck</HT></NAME.CASE> (<NO.CASE>C‑205/13</NO.CASE>, <NO.ECLI ECLI="ECLI:EU:C:2014:2233">EU:C:2014:2233</NO.ECLI></REF.DOC.ECR>). See also footnote 71 to this Opinion.</P></NOTE> The Commission maintains that the court hearing the case should also take into consideration the existence of alternative forms which also fulfil the technical function concerned, as such existence would, as a rule, show that the designer had freedom in developing the features of appearance of the product and that the appearance was not dictated solely by functional contingencies.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0065"><NO.P>65.</NO.P><TXT>Similarly, DOCERAM also produces a non-exhaustive list of criteria which could be relevant, namely <QUOT.START CODE="2018" ID="QS0107" REF.END="QE0107"/>circumstances connected with the design process, advertising, use, etc.<QUOT.END REF.START="QS0107" CODE="2019" ID="QE0107"/> CeramTec asserts that the point of view of the <QUOT.START CODE="2018" ID="QS0108" REF.END="QE0108"/>informed user<QUOT.END REF.START="QS0108" CODE="2019" ID="QE0108"/>, which it proposes — wrongly in my view<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0078"><P>See point 57 et seq. of this Opinion.</P></NOTE> — be used as the objective assessment criterion, should be determined <QUOT.START CODE="2018" ID="QS0109" REF.END="QE0109"/>on the basis of an in-depth examination of all the circumstances of each case<QUOT.END REF.START="QS0109" CODE="2019" ID="QE0109"/>,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0079"><P>To that effect, CeramTec cites, inter alia, Ruhl, O., <HT TYPE="ITALIC">Gemeinschaftsgeschmacksmuster — Kommentar</HT>, op. cit. footnote 7, paragraph 10.</P></NOTE> in particular <QUOT.START CODE="2018" ID="QS0110" REF.END="QE0110"/>the specific objective of the manufacturer at the time of design, advertising of the product which focuses on accentuating the design, any distinction or particular reputation of the design among the relevant public and the designer’s intention on the creation of the product<QUOT.END REF.START="QS0110" CODE="2019" ID="QE0110"/>.<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0080"><P>The Greek and United Kingdom Governments did not make such lists of assessment criteria.</P></NOTE></TXT></NP.ECR><NP.ECR IDENTIFIER="NP0066"><NO.P>66.</NO.P><TXT>I would point out in this respect that the assessment in question must be conducted by the court hearing the case, in my view, not only having regard to the design concerned itself, but also in the light of all the circumstances surrounding the choice of its features of appearance, bearing in mind the evidence provided by the parties, regardless of the subject or the nature of that evidence,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0081"><P>Given that the burden of proving that the conditions inherent in Article 8(1) of Regulation No 6/2002 are met in a certain case logically rests on the party which is seeking to rely on the exception laid down in that provision.</P></NOTE> and bearing in mind any measures of inquiry ordered by that court.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0067"><NO.P>67.</NO.P><TXT>It is not impossible that criteria which, in my view, cannot in themselves show that features of appearance of a product have been dictated solely by its technical function within the meaning of Article 8(1) of Regulation No 6/2002, such as the subjective intention of the designer or the existence of alternative forms,<NOTE TYPE="FOOTNOTE" NUMBERING="ARAB" NUMBERING.CONTINUED="YES" NOTE.ID="E0082"><P>None of these criteria being decisive in itself, for the reasons set out in point 53 and point 23 et seq. of this Opinion respectively.</P></NOTE> may nevertheless be included in the body of specific evidence which courts must take into consideration in order to form their own opinion regarding the application of that provision.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0068"><NO.P>68.</NO.P><TXT>There is no need, in my view, to make a list of the relevant criteria, even a non-exhaustive one, given that the EU legislature did not envisage recourse to this method and that it would seem that the Court did not consider this appropriate in respect of the assessment, including of the facts, which must, moreover, be conducted pursuant to Articles 4 to 6 of the regulation.</TXT></NP.ECR><NP.ECR IDENTIFIER="NP0069"><NO.P>69.</NO.P><TXT>However, like the Greek Government, I think that it should be stressed that the court hearing the case will, if necessary, be able to conduct the required evaluation by seeking clarification from an independent expert appointed by it. I note in this regard that the national courts do not possess the sometimes highly technical competences necessary for that purpose and that they commonly order an expert report when faced with complex questions of this kind.</TXT></NP.ECR><?PAGE NO="16"?><NP.ECR IDENTIFIER="NP0070"><NO.P>70.</NO.P><TXT>Consequently, I consider that the second question should be answered to the effect that, in order to assess whether different features of appearance of a product are based solely on considerations of technical functionality for the purposes of the application of Article 8(1) of Regulation No 6/2002, it is for the court hearing the case to carry out an objective assessment, not from the — theoretical — point of view of an <QUOT.START CODE="2018" ID="QS0111" REF.END="QE0111"/>objective observer<QUOT.END REF.START="QS0111" CODE="2019" ID="QE0111"/>, but bearing in mind — in specific terms — all the relevant circumstances of each case.</TXT></NP.ECR></GR.SEQ></GR.SEQ><GR.SEQ LEVEL="1"><TITLE><TI><NP><NO.P><HT TYPE="BOLD">V.</HT></NO.P><TXT><HT TYPE="BOLD">Conclusion</HT></TXT></NP></TI></TITLE><NP.ECR IDENTIFIER="NP0071"><NO.P>71.</NO.P><TXT>In the light of the foregoing considerations, I propose that the Court answer the questions referred for a preliminary ruling by the Oberlandesgericht Düsseldorf (Higher Regional Court, Düsseldorf, Germany) as follows:</TXT><P><LIST TYPE="ARAB"><ITEM><NP><NO.P>(1)</NO.P><TXT>Article 8(1) of Council Regulation (EC) No 6/2002 of <DATE ISO="20011212">12 December 2001</DATE> on Community designs must be interpreted to the effect that the protection offered by the regulation is excluded where the features of appearance of the product in question were adopted exclusively in order to permit the product to fulfil a certain technical function, and thus without any creative contribution on the part of its designer, and the fact that there may exist other shapes which allow the same technical result to be obtained is not in itself crucial in this regard.</TXT></NP></ITEM><ITEM><NP><NO.P>(2)</NO.P><TXT>In order to determine whether the features of appearance of a product have been adopted on the basis of considerations related solely to the technical function of a product within the meaning of Article 8(1), the court hearing the case must give an objective ruling, exercising its own discretionary power and taking account of all the relevant circumstances of each case.</TXT></NP></ITEM></LIST></P></NP.ECR></GR.SEQ></CONTENTS.CONCLUSION></CONCLUSION>