6.5.2008   

EN

Official Journal of the European Union

C 111/26


Commission communication in the framework of the implementation of the Directive 97/23/EC of the European Parliament and of the Council on the approximation of the laws of the Member States concerning pressure equipment

(Text with EEA relevance)

(Publication of titles and references of harmonised standards under the directive)

(2008/C 111/10)

The following list contains references to harmonised standards for pressure equipment and harmonised supporting standards for materials used in manufacturing pressure equipment. In the case of a harmonised supporting standard for materials, presumption of conformity to the essential safety requirements is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard shall be assessed against the design requirements of this specific item of equipment to verify that the essential safety requirements of the PED are satisfied.

ESO (1)

Reference and title of the harmonised standard

(and reference document)

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

(Note 1)

CEN

EN 19:2002

Industrial valves — Marking of metallic valves

 

CEN

EN 287-1:2004

Qualification test of welders — Fusion welding — Part 1: Steels

 

EN 287-1:2004/A2:2006

Note 3

Date expired

(30.9.2006)

EN 287-1:2004/AC:2004

 

 

CEN

EN 334:2005

Gas pressure regulators for inlet pressures up to 100 bar

 

CEN

EN 473:2000

Non destructive testing — Qualification and certification of NDT personnel — General principles

 

EN 473:2000/A1:2005

Note 3

Date expired

(30.4.2006)

CEN

EN 593:2004

Industrial valves — Metallic butterfly valves

 

CEN

EN 764-5:2002

Pressure Equipment — Part 5: Compliance and Inspection Documentation of Materials

 

CEN

EN 764-7:2002

Pressure equipment — Part 7: Safety systems for unfired pressure equipment

 

EN 764-7:2002/AC:2006

 

 

CEN

EN 1057:2006

Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications

 

CEN

EN 1092-1:2007

Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 1: Steel flanges

 

CEN

EN 1092-3:2003

Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 3: Copper alloy flanges

 

EN 1092-3:2003/AC:2004

 

 

EN 1092-3:2003/AC:2007

 

 

CEN

EN 1092-4:2002

Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN designated — Part 4: Aluminium alloy flanges

 

CEN

EN 1171:2002

Industrial valves — Cast iron gate valves

 

CEN

EN 1252-1:1998

Cryogenic vessels — Materials — Part 1: Toughness requirements for temperatures below – 80 °C

 

EN 1252-1:1998/AC:1998

 

 

CEN

EN 1252-2:2001

Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C

 

CEN

EN 1349:2000

Industrial process control valves

 

EN 1349:2000/AC:2001

 

 

CEN

EN 1591-1:2001

Flanges and their joints — Design rules for gasketed circular flange connections — Part 1: Calculation method

 

CEN

EN 1626:1999

Cryogenic vessels — Valves for cryogenic service

 

CEN

EN 1653:1997

Copper and copper alloys — Plate, sheet and circles for boilers, pressure vessels and hot water storage units

 

EN 1653:1997/A1:2000

 

 

CEN

EN 1759-3:2003

Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, Class designated — Part 3: Copper alloy flanges

 

EN 1759-3:2003/AC:2004

 

 

CEN

EN 1759-4:2003

Flanges and their joint — Circular flanges for pipes, valves, fittings and accessories, class designated — Part 4: Aluminium alloy flanges

 

CEN

EN 1797:2001

Cryogenic vessels — Gas/material compatibility

EN 1797-1:1998

Date expired

(31.1.2002)

CEN

EN 1866:2005

Mobile fire extinguishers

 

CEN

EN 1983:2006

Industrial valves — Steel ball valves

 

CEN

EN 1984:2000

Industrial valves — Steel gate valves

 

CEN

EN ISO 4126-1:2004

Safety devices for protection against excessive pressure — Part 1: Safety valves (ISO 4126-1:2004)

 

EN ISO 4126-1:2004/AC:2006

 

 

CEN

EN ISO 4126-3:2006

Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)

 

CEN

EN ISO 4126-4:2004

Safety devices for protection against excessive pressure — Part 4: Pilot operated safety valves (ISO 4126-4:2004)

 

CEN

EN ISO 4126-5:2004

Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004)

 

CEN

EN ISO 9606-2:2004

Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)

 

CEN

EN ISO 9606-3:1999

Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys (ISO 9606-3:1999)

 

CEN

EN ISO 9606-4:1999

Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys (ISO 9606-4:1999)

 

CEN

EN ISO 9606-5:2000

Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)

 

CEN

EN 10028-2:2003

Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels with specified elevated temperature properties

EN 10028-2:1992

Date expired

(31.12.2003)

EN 10028-2:2003/AC:2005

 

 

CEN

EN 10028-3:2003

Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels, normalized

EN 10028-3:1992

Date expired

(31.12.2003)

CEN

EN 10028-4:2003

Flat products made of steels for pressure purposes — Part 4: Nickel alloy steels with specified low temperature properties

EN 10028-4:1994

Date expired

(31.12.2003)

EN 10028-4:2003/AC:2005

 

 

CEN

EN 10028-5:2003

Flat products made of steels for pressure purposes — Part 5: Weldable fine grain steels, thermomechanically rolled

EN 10028-5:1996

Date expired

(31.12.2003)

CEN

EN 10028-6:2003

Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels, quenched and tempered

EN 10028-6:1996

Date expired

(31.12.2003)

CEN

EN 10204:2004

Metallic products — Types of inspection documents

 

CEN

EN 10213:2007

Steel castings for pressure purposes

EN 10213-1:1995

EN 10213-2:1995

EN 10213-3:1995

EN 10213-4:1995

31.5.2008

CEN

EN 10216-1:2002

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties

 

EN 10216-1:2002/A1:2004

 

 

CEN

EN 10216-2:2002 + A2:2007

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10216-2:2002

Date expired

(29.2.2008)

CEN

EN 10216-3:2002

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes

 

EN 10216-3:2002/A1:2004

 

 

CEN

EN 10216-4:2002

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

 

EN 10216-4:2002/A1:2004

 

 

CEN

EN 10216-5:2004

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 5: Stainless steel tubes

 

CEN

EN 10217-1:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties

 

EN 10217-1:2002/A1:2005

 

 

CEN

EN 10217-2:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

 

EN 10217-2:2002/A1:2005

 

 

CEN

EN 10217-3:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy fine grain steel tubes

 

EN 10217-3:2002/A1:2005

 

 

CEN

EN 10217-4:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

 

EN 10217-4:2002/A1:2005

 

 

CEN

EN 10217-5:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

 

EN 10217-5:2002/A1:2005

 

 

CEN

EN 10217-6:2002

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

 

EN 10217-6:2002/A1:2005

 

 

CEN

EN 10217-7:2005

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7: Stainless steel tubes

 

CEN

EN 10222-1:1998

Steel forgings for pressure purposes — Part 1: General requirements for open die forgings

 

EN 10222-1:1998/A1:2002

Note 3

Date expired

(31.10.2002)

CEN

EN 10222-2:1999

Steel forgings for pressure purposes — Part 2: Ferritic and martensitic steels with specified elevated temperature properties

 

EN 10222-2:1999/AC:2000

 

 

CEN

EN 10222-3:1998

Steel forgings for pressure purposes — Part 3: Nickel steels with specified low temperature properties

 

CEN

EN 10222-4:1998

Steel forgings for pressure purposes — Part 4: Weldable fine grain steels with high proof strength

 

EN 10222-4:1998/A1:2001

Note 3

Date expired

(31.1.2002)

CEN

EN 10222-5:1999

Steel forgings for pressure purposes — Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

 

EN 10222-5:1999/AC:2000

 

 

CEN

EN 10253-2:2007

Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements

 

CEN

EN 10253-4:2008

Butt-welding pipe fittings — Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

 

CEN

EN 10269:1999

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

 

EN 10269:1999/A1:2006

Note 3

Date expired

(31.10.2006)

EN 10269:1999/A1:2006/AC:2006

 

 

CEN

EN 10305-4:2003

Steel tubes for precision applications — Technical delivery conditions — Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

 

CEN

EN 10305-6:2005

Steel tubes for precision applications — Technical delivery conditions — Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

 

CEN

EN ISO 10931:2005

Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system (ISO 10931:2005)

 

CEN

EN 12178:2003

Refrigerating systems and heat pumps — Liquid level indicating devices — Requirements, testing and marking

 

CEN

EN 12263:1998

Refrigerating systems and heat pumps — Safety switching devices for limiting the pressure — Requirements and tests

 

CEN

EN 12266-1:2003

Industrial valves — Testing of valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements

 

CEN

EN 12284:2003

Refrigerating systems and heat pumps — Valves — Requirements, testing and marking

 

CEN

EN 12288:2003

Industrial valves — Copper alloy gate valves

 

CEN

EN 12334:2001

Industrial valves — Cast iron check valves

 

EN 12334:2001/A1:2004

Note 3

Date expired

(28.2.2005)

EN 12334:2001/AC:2002

 

 

CEN

EN 12392:2000

Aluminium and aluminium alloys — Wrought products — Special requirements for products intended for the production of pressure equipment

 

CEN

EN 12420:1999

Copper and copper alloys — Forgings

 

CEN

EN 12434:2000

Cryogenic vessels — Cryogenic flexible hoses

 

EN 12434:2000/AC:2001

 

 

CEN

EN 12451:1999

Copper and copper alloys — Seamless, round tubes for heat exchangers

 

CEN

EN 12452:1999

Copper and copper alloys — Rolled, finned, seamless tubes for heat exchangers

 

CEN

EN 12516-1:2005

Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells

 

EN 12516-1:2005/AC:2007

 

 

CEN

EN 12516-2:2004

Industrial valves — Shell design strength — Part 2: Calculation method for steel valve shells

 

CEN

EN 12516-3:2002

Valves — Shell design strength — Part 3: Experimental method

 

EN 12516-3:2002/AC:2003

 

 

CEN

EN 12516-4:2008

Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

 

CEN

EN 12542:2002

Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation above ground — Design and manufacture

 

EN 12542:2002/A1:2004

Note 3

Date expired

(31.5.2005)

CEN

EN 12735-1:2001

Copper and copper alloys — Seamless, round copper tubes for air conditioning and refrigeration — Part 1: Tubes for piping systems

 

EN 12735-1:2001/A1:2005

Note 3

Date expired

(31.10.2005)

CEN

EN 12735-2:2001

Copper and copper alloys — Seamless, round copper tubes for air conditioning and refrigeration — Part 2: Tubes for equipment

 

EN 12735-2:2001/A1:2005

Note 3

Date expired

(31.10.2005)

CEN

EN 12778:2002

Cookware — Pressure cookers for domestic use

 

CEN

EN 12952-1:2001

Water-tube boilers and auxiliary installations — Part 1: General

 

CEN

EN 12952-2:2001

Water-tube boilers and auxiliary installations — Part 2: Materials for pressure parts of boilers and accessories

 

CEN

EN 12952-3:2001

Water-tube boilers and auxilliary installations — Part 3: Design and calculation for pressure parts

 

CEN

EN 12952-5:2001

Water-tube boilers and auxiliary installations — Part 5: Workmanship and construction of pressure parts of the boiler

 

CEN

EN 12952-6:2002

Water-tube boilers and auxiliary installations — Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler

 

CEN

EN 12952-7:2002

Water-tube boilers and auxiliary installations — Part 7: Requirements for equipment for the boiler

 

CEN

EN 12952-8:2002

Water-tube boilers and auxiliary installations — Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler

 

CEN

EN 12952-9:2002

Water-tube boilers and auxiliary installations — Part 9: Requirements for firing systems for pulverized solid fuels for the boiler

 

CEN

EN 12952-10:2002

Water-tube boilers and auxiliary installations — Part 10: Requirements for safeguards against excessive pressure

 

CEN

EN 12952-11:2007

Water-tube boilers and auxiliary installations — Part 11: Requirements for limiting devices of the boiler and accessories

 

CEN

EN 12952-14:2004

Water-tube boilers and auxiliary installations — Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution

 

CEN

EN 12952-16:2002

Water-tube boilers and auxiliary installations — Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler

 

CEN

EN 12953-1:2002

Shell boilers — Part 1: General

 

CEN

EN 12953-2:2002

Shell boilers — Part 2: Materials for pressure parts of boilers and accessories

 

CEN

EN 12953-3:2002

Shell boilers — Part 3: Design and calculation for pressure parts

 

CEN

EN 12953-4:2002

Shell boilers — Part 4: Workmanship and construction of pressure parts of the boiler

 

CEN

EN 12953-5:2002

Shell boilers — Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler

 

CEN

EN 12953-6:2002

Shell boilers — Part 6: Requirements for equipment for the boiler

 

CEN

EN 12953-7:2002

Shell boilers — Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers

 

CEN

EN 12953-8:2001

Shell boilers — Part 8: Requirements for safeguards against excessive pressure

 

CEN

EN 12953-9:2007

Shell boilers — Part 9: Requirements for limiting devices of the boiler and accessories

 

CEN

EN 12953-12:2003

Shell boilers — Part 12: Requirements for grate firing systems for solid fuels for the boiler

 

CEN

EN 13121-1:2003

GRP tanks and vessels for use above ground — Part 1: Raw materials — Specification conditions and acceptance conditions

 

CEN

EN 13121-2:2003

GRP tanks and vessels for use above ground — Part 2: Composite materials — Chemical resistance

 

CEN

EN 13133:2000

Brazing — Brazer approval

 

CEN

EN 13134:2000

Brazing — Procedure approval

 

CEN

EN 13136:2001

Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation

 

EN 13136:2001/A1:2005

Note 3

Date expired

(31.12.2005)

CEN

EN 13175:2003 + A2:2007

LPG equipment and accessories — Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings

EN 13175:2003

Date expired

(30.9.2007)

CEN

EN 13348:2001

Copper and copper alloys — Seamless, round copper tubes for medical gases or vacuum

 

EN 13348:2001/A1:2005

Note 3

Date expired

(31.10.2005)

CEN

EN 13371:2001

Cryogenic vessels — Couplings for cryogenic service

 

CEN

EN 13397:2001

Industrial valves — Diaphragm valves made of metallic materials

 

CEN

EN 13445-1:2002

Unfired pressure vessels — Part 1: General

 

EN 13445-1:2002/A1:2007

Note 3

Date expired

(31.12.2007)

EN 13445-1:2002/A2:2006

Note 3

Date expired

(30.6.2007)

EN 13445-1:2002/A3:2007

Note 3

Date expired

(29.2.2008)

CEN

EN 13445-2:2002

Unfired pressure vessels — Part 2: Materials

 

EN 13445-2:2002/A1:2007

Note 3

Date expired

(31.12.2007)

EN 13445-2:2002/A2:2006

Note 3

Date expired

(30.6.2007)

CEN

EN 13445-3:2002

Unfired pressure vessels — Part 3: Design

 

EN 13445-3:2002/A1:2007

Note 3

Date expired

(31.12.2007)

EN 13445-3:2002/A2:2007

Note 3

Date expired

(31.10.2007)

EN 13445-3:2002/A3:2007

Note 3

Date expired

(31.10.2007)

EN 13445-3:2002/A4:2005

Note 3

Date expired

(31.1.2006)

EN 13445-3:2002/A5:2005

Note 3

Date expired

(15.8.2006)

EN 13445-3:2002/A6:2006

Note 3

Date expired

(31.8.2006)

EN 13445-3:2002/A8:2006

Note 3

Date expired

(31.10.2006)

EN 13445-3:2002/A10:2008

Note 3

30.9.2008

EN 13445-3:2002/A11:2006

Note 3

Date expired

(30.6.2007)

EN 13445-3:2002/A17:2007

Note 3

Date expired

(30.4.2007)

CEN

EN 13445-4:2002

Unfired pressure vessels — Part 4: Fabrication

 

EN 13445-4:2002/A2:2006

Note 3

Date expired

(30.6.2007)

CEN

EN 13445-5:2002

Unfired pressure vessels — Part 5: Inspection and testing

 

EN 13445-5:2002/A1:2007

Note 3

Date expired

(31.12.2007)

EN 13445-5:2002/A2:2005

Note 3

Date expired

(31.12.2005)

EN 13445-5:2002/A3:2006

Note 3

Date expired

(30.11.2006)

EN 13445-5:2002/A4:2006

Note 3

Date expired

(30.6.2007)

EN 13445-5:2002/A5:2006

Note 3

Date expired

(28.2.2007)

CEN

EN 13445-6:2002

Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

 

EN 13445-6:2002/A1:2004

Note 3

Date expired

(31.10.2004)

EN 13445-6:2002/A2:2006

Note 3

Date expired

(30.6.2007)

CEN

EN 13445-8:2006

Unfired pressure vessels — Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys

 

CEN

EN 13458-1:2002

Cryogenic vessels — Static vacuum insulated vessels — Part 1: Fundamental requirements

 

CEN

EN 13458-2:2002

Cryogenic vessels — Static vacuum insulated vessels — Part 2: Design, fabrication, inspection and testing

 

EN 13458-2:2002/AC:2006

 

 

CEN

EN 13458-3:2003

Cryogenic vessels — Static vacuum insulated vessels — Part 3: Operational requirements

 

EN 13458-3:2003/A1:2005

Note 3

Date expired

(31.12.2005)

CEN

EN 13480-1:2002

Metallic industrial piping — Part 1: General

 

EN 13480-1:2002/A1:2005

Note 3

Date expired

(31.12.2005)

CEN

EN 13480-2:2002

Metallic industrial piping — Part 2: Materials

 

CEN

EN 13480-3:2002

Metallic industrial piping — Part 3: Design and calculation

 

EN 13480-3:2002/A1:2005

Note 3

Date expired

(28.2.2006)

EN 13480-3:2002/A2:2006

Note 3

Date expired

(31.5.2007)

CEN

EN 13480-4:2002

Metallic industrial piping — Part 4: Fabrication and installation

 

CEN

EN 13480-5:2002

Metallic industrial piping — Part 5: Inspection and testing

 

CEN

EN 13480-6:2004

Metallic industrial piping — Part 6: Additional requirements for buried piping

 

EN 13480-6:2004/A1:2005

Note 3

Date expired

(30.6.2006)

CEN

EN 13480-8:2007

Metallic industrial piping — Part 8: Additional requirements for aluminium and aluminium alloy piping

 

CEN

EN 13611:2007

Safety and control devices for gas burners and gas burning appliances — General requirements

 

CEN

EN 13648-1:2002

Cryogenic vessels — Safety devices for protection against excessive pressure — Part 1: Safety valves for cryogenic service

 

CEN

EN 13648-2:2002

Cryogenic vessels — Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices for cryogenic service

 

CEN

EN 13648-3:2002

Cryogenic vessels — Safety devices for protection against excessive pressure — Part 3: Determination of required discharge — Capacity and sizing

 

CEN

EN 13709:2002

Industrial valves — Steel globe and globe stop and check valves

 

CEN

EN 13789:2002

Industrial valves — Cast iron globe valves

 

CEN

EN 13799:2002

Contents gauges for LPG tanks

 

EN 13799:2002/AC:2007

 

 

CEN

EN 13835:2002

Founding — Austenitic cast irons

 

EN 13835:2002/A1:2006

 

 

CEN

EN 13923:2005

Filament-wound FRP pressure vessels — Materials, design, manufacturing and testing

 

CEN

EN 14071:2004

Pressure relief valves for LPG tanks — Ancillary equipment

 

CEN

EN 14075:2002

Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 and for installation underground — Design and manufacture

 

EN 14075:2002/A1:2004

Note 3

Date expired

(30.6.2005)

CEN

EN 14129:2004

Pressure relief valves for LPG tanks

 

CEN

EN 14197-1:2003

Cryogenic vessels — Static non-vacuum insulated vessels — Part 1: Fundamental requirements

 

CEN

EN 14197-2:2003

Cryogenic vessels — Static non-vacuum insulated vessels — Part 2: Design, fabrication, inspection and testing

 

EN 14197-2:2003/A1:2006

Note 3

Date expired

(28.2.2007)

EN 14197-2:2003/AC:2006

 

 

CEN

EN 14197-3:2004

Cryogenic vessels — Static non-vacuum insulated vessels — Part 3: Operational requirements

 

EN 14197-3:2004/A1:2005

Note 3

Date expired

(31.12.2005)

EN 14197-3:2004/AC:2004

 

 

CEN

EN 14222:2003

Stainless steel shell boilers

 

CEN

EN 14276-1:2006

Pressure equipment for refrigerating systems and heat pumps — Part 1: Vessels — General requirements

 

CEN

EN 14341:2006

Industrial valves — Steel check valves

 

CEN

EN 14359:2006

Gas-loaded accumulators for fluid power applications

 

CEN

EN 14382:2005

Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar

 

CEN

EN 14570:2005

Equipping of LPG tanks, overground and underground

 

EN 14570:2005/A1:2006

Note 3

Date expired

(31.8.2006)

CEN

EN 14585-1:2006

Corrugated metal hose assemblies for pressure applications — Part 1: Requirements

 

CEN

EN ISO 15493:2003

Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series (ISO 15493:2003)

 

CEN

EN ISO 15494:2003

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE) and polypropylene (PP) — Specifications for components and the system — Metric series (ISO 15494:2003)

 

CEN

EN ISO 15613:2004

Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test (ISO 15613:2004)

 

CEN

EN ISO 15614-1:2004

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)

 

EN ISO 15614-1:2004/A1:2008

Note 3

31.8.2008

CEN

EN ISO 15614-2:2005

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)

 

CEN

EN ISO 15614-4:2005

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)

 

CEN

EN ISO 15614-5:2004

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)

 

CEN

EN ISO 15614-6:2006

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)

 

CEN

EN ISO 15614-7:2007

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding (ISO 15614-7:2007)

 

CEN

EN ISO 15614-8:2002

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)

 

CEN

EN ISO 15614-11:2002

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding (ISO 15614-11:2002)

 

CEN

EN ISO 15620:2000

Welding — Friction welding of metallic materials (ISO 15620:2000)

 

CEN

EN ISO 16135:2006

Industrial valves — Ball valves of thermoplastics materials (ISO 16135:2006)

 

CEN

EN ISO 16136:2006

Industrial valves — Butterfly valves of thermoplastics materials (ISO 16136:2006)

 

CEN

EN ISO 16137:2006

Industrial valves — Check valves of thermoplastics materials (ISO 16137:2006)

 

CEN

EN ISO 16138:2006

Industrial valves — Diaphragm valves of thermoplastics materials (ISO 16138:2006)

 

CEN

EN ISO 16139:2006

Industrial valves — Gate valves of thermoplastics materials (ISO 16139:2006)

 

CEN

EN ISO 21787:2006

Industrial valves — Globe valves of thermoplastics materials (ISO 21787:2006)

 

Note 1

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 3

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note:

Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and of the Council (2) amended by the Directive 98/48/EC (3).

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages.

This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list.

More information about harmonised standards on the Internet at:

http://ec.europa.eu/enterprise/newapproach/standardization/harmstds/


(1)  ESO: European Standardisation Organisation:

CEN: rue de Stassart 36, B-1050 Brussels, Tel. (32-2) 550 08 11; fax (32-2) 550 08 19 (http://www.cen.eu)

CENELEC: rue de Stassart 35, B-1050 Brussels, Tel. (32-2) 519 68 71; fax (32-2) 519 69 19 (http://www.cenelec.org)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. (33) 492 94 42 00; fax (33) 493 65 47 16 (http://www.etsi.org).

(2)  OJ L 204, 21.7.1998, p. 37.

(3)  OJ L 217, 5.8.1998, p. 18.