1.

Au point 1.1.2., le dernier alinéa est supprimé.

2.

Au point 1.1.3., le premier alinéa est remplacé par le texte suivant:

«The application developed by each Member State reads delivery notifications from the inbox – on the basis of FORM R – and checks whether there is a corresponding delivery notification (FORM R) for every sent A, B, C, E, F, G or H form, which contained the “Document unifier”. The “Document unifier” is a unique context string – which identifies the mail – in the line beginning with the numbers “000”.».

3.

Au point 1.3., le quatrième alinéa est remplacé par le texte suivant:

«The “Subject” item of the message contains “file number” and a full stop (“.”) followed by the form-type identifier (Letter: “A”, “B”, “C”, “E”, “F”, “G”, “H” or “R”). For the respective forms, the “file number” equals the content of its heading: “001” in FORM “A”, “B”, “C”, “F”, “G”, “H” and the content of heading “048” in an FORM E. For heading definitions see 2.1.2.

Examples:

Subject: AUT0000010106AJKT00.B

Subject: FRA2007022457471104.E».

1.

Le point 2.1.1. est remplacé par le texte suivant:

«The general process flow of documents may be described shortly as follows. Detailed information can be found in 3.1 “LIST OF FUNCTIONALITIES”.

The following messages can be exchanged via the Schengen Consultation Network:

The receipt of any form A, B, C, F, G, E or H has to be acknowledged by replying with a form R, if the original message contained a ‘Document unifier’. The ‘Document unifier’ is labelled by ‘000’ on the form (the individual headings are documented below.). For the sake of clarity, the notification of the delivery is not stated explicitly in the following flow samples.»;

2.

Au point 2.1.1.1., les changements suivants sont introduits:

3.

Le point 2.1.1.2. est remplacé par le texte suivant:

«If and only if a State intends to represent another State or to be represented by another State, the consultation procedure shall meet the requirements referred to in Article 8 of the Visa Code and in the representation arrangements concerned, as described in the below sample process pictures (pictures 1 and 2).

Consultation when processing a visa application in the context of representation shall be subject to the following rules, in accordance with Article 22 of the Visa Code, and can be carried out in the framework of one or both of the following scenarios:

Picture 1 —   Norway representing Sweden

Norway’s central authorities are to ensure that necessary consultations of the other States take place. The absence of a reply within seven (7) days shall mean that the consulted State(s) has(have) no grounds for objecting to the issuing of the visa. If the represented State (Sweden) wants to be involved this has to be laid down in a bilateral representation arrangement between the States involved (Norway and Sweden). In that case, the represented State must always reply to the representing State's FORM F using a FORM G (obligation to reply). A visa cannot be issued if no reply indicating consent is received. The represented State may specify on the FORM G reply, that a Visa of Limited Territorial Validity (VLTV) should be issued in the framework of representation. In this case, all other Schengen States are duly notified (by means of a FORM C) of the VLTV's issued by the representing State. It is not necessary to state the territory to which the visa is limited.

Picture 2 —   Norway representing Sweden

Sweden’s central authorities are to ensure that necessary consultations of the other State(s) take place. The absence of a reply within seven (7) days shall mean that the consulted State(s) has(have) no grounds for objecting to the issuing of the visa. The represented State must always reply to the representing State's FORM F using a FORM G (obligation to reply). A visa cannot be issued if no reply indicating consent is received. The represented State may specify on the FORM G reply, that a Visa of Limited Territorial Validity (VLTV) should be issued in the framework of representation. In this case, all other Schengen States are duly notified (by means of a FORM C) of the VLTV's issued by the representing State. It is not necessary to state the territory to which the visa is limited. The consultation procedure (7 calendar days) and any further communication between the represented State and representing State in relation to the decision process (e.g. exchange of forms F and G) has to be done within 15 calendar days in accordance with Article 23(1) of the Visa Code.»;

4.

Au point 2.1.2., le premier alinéa est remplacé par le texte suivant:

«Each heading is identified by a number ranging from 001 to 999, followed by the separation sign “.”, the value of the heading and <CR><LF> (=Hexa: 0X0D resp. 0X0A) or <LF> (=Hexa:0X0A). The leading numbers refer to the headings in a form (A, B, C, F, G, H, E, R).»;

5.

Au point 2.1.4., les changements suivants sont introduits:

6.

Le point 2.1.5. est remplacé par le texte suivant:

«2.1.5.   FORM B: “REPLY TO CONSULTATION REQUEST”

Heading No. 000 & Heading No. 001:

See FORM A: “CONSULTATION REQUEST REGARDING VISA APPLICATION”.

Identifier of a reply to a consultation.

The heading’s structure is as follows:

Consultation can result in the following replies:

This is the date the consulted central authority formulates its reply.

Heading No. 099:

See FORM A: “CONSULTATION REQUEST REGARDING VISA APPLICATION”.»;

7.

Au Point 2.1.6., les changements suivants sont introduits:

8.

Au point 2.1.7, les changements suivants sont introduits:

9.

Le point 2.1.8 est remplacé par le texte suivant:

«2.1.8.   FORM G: “RESPONSE TO A VISA APPLICATION WITHIN THE FRAMEWORK OF REPRESENTATION”

In addition to the codes mentioned in heading 041. of

FORM B: “REPLY TO CONSULTATION REQUEST”

the following code is also allowed:

“5” approval for LTV

This optional space enables the represented State to transmit additional information to the representing State for the purpose of issuing the visa.

Other headings:

See FORM B: ‘REPLY TO CONSULTATION REQUEST”.»;

10.

Le point 2.1.9 est remplacé par le texte suivant:

«2.1.9   FORM E: “ERROR MESSAGE”

The purpose of this heading is to identify the error message:

This identifies the document the error refers to.

It contains one of the following headings of a referred form:

Possible indications:. “A”, “B”, “C”, “F”, “G” or “H”.

This heading indicates the error causing an E Form to be sent. The following codes can be used:

If error code 1 appears under heading No. 050, the number of the heading of the document which contains the first error must compulsorily be entered under heading No. 051.

If error code 2 appears under heading No. 050, the reason for the error shall be entered, according to the following codes:

The national applications shall be adapted in such a way that the statistics generated on Form E enable distinction of the number of error messages caused by technical errors (code = “1” under Heading No. 050) and logical errors (code = “2” under Heading No. 050).

Additional rule for form E:

It is prohibited to scan a form E itself for logical or technical failures and to reply to a malformed E by another form E to prevent a cumulative process – “Snowball Effect”.»;

11.

Au point 2.1.10. sous «Additional rules for form R», le deuxième point est remplacé par le texte suivant:

«If a Member State receives an alleged erroneous form R, it has to discard this form R without processing it. This means that the Member State should ignore forms R that seem to be invalid. Consequently an application which had to discard potentially malformed forms R will have remaining, unacknowledged forms A,....., H which will have to be resent until a valid form R arrives. If the problem persists it has to be solved bilaterally by technical staff.»;

12.

Après le point 2.1.10, le texte suivant est ajouté:

«2.1.11.   FORM H: “NOTIFICATION OF ISSUE OF A VISA”

13.

Le point 2.2.3. est remplacé par le texte suivant:

14.

Le point 2.2.4. est remplacé par le texte suivant:

1.

Le point 3.1. est remplacé par le texte suivant:

«3.1.   LIST OF FUNCTIONALITIES

For every form of type …:

The schemes below illustrate the position of the functions and the sequence of the different stages.

Send form types A, B, C, E, G, F or H:

2.

Au point 3.2.1., le titre est remplacé par le texte suivant:

«Preparing Form “A, B, C, E, G, F or H” »;

3.

Au point 3.2.2., le titre est remplacé par le texte suivant:

«Sending Form “A, B, C, E, G, F or H” via the Network»;

4.

Au point 3.2.3., le titre est remplacé par le texte suivant:

«Retrieving Form “A, B, C, E, G, F or H” »;

5.

Au point 3.2.4., les changements suivants sont introduits:

1.

Le point 4.2.1. est remplacé par le texte suivant:

2.

Le point 4.2.2. est remplacé par le texte suivant: