17.1.2015   

EN

Official Journal of the European Union

L 12/1


COMMISSION DELEGATED REGULATION (EU) 2015/35

of 10 October 2014

supplementing Directive 2009/138/EC of the European Parliament and of the Council on the taking-up and pursuit of the business of Insurance and Reinsurance (Solvency II)

(Text with EEA relevance)

TABLE OF CONTENTS

TITLE I

VALUATION AND RISK-BASED CAPTAL REQUIREMENTS (PILLAR I), ENHANCED GOVERNANCE (PILLAR II) AND INCREASED TRANPARENCY (PILLAR III) 20

CHAPTER I

General provisions 20

SECTION 1

Definitions and general principles 20

SECTION 2

External credit assessments 24

CHAPTER II

Valuation of assets and liabilities 25

CHAPTER III

Rules relating to technical provisions 29

SECTION 1

General provisions 29

SECTION 2

Data quality 31

SECTION 3

Methodologies to calculate technical provisions 32

SUBSECTION 1

Assumptions underlying the calculation of technical provisions 32

SUBSECTION 2

Information underlying the calculation of best estimates 34

SUBSECTION 3

Cash flow projections for the calculation of the best estimate 35

SUBSECTION 4

Risk margin 37

SUBSECTION 5

Calculation of technical provisions as a whole 39

SUBSECTION 6

Recoverables from reinsurance contracts and special purpose vehicles 39

SECTION 4

Relevant risk-free interest rate term structure 40

SUBSECTION 1

General provisions 40

SUBSECTION 2

Basic risk free interest rate term structure 41

SUBSECTION 3

Volatility adjustment 42

SUBSECTION 4

Matching adjustment 43

SECTION 5

Lines of business 44

SECTION 6

Proportionality and simplifications 45

CHAPTER IV

Own funds 47

SECTION 1

Determination of own funds 47

SUBSECTION 1

Supervisory approval of ancillary own funds 47

SUBSECTION 2

Own funds treatment of participations 49

SECTION 2

Classification of own funds 50

SECTION 3

Eligibility of own funds 58

SUBSECTION 1

Ring-fenced funds 58

SUBSECTION 2

Quantitative limits 59

CHAPTER V

Solvency capital requirement standard formula 59

SECTION 1

General provisions 59

SUBSECTION 1

Scenario based calculations 59

SUBSECTION 2

Look-through approach 60

SUBSECTION 3

Regional governments and local authorities 60

SUBSECTION 4

Material basis risk 60

SUBSECTION 5

Calculation of the basic solvency capital requirement 61

SUBSECTION 6

Proportionality and simplifications 61

SUBSECTION 7

Scope of the underwriting risk modules 72

SECTION 2

Non-life underwriting risk module 72

SECTION 3

Life underwriting risk module 87

SECTION 4

Health underwriting risk module 91

SECTION 5

Market risk module 104

SUBSECTION 1

Correlation coefficients 104

SUBSECTION 2

Interest rate risk sub-module 105

SUBSECTION 3

Equity risk sub-module 108

SUBSECTION 4

Property risk sub-module 111

SUBSECTION 5

Spread risk sub-module 111

SUBSECTION 6

Market risk concentrations sub-module 120

SUBSECTION 7

Currency risk sub-module 123

SECTION 6

Counterparty default risk module 124

SUBSECTION 1

General provisions 124

SUBSECTION 2

Type 1 exposures 131

SUBSECTION 3

Type 2 exposures 133

SECTION 7

Intangible asset module 134

SECTION 8

Operational risk 134

SECTION 9

Adjustment for the loss-absorbing capacity of technical provisions and deferred taxes 135

SECTION 10

Risk mitigation techniques 136

SECTION 11

Ring fenced funds 141

SECTION 12

Undertaking-specific parameters 142

SECTION 13

Procedure for updating correlation parameters 144

CHAPTER VI

Solvency capital requirement — full and partial internal models 144

SECTION 1

Definitions 144

SECTION 2

Use test 145

SECTION 3

Statistical quality standards 146

SECTION 4

Calibration standards 151

SECTION 5

Integration of partial internal models 151

SECTION 6

Profit and loss attribution 152

SECTION 7

Validation standards 152

SECTION 8

Documentation standards 153

SECTION 9

External models and data 155

CHAPTER VII

Minimum capital requirement 155

CHAPTER VIII

Investments in securitisation positions 159

CHAPTER IX

System of governance 162

SECTION 1

Elements of the system of governance 162

SECTION 2

Functions 168

SECTION 3

Fit and proper requirements 171

SECTION 4

Outsourcing 171

SECTION 5

Renumeration policy 173

CHAPTER X

Capital add-on 174

SECTION 1

Circumstances for imposing a capital add-on 174

SECTION 2

Methodologies for calculating capital add-ons 175

CHAPTER XI

Extension of the recovery period 178

CHAPTER XII

Public disclosure 179

SECTION 1

Solvency and financial condition report: structure and contents 179

SECTION 2

Solvency and financial condition report: non-disclosure of information 185

SECTION 3

Solvency and financial condition report: deadlines, means of disclosure and updates 186

CHAPTER XIII

Regular supervisory reporting 187

SECTION 1

Elements and contents 187

SECTION 2

Deadlines and means of communication 193

CHAPTER XIV

Transparency and accountability of supervisory authorities 194

CHAPTER XV

Special purpose vehicles 195

SECTION 1

Authorization 195

SECTION 2

Mandatory contract conditions 195

SECTION 3

System of governance 196

SECTION 4

Supervisory reporting 197

SECTION 5

Solvency requirements 197

TITLE II

INSURANCE GROUPS 199

CHAPTER I

Solvency calculation at group level 199

SECTION 1

Group solvency: choice of calculation method and general principles 199

SECTION 2

Group solvency: calculation methods 201

CHAPTER II

Internal models for the calculation of the consolidated group solvency capital requirement 206

SECTION 1

Full and partial internal models used to calculate only the group solvency capital requirement 206

SECTION 2

Use of a group internal model 208

CHAPTER III

Supervision of group solvency for groups with centralised risk management 210

CHAPTER IV

Coordination of group supervision 211

SECTION 1

Colleges of supervisors 211

SECTION 2

Exchange of information 213

SECTION 3

National or regional subgroup supervision 213

CHAPTER V

Public disclosure 214

SECTION 1

Group solvency and financial condition report 214

SECTION 2

Single solvency and financial condition report 216

CHAPTER VI

Group supervisory reporting 217

SECTION 1

Regular reporting 217

SECTION 2

Reporting on risk concentrations and intragroup transactions 219

TITLE III

THIRD COUNTRY EEQUIVALENCE AND FINAL PROVISIONS 220

CHAPTER I

Undertakings carrying out reinsurance activities with their head office in a third country 220

CHAPTER II

Related third country insurance and reinsurance undertakings 223

CHAPTER III

Insurance and reinsurance undertakings with the parent undertakings outside the union 224

CHAPTER IV

Final provisions 226

THE EUROPEAN COMMISSION

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2009/138/EC and in particular Article 31(4), Article 35(9), Article 37(6), Article 37(7), Article 50(1)(a), Article 50(1)(b), Article 50(2)(a), Article 50(2)(b), Article 50(3), Article 56, Article 75(2), Article 75(3), Article 86(1)(a) to (i), Article 86(2)(a), Article 86(2)(b), Article 92(1), Article 92(1a), Article 97(1), Article 97(2), Article 99(a), Article 99(b), Article 109a(5), Article 111(1)(a) to (f), Article 111(1)(g) to (q), Article 114(1)(a), Article 114(1)(b), Article 126, Article 127, Article 130, Article 135(2)(a), Article 135(2)(b), Article 135(2)(c), Article 135(3), Article 143(1), Article 172(1), Article 211(2), Article 216(7), Article 217(3), Article 227(3), Article 234, Article 241(a), Article 241(b), Article 241(c), Article 244(4), Article 244(5), Article 245(4), Article 245(5), Article 248(7), Article 248(8), Article 249(3), Article 256(4), Article 260(2) and Article 308b(13) thereof,

Whereas:

(1)

In applying the requirements set out in this Regulation, account should be taken to the nature, scale and complexity of the risks inherent in the business of an insurance or reinsurance undertaking. The burden and the complexity imposed on insurance undertakings should be proportionate to their risk profile. In applying the requirements set out in this Regulation, information should be considered as material if that information could influence the decision-making or judgement of the intended users of that information.

(2)

In order to reduce overreliance on external ratings, insurance and reinsurance undertakings should aim at having their own credit assessment on all their exposures. However, in view of the proportionality principle, insurance and reinsurance undertakings should only be required to have own credit assessments on their larger or more complex exposures.

(3)

Supervisory authorities should ensure that insurance and reinsurance undertakings take appropriate steps to develop internal models that cover credit risk where their exposures are material in absolute terms and where they have at the same time a large number of material counterparties. For this purpose, supervisory authorities should have a harmonised approach to the definitions of exposures that are material in absolute terms and large number of material counterparties.

(4)

In order to avoid the risk of biased estimations of the credit risk by insurance and reinsurance undertakings that do not use an approved internal model to calculate the credit risk in their Solvency Capital Requirement, their own credit assessments should not result in lower capital requirements than the ones derived from external ratings.

(5)

In order to avoid overreliance on ratings when the exposures are to another insurance or reinsurance undertaking, the use of ratings for the purposes of calculating the capital requirement in accordance with the standard formula could be replaced by a reference to the solvency position of the counterparty (solvency ratio approach). Such an approach would necessitate a calibration based on Solvency Capital Requirements and eligible amounts of own funds to cover these Solvency Capital Requirements as determined when Solvency II is in place. The solvency ratio approach should be limited to insurance and reinsurance undertakings that are not rated.

(6)

In order to ensure that valuation standards for supervisory purposes are compatible with international accounting developments, insurance and reinsurance undertakings should use market consistent valuation methods prescribed in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002, unless the undertaking is required to use a specific valuation method in relation to an asset or liability or is permitted to use methods based on the valuation method it uses for preparing its financial statements.

(7)

Insurance and reinsurance undertakings' valuation of the assets and liabilities using the market consistent valuation methods prescribed in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002, should follow a valuation hierarchy with quoted market prices in active markets for the same assets or liabilities being the default valuation method in order to ensure that assets and liabilities are valued at the amount for which they could be exchanged in the case of assets or transferred or settled in the case of liabilities between knowledgeable and willing parties in an arm's length transaction. This approach should be applied by undertakings regardless of whether international or other valuation methods follow a different valuation hierarchy.

(8)

Insurance and reinsurance undertakings should recognise and value deferred tax assets and liabilities in relation to all items that are recognised for solvency purposes or in the tax balance sheet in order to ensure that all amounts which could give rise to future tax cash flows are captured.

(9)

The valuation of insurance and reinsurance obligations should include obligations relating to existing insurance and reinsurance business. Obligations relating to future business should not be included in the valuation. Where insurance and reinsurance contracts include policyholder options to establish, renew, extend, increase or resume the insurance or reinsurance cover or undertaking options to terminate the contract or amend premiums or benefits, a contract boundary should be defined to specify whether the additional cover arising from those options is regarded as existing or future business.

(10)

In order to determine the transfer value of insurance and reinsurance obligations, the valuation of the obligations should take into account future cash flows relating to contract renewal options, regardless of their profitability, unless the renewal option means that the insurance or reinsurance undertaking would from an economic perspective have the same rights over the setting of the premiums or benefits of the renewed contract as those which exist for a new contract.

(11)

In order to ensure that the analysis of the financial position of the insurance or reinsurance undertaking is not distorted, the technical provisions of a portfolio of insurance and reinsurance obligations may be negative. The calculation of technical provisions should not be subject to a floor of zero.

(12)

The transfer value of an insurance or reinsurance obligation may be lower than the surrender values of the underlying contracts. The calculation of technical provisions should not be subject to surrender value floors.

(13)

In order to arrive at technical provisions that correspond to the transfer value of insurance and reinsurance obligations the calculation of the best estimate should take account of future developments, such as demographic, legal, medical, technological, social, environmental and economic developments, that will impact the cash in- and out-flows required to settle the obligations.

(14)

In order to arrive at a best estimate that corresponds to the probability-weighted average of future cash flows as referred to in Article 77(2) of Directive 2009/138/EC, the cash flows projection used in the calculation of the best estimate should take account of all uncertainties in the cash flows.

(15)

The choice of the method to calculate the best estimate should be proportionate to the nature, scale and complexity of the risks supported by the insurance or reinsurance undertaking. The range of methods to calculate the best estimate includes simulation, deterministic and analytical techniques. For certain life insurance contracts, in particular where they give rise to discretionary benefits depending on investment returns or where they include financial guarantees and contractual options, simulation methods may lead to a more appropriate calculation of the best estimate.

(16)

Where insurance and reinsurance contracts include financial guarantees and options, the present value of cash flows arising from those contracts may depend both on the expected outcome of future events and developments and on how the actual outcome in certain scenarios could deviate from the expected outcome. The methods used to calculate the best estimate should take such dependencies into account.

(17)

The definition of future discretionary benefits should capture the benefits of insurance and reinsurance contracts that are paid in addition to guaranteed benefits and that result from profit participation by the policy holder. It should not capture index-linked or unit-linked benefits.

(18)

The calculation of the risk margin should be based on the assumption that the whole portfolio of insurance and reinsurance obligations is transferred to another insurance or reinsurance undertaking. In particular, the calculation should take the diversification of the whole portfolio into account.

(19)

The calculation of the risk margin should be based on a projection of the Solvency Capital Requirement that takes the risk mitigation of reinsurance contracts and special purpose vehicles into account. Separate calculations of the risk margin gross and net of reinsurance contracts and special purpose vehicles should not be stipulated.

(20)

The adjustment for credit risk to the basic risk-free interest rates should be derived from market rates that capture the credit risk reflected in the floating rate of interest rate swaps. For this purpose, in order to align the determination of the adjustment with standard market practice and under market conditions similar to those at the date of adoption of Directive 2014/51/EU, in particular for the euro, the market rates should correspond to interbank offered rates for a 3 month maturity.

(21)

Under market conditions similar to those at the date of adoption of Directive 2014/51/EU, when determining the last maturity for which markets for bonds are not deep, liquid and transparent anymore in accordance with Article 77a of Directive 2009/138/EC, the market for bonds denominated in euro should not be regarded as deep and liquid where the cumulative volume of bonds with maturities larger than or equal to the last maturity is less than 6 percent of the volume of all bonds in that market.

(22)

Where no reliable credit spread can be derived from the default statistics, as in the case of exposures to sovereign debt, the fundamental spread for the calculation of the matching adjustment and the volatility adjustment should be equal to the portion of the long term average of the spread over the risk free interest rate set out in Article 77c(2)(b) and (c) of Directive 2009/138/EC. As regards exposures to Member States' central government and central banks, the asset class should capture the difference between individual Member States.

(23)

In order to ensure transparency in the determination of the relevant risk free interest rate, in accordance with recital 29 of Directive 2014/51/EU, the methodology, assumptions and identification of the data used by the European Insurance and Occupational Pensions Authority (EIOPA) to calculate the adjustment to swap rates for credit risk, the volatility adjustment and the fundamental spread for the matching adjustment, should be published by EIOPA as part of the technical information to be published by virtue of Article 77e(1) of Directive 2009/138/EC.

(24)

The segmentation of insurance and reinsurance obligations into lines of business and homogeneous risk groups should reflect the nature of the risks underlying the obligation. The nature of the underlying risks may justify segmentation which differs from the allocation of insurance activities to life insurance activities and non-life insurance activities, from the classes of non-life insurance set out in Annex I of Directive 2009/138/EC and from the classes of life insurance set out in Annex II of Directive 2009/138/EC.

(25)

The determination whether a method of calculating technical provisions is proportionate to the nature, scale and complexity of the risks should include an assessment of the model error of the method. But this assessment should not require insurance and reinsurance undertakings to specify the precise amount of the model error.

(26)

For the purposes of the application for supervisory approval to use the matching adjustment referred to in paragraph 1 of Article 77b of Directive 2009/138/EC, undertakings should be permitted to consider different eligible insurance products as one portfolio, provided that the conditions for approval are met on a continuous basis and there are no legal impediments to the business being organised and managed separately from the rest of the business of the undertaking in one portfolio.

(27)

The approval of ancillary own funds to be included to meet an insurance or reinsurance undertaking's Solvency Capital Requirement should be based on an assessment of the relevant criteria by the supervisory authorities. However, the insurance or reinsurance undertaking seeking approval for an ancillary own fund item should demonstrate to the supervisory authorities that the criteria have been met and provide to the supervisory authorities all the information that the supervisory authorities may require in order to make such an assessment. The assessment of the application for approval of ancillary own funds by the supervisory authorities should be undertaken on a case-by-case basis.

(28)

When considering an application for approval of ancillary own funds in accordance with Article 90 of Directive 2009/138/EC the supervisory authorities should consider the economic substance and the legal enforceability of the ancillary own funds item for which approval is being sought.

(29)

Tier 1 own funds should be made up of own-fund items which are of a high quality and which fully absorb losses to enable an insurance or reinsurance undertaking to continue as a going concern.

(30)

Where the economic effect of a transaction, or a group of connected transactions, is equivalent to the holding by an insurance or reinsurance undertaking of its own shares, the excess of assets over liabilities should be reduced to reflect the existence of an encumbrance on that part of own-funds.

(31)

The assessment of whether an individual own-fund item is of sufficient duration should be based on the original maturity of that item. The average duration of an insurance or reinsurance undertaking's total own funds, taking into account the remaining maturity of all own-fund items, should not be significantly lower than the average duration of insurance or reinsurance undertaking's liabilities. Insurance and reinsurance undertakings should also assess whether the total amount of own funds is of a sufficient duration as part of their own risk and solvency assessment, taking into account both the original and remaining maturity of all own-fund items and of all insurance and reinsurance liabilities.

(32)

The assessment of loss-absorbency in a winding-up in accordance with Article 93 of Directive 2009/138/EC should not be based on a comparison of the excess of assets over liabilities valued on a going-concern basis against the excess of assets over liabilities valued under the assumption that winding-up proceedings have been opened in relation to the insurance or reinsurance undertaking.

(33)

Since the future premiums receivable on existing insurance and reinsurance contracts are included in the calculation of the technical provisions, the amount of the excess of assets over liabilities that is included in Tier 1 should not be adjusted to exclude the expected profits on those future premiums.

(34)

Own-fund items with features that incentivise redemption, such as contractual increases in the dividend payable or increases in the coupon rate combined with a call option, should be limited to allow for restrictions on repayment or redemption in the event of a breach of the Solvency Capital Requirement and should only be classified as Tier 2 or Tier 3.

(35)

Insurance and reinsurance undertakings should divide the excess of assets over liabilities into amounts that correspond to capital items in their financial statements and a reconciliation reserve. The reconciliation reserve may be positive or negative.

(36)

The complete list of own-fund items should be set out for each tier, including Tier 3, so that it is clear for which items insurance and reinsurance undertakings should seek supervisory approval for classification.

(37)

Ring-fenced funds are arrangements where an identified set of assets and liabilities are managed as though they were a separate undertaking, and should not include conventional index-linked, unit-linked or reinsurance business. The reduced transferability of the assets of a ring-fenced fund should be reflected in the calculation of the excess of assets over the liabilities of the insurance or reinsurance undertaking.

(38)

Both life and non-life insurance and reinsurance activities can give rise to ring-fenced funds. Profit participation does not necessarily imply ring-fencing, and should not be taken as the defining characteristic of a ring-fenced fund.

(39)

Ring-fenced funds should be limited to those arrangements that reduce the capacity of certain own fund items to absorb losses on a going concern basis. Arrangements that only affect loss absorbency in the case of winding-up should not be considered as ring-fenced funds.

(40)

In order to avoid double counting of own-funds between the insurance and banking sectors at individual level, insurance and reinsurance undertakings should deduct from the amount of basic own funds any participations in financial and credit institutions in excess of 10 % of the Tier 1 own-fund items which are not subject to any limit. Participations in financial and credit institutions that in aggregate exceed the same threshold should be partially deducted on a proportional basis. The deduction is not necessary where the participations are strategic and method 1 set out in Annex I to Directive 2002/87/EC is applied to these undertakings for the group solvency calculation.

(41)

The majority of the eligible amount of own funds to cover the Minimum Capital Requirement and Solvency Capital Requirement should be composed of Tier 1 own funds. In order to ensure that the application of the limits does not create potential pro-cyclical effects, the limits on the eligible amounts of Tier 2 and Tier 3 items should apply in such a way that a loss in Tier 1 own funds does not result in a loss of total eligible own funds that is higher than that loss. Therefore, the limits should apply to the extent that the Solvency Capital Requirement and Minimum Capital Requirement are covered with own funds. Own-fund items in excess of the limits should not be counted as eligible own funds.

(42)

When setting up lists of regional governments and local authorities, EIOPA should respect the requirement that there is no difference in risk between exposures to these and exposures to the central government in whose jurisdiction they are established because of the specific revenue raising powers of the former and that specific institutional arrangements exist, the effect of which is to reduce the risk of default. The effect of the implementing act adopted pursuant to Article 109a(2)(a) of Directive 2009/138/EC relating to these lists is that direct exposures to the regional governments and local authorities listed are treated as exposures to the central government of the jurisdiction in which they are established for the purposes of the calculation of the market risk module and the counterparty default risk module of the standard formula.

(43)

In order to avoid giving the wrong incentives to restructure long-term contracts as short-term renewable contracts, the volume measure for non-life and SLT health premium risk used in the standard formula should be based on the economic substance of insurance and reinsurance contracts rather than on their legal form. The volume measure should, therefore, capture earned premiums that are within the contract boundary of existing contracts and on contracts that will be written in the next 12 months.

(44)

As the expected profits included in future premiums of existing non-life insurance and reinsurance contracts are recognised in the eligible own funds of insurance and reinsurance undertakings, the non-life underwriting risk module should capture the lapse risk relating to non-life insurance and reinsurance contracts.

(45)

In relation to premium risk, the calculation of the capital requirement for non-life and health premium and reserve risk should be based on the larger of the past and the expected future earned premiums to take account of the uncertainty around the future earned premiums. However, where an insurance or reinsurance undertaking can reliably ensure that the future earned premiums will not exceed the expected premiums, the calculation should be based on the expected earned premiums only.

(46)

In order to reflect the average characteristics of life insurance obligations, the modelling of mass lapse risk in the Solvency Capital Requirement standard formula should be based on the assumption that the risk relating to the options that a ceding insurance or reinsurance undertaking of a reinsurance contract may exercise is not material for the accepting insurance or reinsurance undertaking.

(47)

In order to reflect the different risk profile of health insurance that is pursued on a similar technical basis to that of life insurance (SLT health) and other health insurance business (NSLT health), the health underwriting risk module should include different sub-modules for these two types of insurance.

(48)

In order to reflect the average characteristics of life insurance obligations, the modelling of the life and SLT health underwriting risk modules should be based on the assumption that the risk relating to the dependence of insurance and reinsurance benefits on inflation is not material

(49)

The scenario-based calculations of the non-life and health catastrophe risk sub-modules of the standard formula should be based on the specification of catastrophe losses that are gross, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles. Insurance and reinsurance undertakings should allow for the risk-mitigating effect of their specific reinsurance contracts and special purpose vehicles when they determine the change in basic own funds resulting from the scenario.

(50)

In order to reflect the average characteristics of non-life insurance obligations, the modelling of the liability risk in the non-life catastrophe risk sub-module of the standard formula should be based on the assumption that the risk of an accumulation of a large number of similar claims which are covered by third party liability insurance obligations is not material.

(51)

In order to reflect the average characteristics of non-life insurance obligations, the modelling of mass accident risk in the standard formula should be based on the assumption that the exposure of insurance and reinsurance undertakings to mass accident risk situated in third countries, other than specific European countries, is not material for the insurance and reinsurance undertakings and insurance groups subject to Directive 2009/138/EC. It should also be based on the assumption that the mass accident risk in relation to workers' compensation insurance is not material

(52)

In order to reflect the average characteristics of non-life insurance obligations, the modelling of accident concentration risk in the standard formula should be based on the assumption that the accident concentration risk in relation to medical expense insurance and income protection insurance other than group contracts is not material.

(53)

In order to reflect empirical evidence on natural catastrophes in the calibration of the standard formula, the modelling of natural catastrophe risk should be based on geographical divisions that are sufficiently homogeneous in relation to the risk that insurance and reinsurance undertakings are exposed to. The risk weights for those divisions should be specified in such a way that they capture the ratio of annual loss and sum insured for the relevant lines of business using a Value-at-Risk measure with a 99,5 % confidence level. The correlation coefficients between those geographical divisions should be selected in such a way that they reflect the dependency between the relevant risks in the geographical divisions, taking into account any non-linearity of the dependence.

(54)

In order to capture the actual risk exposure of the undertaking in the calculation of the capital requirement for natural catastrophe risk in the standard formula, the sum insured should be determined in a manner that takes account of contractual limits for the compensation for catastrophe events.

(55)

The market risk module of the standard formula should be based on the assumption that the sensitivity of assets and liabilities to changes in the volatility of market parameters is not material.

(56)

The calibration of the interest rate risk at longer maturities should reflect that the ultimate forward rate towards which the risk-free interest rate term structure converges to is stable over time and only changes because of changes in long-term expectations.

(57)

For the purposes of the calculation of the standard formula, insurance and reinsurance undertakings should identify which of their related undertakings are of a strategic nature. The calibration of the equity risk sub-module on the investments in related undertakings which are of strategic nature should reflect the likely reduction in the volatility of their value arising from their strategic nature and the influence exercised by the participating undertaking on those related undertakings.

(58)

The duration-based equity risk sub-module should be based on the assumption that the typical holding period of equity investments referred to in Article 304 of Directive 2009/138/EC is consistent with the average duration of liabilities pursuant to Article 304 of Directive 2009/138/EC.

(59)

In order to avoid the effects of pro-cyclicality, the time period for the symmetric adjustment mechanism to the equity risk sub-module should strike a balance between maintaining risk-sensitivity of the sub-module and reflecting the objective of the symmetric adjustment.

(60)

When a matching adjustment is applied in the calculation of the best estimate of insurance or reinsurance obligations, the calculation of the Solvency Capital Requirement in the spread risk sub-module should capture the impact of changes in asset spreads on the matching adjustment and thus on the value of technical provisions.

(61)

Considering that the risk-profile of property located in third countries is not materially different from that of property located in the Union, the property risk sub-module of the standard formula should treat these two types of exposures in the same way.

(62)

Given that concentration risk is mostly driven by the lack of diversification in issuers to which insurance or reinsurance undertakings are exposed, the market risk concentrations sub-module of the standard formula should be based on the assumption that the geographical or sector concentration of the assets held by the insurance or reinsurance undertaking is not material.

(63)

The counterparty default risk module of the standard formula should be based on the assumption that, for exposures that may be diversified and where the counterparty is likely to be rated (type 1 exposures), losses-given-default on counterparties which do not belong to the same group are independent and losses-given-default on counterparties which do belong to the same group are not independent.

(64)

In order to ensure that the credit risk on all counterparties to which insurance or reinsurance undertakings are exposed is captured in the Solvency Capital Requirement calculated with the standard formula, all exposures which are neither captured in the spread risk sub-module nor in the counterparty default risk module as type 1 exposures should be captured in the counterparty default risk module as type 2 exposures.

(65)

The counterparty default risk module of the standard formula should reflect the economic effect of collateral arrangements in case of default of the counterparty. In particular, it should be considered whether the full ownership of the collateral is transferred or not. It should also be considered whether in case of insolvency of the counterparty, the determination of the insurance or reinsurance undertaking's proportional share of the counterparty's insolvency estate in excess of the collateral takes into account that the undertaking receives the collateral.

(66)

Consistent with the approach set out in Article 104(1), (3) and (4) of Directive 2009/138/EC, the Basic Solvency Capital Requirement should include an additional risk module in order to address the specific risks arising from intangible assets, as recognised and valued for solvency purpose, that are not captured elsewhere in the Solvency Capital Requirement.

(67)

The operational risk module of the standard formula captures the risk arising from inadequate or failed internal processes, personnel or systems, or from external events in a factor-based calculation. For this purpose, technical provisions, premiums earned during the previous twelve months, and expenses incurred during the previous twelve months are considered appropriate volume measures to capture this risk. The latter volume measure is relevant only for life insurance contracts where the risk is borne by the policyholder. In view of the fact that acquisition expenses are implemented heterogeneously in different insurance business models, these expenses should not be taken into account in the volume measure for the amount of expenses incurred during the previous 12 months. In order to ensure that the capital requirement for operational risk continues to meet the confidence level set out in Article 101 of Directive 2009/138/EC, the operational risk module should be re-examined as part of the Commission review of the methods, assumptions and standard parameters used when calculating the Solvency Capital Requirement with the standard formula, as referred to in recital (150). This review should in particular target life insurance contracts where the risk is borne by the policyholder.

(68)

The calculation of the adjustment for the loss-absorbing capacity of technical provisions and deferred taxes should ensure that there is no double counting of the risk mitigating effect provided by future discretionary benefits or deferred taxes.

(69)

Future discretionary benefits are usually a feature associated with life and SLT health insurance contracts. Therefore, the adjustment for the loss-absorbing capacity of technical provisions should take into account the mitigating effect provided by future discretionary benefits in relation to life underwriting risk, SLT health underwriting risk, health catastrophe risk, market risk and counterparty default risk. In order to limit the complexity of the standard formula and the calculation burden for insurance and reinsurance undertakings the adjustment should not apply to the risks of non-life insurance and NSLT health insurance. As losses arising from inadequate or failed internal processes, personnel or systems, or from external events might not be effectively absorbed by future discretionary benefits, the adjustment should not apply to operational risk.

(70)

The recognition of risk-mitigation techniques in the calculation of the Solvency Capital Requirement should reflect the economic substance of the technique used and should be restricted to risk-mitigation techniques that effectively transfer the risk outside the insurance or reinsurance undertaking.

(71)

The assessment of whether there has been an effective transfer of risk should consider all aspects of the risk-mitigation technique and the arrangements between the insurance and reinsurance undertaking and their counterparties. In the case of risk-mitigation provided by reinsurance, the fact that the probability of a significant variation in either the amount or timing of payments by the reinsurer is remote should not, of itself, mean that the reinsurer has not assumed risk.

(72)

The scenario-based calculations of the Solvency Capital Requirement standard formula are based on the impact of instantaneous stresses and insurance and reinsurance undertakings should not take into account risk-mitigation techniques that rely on insurance or reinsurance undertakings taking future action, such as dynamic hedging strategies or future management actions, at the time that the stress occurs. Dynamic hedging strategies and future management actions should be distinguished from rolling hedge arrangements, where a risk-mitigation technique is currently in force and will be replaced at the time of its expiry with a similar arrangement regardless of the solvency position of the undertaking.

(73)

In order to avoid the situation whereby the effectiveness of a risk mitigation technique is undermined by the existence of basis risk, in particular because of a currency mismatch, undertakings should reflect material basis risk in the calculation of the Solvency Capital Requirement. Where material basis risk is not reflected in the calculation of the Solvency Capital Requirement, the risk mitigation technique should not be recognised.

(74)

The existence of profit participation arrangements, whereby profits are allocated to policy holders or beneficiaries should be appropriately reflected in the calculation of the Solvency Capital Requirement.

(75)

Where the calculation of the capital requirement for a risk module or sub-module of the Basic Solvency Capital Requirement is based on the impact of bidirectional scenarios on basic own funds, as in interest rate risk, currency risk or lapse risk, the insurance or reinsurance undertaking should determine which scenario most negatively affects the basic own funds of the insurance or reinsurance undertaking as a whole. This determination should, where relevant, take into account the effects of profit participation and the distribution of future discretionary benefits at the level of the ring-fenced fund. The scenario determined in this way should be the relevant scenario to calculate the notional Solvency Capital Requirement for each ring-fenced fund.

(76)

In order to be able to prepare for future revisions of correlation parameters on the basis of suitable empirical information, such as changes in mortality rates and lapse rates for life obligations and combined ratios or provision run-off ratios for non-life insurance obligations, EIOPA should receive appropriate data from supervisory authorities. Supervisory authorities should receive this data from insurance and reinsurance undertakings as part of the information which is to be reported to supervisors given that it will be necessary for the purposes of supervision and should not therefore result in additional burdens for undertakings.

(77)

When providing an opinion on an update to correlation parameters, EIOPA should take into account whether the application of the updated correlation parameters by insurance and reinsurance undertakings would result in an overall Solvency Capital Requirement which complies with the principles in Article 101 of Directive 2009/138/EC, and whether dependencies between risks are non-linear or whether there is a lack of diversification under extreme scenarios, in which case EIOPA should consider alternative measures of dependence for the purposes of calibrating updates to the correlation parameters.

(78)

It is likely that many aspects of internal models will change over time as knowledge about risk modelling improves, and supervisory authorities should accordingly have regard to current information and practice in making their assessment of the internal model to ensure that it keeps pace with recent developments.

(79)

An internal model can only play an important role in the system of governance of an insurance or reinsurance undertaking where it is adapted to the business of the undertaking and understood by the persons who base decisions on its outputs. The use test for internal models should therefore ensure that approved internal models are appropriate to the business of the undertaking and are understood by the persons who effectively run the undertaking.

(80)

Insurance and reinsurance undertakings calculating the Solvency Capital Requirement on the basis of an internal model should use the internal model in their risk-management system and in their decision-making processes in a way that creates incentives to improve the quality of the internal model itself.

(81)

The requirement that the internal model is widely used in and plays an important role in their system of governance set out in Article 120 of Directive 2009/138/EC should not lead insurance and reinsurance undertakings to rely blindly on the output of the internal model. The undertakings should not make decisions based on the output of the internal model without challenging the appropriateness of the model. They should be aware of the limitations of the internal model and take them into account in their decisions.

(82)

As no particular method for the calculation of the probability distribution forecast for internal models is prescribed in accordance with Article 121(4) of Directive 2009/138/EC and as internal models should be adapted to the specific business of the insurance and reinsurance undertaking, internal models may vary significantly in their methodology, the information, assumptions and data used for the internal model and in their validation processes. The statistical quality standards and the validation standards should therefore remain principle-based and include only specific minimum requirements. For the same reason, the documentation standards should not include a complete list of documents, but only a minimum list of documents that should exist for each internal model. Undertakings' documentation should contain any additional information that is necessary to comply with the documentation standards for internal models.

(83)

In order to ensure that the internal model is up to date and reflects their risk profile in the best possible manner, insurance and reinsurance undertakings should be aware of the relevant actuarial developments and the generally accepted market practice of risk modelling. However, this does not imply that insurance and reinsurance undertakings should always adapt their internal model to the generally accepted market practices. In many cases it might be necessary to depart from the generally accepted market practice in order to arrive at an appropriate internal model.

(84)

Internal models are likely to be based on a large amount of data stemming from a variety of sources and of differing characteristics and quality. In order to ensure the appropriateness of the data used for the internal model, insurance and reinsurance undertakings should collect, process and apply data in a transparent and structured manner.

(85)

Insurance and reinsurance undertakings should be free to decide the structure of the internal model that most appropriately reflects their risks. This should be done subject to approval by the supervisory authorities. In the case of partial internal models it might be more appropriate to calculate different components separately and integrate them directly into the standard formula without further aggregation in the internal model. In this case a probability distribution forecast should be calculated for each component.

(86)

Any integration technique of a partial internal model into the standard formula to calculate the Solvency Capital Requirement is part of that internal model and should, together with the other components of the partial internal model, fulfil the relevant requirements of Directive 2009/138/EC.

(87)

Insurance and reinsurance undertakings should calculate the linear Minimum Capital Requirement using a standard calculation regardless of whether the undertaking uses the standard formula or an internal model to calculate its Solvency Capital Requirement.

(88)

For the purposes of calculating the cap and the floor of the Minimum Capital Requirement referred to in Article 129(3) of Directive 2009/138/EC insurance and reinsurance undertakings should not be required to calculate a Solvency Capital Requirement on a quarterly basis. Where the calculation of the Minimum Capital Requirement does not coincide with an annual calculation of the Solvency Capital Requirement, undertakings should use the last calculated Solvency Capital Requirement in accordance with Article 102 of Directive 2009/138/EC.

(89)

In accordance with the prudent person principle set out in Article 132 of Directive 2009/138/EC and in order to ensure cross-sectoral consistency, the interests of undertakings that re-package loans into tradable securities and other financial instruments (originators, sponsors or original lenders) and the interests of the insurance and reinsurance undertakings investing in those securities or instruments should be aligned. In order to achieve this alignment, insurance and reinsurance undertakings should be allowed to invest in those securities or instruments only if the originator, sponsor or original lender retains a material net economic interest in the underlying assets. The requirement for the originator, the sponsor or the original lender to retain a material net economic interest in the underlying assets should apply also when there are multiple originators, sponsors or original lenders. To prevent any potential circumvention of the requirements, avoid misunderstandings and align the language with that used in Union legislation regulating the activities of credit instititutions, the terms ‘investment in securitisation positions’ should be used instead of ‘investment in tradable securities or other financial instruments based on repackaged loans’.

(90)

Insurance and reinsurance undertakings investing in securitisation should have a comprehensive and thorough understanding of the investment and its underlying exposures. In order to achieve that understanding, undertakings should make their investment decision only after having conducted thorough due diligence, from which they should obtain adequate information and knowledge about the securitisation.

(91)

In order to ensure that the risks arising from securitisation positions are appropriately reflected in the capital requirements of insurance and reinsurance undertakings, it is necessary to include rules providing for a risk-sensitive and prudentially sound treatment of such investments, depending on the nature and underwriting process of underlying exposures, and structural and transparency features. Securitisations that meet those requirements should be subject to a specific treatment in the spread risk sub-module, recognising their lower risk profile. Given that only the most senior tranches qualify for such a treatment, and taking into account the credit enhancement embedded in most senior tranches compared to the whole pool of underlying exposures, it is appropriate to cap the spread risk factors on such positions at the level of the spread risk factor that would be applicable to underlying exposures, namely at the level of the 3 % risk factor per year of duration applicable to unrated loans. This approach should be re-examined as part of the Commission review of the methods, assumptions and standard parameters used when calculating the Solvency Capital Requirement with the standard formula, as referred to in recital (150).

(92)

In order to avoid any regulatory arbitrage, the rules on securitisation should apply on the basis of the principle of substance over form. To this end, a clear and encompassing definition of securitisation is needed that captures any transaction or scheme whereby the credit risk associated with an exposure or pool of exposures is tranched. An exposure that creates a direct payment obligation for a transaction or scheme used to finance or operate physical assets should not be considered an exposure to a securitisation, even if the transaction or scheme has payment obligations of different seniority.

(93)

Good governance is the basis for effective and sound management of insurance and reinsurance undertakings as well as a key element of the regulatory framework. The system of governance of an insurance and reinsurance undertaking should be based on an appropriate and transparent allocation of oversight and management responsibilities to provide for an effective decision making, to prevent conflicts of interest and to ensure effective management of the undertaking.

(94)

A basic principle of good governance is that no individual should have power over decision making without any form of control. Therefore, prior to implementing any significant decision concerning the undertaking, at least one other person should review that decision.

(95)

In order to ensure the proper functioning of the risk management system, actions taken by insurance and reinsurance undertakings should include establishing, implementing, maintaining and monitoring practices and procedures appropriate to the undertaking's risk management policy, with regard to key areas of the undertakings' business.

(96)

Insurance and reinsurance undertakings should have appropriate internal controls in place in order to ensure that all persons with operational and oversight responsibilities act in accordance with the undertaking's objectives and in compliance with applicable laws, regulations and administrative provisions.

(97)

In order to ensure an economic valuation that is reliable, accurate and in compliance with Article 75 of Directive 2009/138/EC, it is important to establish and implement appropriate internal controls for the valuation of assets and liabilities of insurance and reinsurance undertakings, including an independent review and verification of the information, data and assumptions used.

(98)

In order to ensure that the valuation of technical provision is carried out in compliance with Articles 76 to 85 of Directive 2009/138/EC, the system of governance of insurance and reinsurance undertakings should include a validation process of the calculation of technical provisions.

(99)

In the context of the system of governance, in order to ensure independence, a person or organisational unit carrying out a function should be able to carry out the related duties objectively and free from influence and to report relevant findings directly to the administrative, management or supervisory body. In order to enable supervisory authorities to take timely remedial measures where necessary, insurance and reinsurance undertakings should, in a timely manner, notify the supervisory authority of information regarding all persons who effectively run the undertaking or are responsible for other key functions and other information needed to assess the fitness and propriety of these persons. However, acknowledging the need to avoid undue burdens on insurance or reinsurance undertakings or supervisors, the notification by insurance and reinsurance undertakings should not imply pre-approval by the supervisory authority. In the event that the supervisory authority concludes that a person does not comply with the fit and proper requirements set out in Directive 2009/138/EC, it should have the power to require the undertaking to replace that person.

(100)

In order to assess the reputation of the persons who effectively run the undertaking or have other key functions, the past conduct of those persons should be examined to see whether they may not be able to effectively discharge their duties in accordance with the applicable rules, regulations and guidelines. Information regarding past conduct may be information that is sourced from criminal or financial records. A person's past business conduct could provide indications as to that person's integrity.

(101)

In order to ensure that the outsourcing of functions or activities is done in an effective way and does not undermine the obligations that insurance and reinsurance undertakings have to comply with under Directive 2009/138/EC, it is necessary to provide for requirements on how to choose the service provider, on the written agreement to be concluded and on the ongoing verification that the insurance or reinsurance undertaking has to perform on the service provider.

(102)

Remuneration policies and practices which provide incentives to take risks that exceed the approved risk tolerance limits of insurance and reinsurance undertakings can undermine the effective risk management of such undertakings. It is therefore necessary to provide for requirements on remuneration for the purposes of the sound and prudent management of the business and in order to prevent remuneration arrangements which encourage excessive risk-taking.

(103)

The specification of the circumstances in which capital add-ons may be imposed and the methodologies for their calculation should ensure that the use of capital add-ons is an effective and practicable supervisory tool for the protection of policy holders and beneficiaries through the calculation of a Solvency Capital Requirement which properly reflects the overall risk profile of the insurance or reinsurance undertaking. Capital add-on amounts have a numerically positive value. The specification should also take account of the need to develop consistent and common approaches for similar circumstances. To this end reference percentages and limits could be used as presumptions to assess deviations but should not detract from the main objective of setting add-ons appropriate to the insurance or reinsurance undertaking in question.

(104)

For the purposes of the application of Article 138(4) of Directive 2009/138/EC, in deciding whether to declare the existence of an exceptional adverse situation affecting insurance and reinsurance undertakings representing a significant share of the market or affected lines of business, EIOPA should take into account all relevant factors at the level of the affected market or line of business, including those set out in this Regulation.

(105)

For the purposes of the application of Article 138(4), in deciding whether to extend the recovery period and in determining the length of such an extension for a given insurance or reinsurance undertaking, subject to the maximum of seven years set out in Article 138(4), the supervisory authority should take into account all relevant factors which are specific to the undertaking, including those set out in this Regulation.

(106)

Insurance and reinsurance undertakings are required by Directive 2009/138/EC to disclose publicly information on their solvency and financial condition. Detailed and harmonised requirements regulating the information which must be disclosed and the means by which this is to be achieved should be appropriate so as to ensure equivalent market conditions and the smooth operation of insurance and reinsurance markets throughout the Union, and to facilitate the effective integration of insurance and reinsurance markets throughout the Union.

(107)

The application of the proportionality principle in the area of public disclosure should not result in insurance and reinsurance undertakings being required to disclose any information which would not be relevant to their business or not be material.

(108)

Where references are made to equivalent information disclosed publicly under other legal or regulatory requirements, these should lead directly to the information itself and should not be a reference to a general document.

(109)

Where supervisory authorities permit insurance and reinsurance undertakings, in accordance with Article 53(1) and (2) of Directive 2009/138/EC, not to disclose certain information, such permission should remain valid only for as long as the reason for non-disclosure continues to exist. When such a reason ceases to exist and only from that date onwards, insurance and reinsurance undertakings shall disclose the relevant information.

(110)

Directive 2009/138/EC requires Member States to ensure that supervisory authorities have the power to require all information which is necessary for the purposes of supervision. An essential part of that information should be the information which must be submitted to the supervisory authorities on a regular basis.

(111)

Detailed and harmonised requirements regulating the information which must be submitted on a regular basis and the means by which this is to be achieved should be adopted to ensure effective convergence in the supervisory review process carried out by the supervisory authorities.

(112)

The information which insurance and reinsurance undertakings have to report regularly to the supervisory authorities comprises the solvency and financial condition report. In addition, they should submit the regular supervisory report which contains the information, additional to that included in the solvency and financial condition report, which is necessary for the purposes of supervision. For the benefit of both the insurance and reinsurance undertakings and the supervisory authorities, these two reports should follow the same structure.

(113)

On the basis of a risk assessment of the insurance and reinsurance undertaking in accordance with Article 36 of Directive 2009/138/EC, supervisory authorities may require an annual submission of its regular supervisory report. When this is not the case and insurance and reinsurance undertakings submit their regular supervisory report only every 3 years, they should nevertheless inform annually the supervisory authorities of any major developments that have occurred since the last reporting period.

(114)

Quantitative and qualitative information should be disclosed or submitted to the supervisory authority on a regular basis in the form of a narrative report and quantitative templates. Quantitative templates should specify in greater detail and supplement, where appropriate, the information provided in the narrative report. The report and templates should provide sufficient information, additional to the information already presented in the solvency and financial condition report, to the supervisory authorities to enable them to fulfil their responsibilities under Directive 2009/138/EC but should not result in unnecessary burden for the insurance and reinsurance undertakings. The scope of quantitative templates that have to be submitted on a quarterly basis should be narrower than the scope of quantitative templates to be submitted on an annual basis.

(115)

The application of the proportionality principle in the area of supervisory reporting should not result in insurance and reinsurance undertakings or branches established within the Union being required to submit any information which would not be relevant to their business or not be material.

(116)

Criteria and methods for the supervisory review process should be disclosed. These should cover the general means and measures supervisory authorities employ to review and evaluate compliance with the requirements set out in Article 36(2) of Directive 2009/138/EC and in particular to assess the adequacy of the risk management of insurance and reinsurance undertakings as well as their ability to withstand adverse events or changes.

(117)

The disclosure of aggregate statistical data under Article 31(2)(c) of Directive 2009/138/EC is intended to provide general information on national insurance sectors as well as on important activities of the supervisory authorities themselves. Relevant information should cover data related to both quantitative and qualitative requirements, together with aggregate national data reported in comparable terms over time.

(118)

In order to ensure comparability of supervisory disclosure, there should be a defined list of the key aspects of the application of the prudential framework on which aggregated data are to be disclosed by supervisory authorities as a minimum.

(119)

The exposure of the special purpose vehicle should always be limited in order to ensure that the special purpose vehicle has assets that are equal to or exceed its aggregate maximum risk exposure.

(120)

Where a special purpose vehicle assumes risks from more than one insurance or reinsurance undertaking, that special purpose vehicle should remain at all times protected from the winding up proceedings of any one of the other insurance or reinsurance undertakings which transfer risks to the special purpose vehicle.

(121)

Assessments of fit and proper requirements for shareholders or members having a qualifying holding in the special purpose vehicle and for persons who effectively run the special purpose vehicle should, where relevant, take account of similar requirements applying to insurance and reinsurance undertakings.

(122)

The transfer of risk from the insurance or reinsurance undertaking to the special purpose vehicle and from the special purpose vehicle to the providers of debt or financing should be free of any connected transactions which could undermine the effective transfer of risk, for example contractual rights of set-off or side agreements designed to reduce the potential or actual losses incurred as a result of the transfer of risk to the providers of debt or financing to the special purpose vehicle.

(123)

In order to ensure that the inclusion of future payments does not undermine the effective transfer of risk from the insurance or reinsurance undertaking to the special purpose vehicle, it is important that the non-receipt of payments does not negatively affect the basic own funds of the insurance or reinsurance undertaking. In determining that there is no scenario in which this could occur, the undertaking should consider all scenarios contemplated in the contractual arrangements and any other scenarios, unless the likelihood that those other scenarios will occur is excessively remote.

(124)

Article 220 of Directive 2009/138/EC requires the calculation of the solvency at the level of the group to be carried out in accordance with method 1 (accounting consolidation-based method), unless its exclusive application would not be appropriate. The group supervisor should, when assessing whether method 2 (deduction and aggregation method) should be used instead of — or in combination with — method 1, consider a number of harmonised relevant elements. One such element is whether the use of method 1 would be overly burdensome, and the nature, scale and complexity of the risks of the group are such that the use of method 2 would not materially affect the results of the group solvency calculation. In ascertaining, for these purposes, whether the use of method 2 would materially affect the results of the group solvency calculation, method 2 should be compared with method 1 using the aggregated group eligible own funds and the aggregated group Solvency Capital Requirements calculated in accordance with Directive 2009/138/EC and not with solvency requirements laid down in an equivalent third country.

(125)

In order to help ensure a level playing field in third countries, where a group includes related third country insurance or reinsurance undertakings, and where the Commission has adopted delegated acts pursuant to paragraphs 4 or 5 of Article 227 of Directive 2009/138/EC determining that the solvency regimes of those third countries are equivalent or provisionally equivalent, the group supervisor should give such a consideration priority when deciding on whether method 2 (deduction and aggregation) should be used instead of — or in combination with — method 1 (consolidation).

(126)

Directive 2009/138/EC provides that, where supervisory authorities consider that certain own funds eligible for the Solvency Capital Requirement of a related insurance or reinsurance undertaking cannot effectively be made available to cover the group Solvency Capital Requirement, those own funds may be included in the calculation only in so far as they are eligible for covering the Solvency Capital Requirement of the related undertaking. In this context, supervisory authorities should, when considering whether certain own funds of a related undertaking cannot effectively be made available for the group, base their decisions on whether there are any restrictions which affect either the fungibility of the corresponding own fund items (i.e. whether they are dedicated to absorb only certain losses) or their transferability (i.e. whether there are significant obstacles to moving own fund items from one entity to another). For the purposes of this assessment, supervisory authorities should pay particular attention to any minority interest in the eligible own funds covering the Solvency Capital Requirement of a subsidiary insurance or reinsurance undertaking, third-country insurance or reinsurance undertaking, insurance holding company or mixed financial holding company.

(127)

In order to ensure that the policy holders and beneficiaries of insurance and reinsurance undertakings belonging to a group are adequately protected in the case of the winding-up of any undertakings included in the scope of group supervision, own-fund items which are issued by insurance holding companies and mixed financial holding companies in the group should not be considered to be free from encumbrances unless the claims relating to those own-fund items rank after the claims of all policy holders and beneficiaries of the insurance or reinsurance undertakings belonging to the group.

(128)

Appropriate rules should be provided at the level of the group for the treatment of special purpose vehicles. In this context, special purpose vehicles as defined under Directive 2009/138/EC and which either comply with the requirements therein or are regulated by a third country supervisory authority and comply with equivalent requirements, should not be fully consolidated.

(129)

The calculation of the best estimate of technical provisions at the level of the group in accordance with method 1 (accounting consolidation-based method) should be based on the assumption that the sum of the best estimate of the participating insurance or reinsurance undertakings and a proportional share of the best estimate for its related undertakings, each adjusted for intra-group transactions, is approximately the same as the amount that would result from calculating the best estimate for the consolidated insurance and reinsurance obligations at the level of the group in accordance with Articles 75 to 86 of Directive 2009/138/EC. In particular, where best estimates of third-country insurance or reinsurance undertakings are used in that calculation, those best estimates should be assessed in accordance with those Articles.

(130)

The calculation of the risk margin of technical provisions at the level of the group in accordance with method 1 (accounting consolidation-based method) should be based on the assumption that the transfer of the group's insurance and reinsurance obligations is carried out separately for each insurance and reinsurance undertaking of the group and that the risk margin does not allow for the diversification between the risks of those undertakings. In relation to undertakings referred to in Article 73(2) and (5) of Directive 2009/138/EC, the calculation should be based on the assumption that the transfer of the portfolio insurance obligations for life and non-life activities is carried out separately.

(131)

Groups may apply for the use of two types of internal models to calculate their consolidated group Solvency Capital Requirement. Where an internal model is used only for the calculation of the consolidated group Solvency Capital Requirement, and is not used to calculate the Solvency Capital Requirement of a related insurance or reinsurance undertaking in the group, then Article 230 of Directive 2009/138/EC should apply. In this context, it is necessary to ensure that the approval of an internal model used to calculate only the consolidated group Solvency Capital Requirement is granted by the group supervisor in a manner consistent with the provisions set out in that Directive on the approval procedure of internal models used at individual level, including the implementing act referred to in Article 114(2) of that Directive. In order to foster cooperation within the college of supervisors, it is necessary to specify how the group supervisor should involve other supervisory authorities before making his decision on the application.

(132)

Where a group applies for the use of the same internal model to calculate the consolidated group Solvency Capital Requirement as well as the Solvency Capital Requirement of a related insurance or reinsurance undertaking in the group, then Article 231 of Directive 2009/138/EC should apply. In this context, in order to ensure that the group supervisor and the other supervisory authorities concerned effectively cooperate and make an informed joint decision on whether to permit the use of that internal model, it is necessary to set out provisions on the documentation needed and on the procedure for the joint decision on the application.

(133)

The approval of an internal model used only for the calculation of the consolidated group Solvency Capital Requirement granted on the basis of Article 230 of Directive 2009/138/EC should not influence any future permission under Article 231 of that Directive. In particular, any application for permission to calculate the consolidated group Solvency Capital Requirement together with the Solvency Capital Requirement of a related insurance or reinsurance undertaking in the group on the basis of an internal model already approved under Article 230 of Directive 2009/138/EC should follow the procedure laid down in Article 231 of that Directive.

(134)

Groups should apply for permission to use a partial internal model for the calculation of the consolidated group Solvency Capital Requirement, when only some of the related undertakings are included in the scope of the group internal model, or in relation to the limited scope referred to in Article 112(2) of Directive 2009/138/EC, or in relation to a combination of any of them.

(135)

In order for an internal model used only for the calculation of the consolidated group Solvency Capital Requirement to be widely used in and play an important role in the system of governance of the group, the output of that internal model should be used by insurance and reinsurance undertaking whose business is fully or partly in the scope of the internal model. In this context, these undertakings should not be required to meet the use test requirements as if they were using that internal model for the calculation of their Solvency Capital Requirement. The requirement to meet the use test for these undertakings should be limited to the output of that internal model and for the purposes of a consistent implementation of the risk management and internal control systems throughout the group.

(136)

In assessing whether the conditions set out in Article 236 of Directive 2009/138/EC are satisfied, the group supervisor and the other supervisory authorities concerned should take into account a number of harmonised relevant criteria in order to ensure harmonised supervision of group solvency for groups with centralised risk management.

(137)

In order to achieve an efficient cooperation in the supervision of insurance or reinsurance subsidiary undertakings in a group with a centralised risk management as provided for in Articles 237 to 243 of Directive 2009/138/EC, it is essential to harmonise the procedures to be followed by supervisory authorities in the supervision of such insurance and reinsurance subsidiary undertakings.

(138)

In order to clearly determine when an emergency situation within the meaning of Article 239(2) of Directive 2009/138/EC has arisen, the supervisory authority having authorised the insurance or reinsurance subsidiary undertaking which financial condition is deteriorating should take into account a number of harmonised criteria.

(139)

The college of supervisors should be a permanent platform for coordination among supervisory authorities, fostering a common understanding of the risk profile of the group and of its related undertakings and aiming at a more efficient and effective risk based supervision at both group and individual levels. In this context, in order to ensure a proper functioning of the college it is necessary to set out criteria for considering a branch to be significant for the purpose of the participation of supervisory authorities of significant branches in the college. It is also essential to harmonise the requirements applicable to the coordination of supervision of insurance and reinsurance groups, in order to foster the convergence of supervisory practices.

(140)

Directive 2009/138/EC requires participating insurance and reinsurance undertakings or insurance holding companies or mixed financial holding companies to disclose publicly information on the solvency and financial condition of the group. That Directive also allows them to provide a single solvency and financial condition report comprising both that group information and the solvency and financial condition information required in relation to any of their subsidiaries. That regime aims to ensure that interested stakeholders are properly informed about the solvency and financial condition of insurance and reinsurance groups, while at the same time reducing to the extent appropriate the related burden for such groups. In this context, it is necessary to harmonise the requirements applicable to public disclosure by insurance and reinsurance groups, regardless of whether such groups make use of the option to provide a single solvency and financial condition report.

(141)

Detailed and harmonised requirements regulating the information which must be submitted on a regular basis by insurance and reinsurance groups should be adopted to ensure effective convergence in the supervisory review process of group supervisors. The requirements should also facilitate the exchange of information within colleges of supervisors, and should as far as possible aim to limit the related burden for such insurance and reinsurance groups.

(142)

The assessment under Articles 172, 227 and 260 of Directive 2009/138/EC of whether a third country's solvency or prudential regime is equivalent to that laid down in Title I or Title III of that Directive should be an ongoing process and should be carried out with the objective of ensuring that the third country solvency or prudential regime demonstrates an equivalent level of policyholder and beneficiary protection as that provided under that Directive.

(143)

The assessment under Articles 172, 227 and 260 of Directive 2009/138/EC of whether a third country's solvency or prudential regime is equivalent to that laid down in Title I or Title III of that Directive should be carried out on the basis of the criteria laid down in this Regulation, respectively, in Article 378 with regard to Article 172, in Article 379 with regard to Article 227, and in Article 380 with regard to Article 260.

(144)

The determination as to whether the criteria to be taken into account when assessing third country equivalence have been met should be based on the substance of the legislation or other regulatory requirements in that third country's solvency or prudential regime, as well as how that legislation and those requirements are implemented and applied and the practices of the supervisory authorities in that third country. That determination should also take into account the extent to which the supervisory authorities in the third country apply the proportionality principle as set out in Directive 2009/138/EC.

(145)

In order to ensure that the effects of a positive equivalence finding as set out in Articles 172(2) and 172(3) Directive 2009/138/EC and in Article 211 of this Regulation do not undermine the main objective of insurance and reinsurance regulation and supervision, namely the adequate protection of policy holders and beneficiaries, the criteria for assessing equivalence under Article 172 of that Directive should encapsulate the principles set out in Title I on the general rules on the taking-up and pursuit of reinsurance activities.

(146)

In order to ensure that the taking into account of the Solvency Capital Requirement and eligible own funds laid down by a third country in the determination of group solvency where method 2 is used results in a group solvency determination equivalent to that which would result if the requirements under Directive 2009/138/EC had been used, the criteria for assessing equivalence under Article 227 of that Directive should encapsulate the principles set out in Title I, Chapter VI on the rules relating to the valuation of assets and liabilities, technical provisions, own funds, solvency capital requirement, minimum capital requirement and investment rules.

(147)

In order to ensure that the exemption of a group from group supervision at Union level does not undermine the fundamental role attributed to group supervision in Directive 2009/138/EC, the criteria for assessing equivalence under Article 260 of that Directive should encapsulate the principles set out in Title III on the supervision of insurance and reinsurance undertakings in a group.

(148)

Supervisory authorities in Member States and supervisory authorities of third countries for which there has been a positive equivalence decision or for which a temporary or provisional equivalence regime applies should cooperate and exchange information in order to ensure that there is a clear mutual understanding of group risks and solvency.

(149)

In order to ensure that information can be exchanged between supervisory authorities, supervisory authorities of third countries for which there has been a positive equivalence decision or for which a temporary or provisional equivalence regime applies should be bound by obligations of professional secrecy.

(150)

In order to ensure that the standard formula continues to meet the requirements set out in paragraphs 2 and 3 of Article 101 of Directive 2009/138/EC on an ongoing basis, the Commission will review the methods, assumptions and standard parameters used when calculating the Solvency Capital Requirement with the standard formula, in particular the methods, assumptions and standard parameters used in the market risk module as set out in Title I Chapter V Section 6, including a review of the standard parameters for fixed-income securities and long-term infrastructure, the standard parameters for premium and reserve risk set out in Annex II, the standard parameters for mortality risk, as well as the subset of standard parameters that may be replaced by undertaking-specific parameters referred to in Article 218 and the standardised methods to calculate these parameters referred to in Article 220. This review should make use of the experience gained by insurance and insurance undertakings during the transitional period and the first years of application of these delegated acts, and be performed before December 2018.

(151)

In order to enhance legal certainty about the supervisory regime during the phasing-in period provided for in Article 308a of Directive 2009/138/EC, which will start on 1 April 2015, it is important to ensure that this Regulation enters into force as soon as possible, on the day after that of its publication in the Official Journal of the European Union,

HAS ADOPTED THIS REGULATION:

TITLE I

VALUATION AND RISK-BASED CAPTAL REQUIREMENTS (PILLAR I), ENHANCED GOVERNANCE (PILLAR II) AND INCREASED TRANPARENCY (PILLAR III)

CHAPTER I

GENERAL PROVISIONS

SECTION 1

Definitions and general principles

Article 1

Definitions

For the purposes of this Regulation, the following definitions shall apply:

1.

alternative valuation methods' means valuation methods that are consistent with Article 75 of Directive 2009/138/EC, other than those which solely use the quoted market prices for the same or similar assets or liabilities;

2.

‘scenario analysis’ means the analysis of the impact of a combination of adverse events;

3.

‘health insurance obligation’ means an insurance obligation that covers one or both of the following:

(i)

the provision of medical treatment or care including preventive or curative medical treatment or care due to illness, accident, disability or infirmity, or financial compensation for such treatment or care,

(ii)

financial compensation arising from illness, accident, disability or infirmity;

4.

‘medical expense insurance obligation’ means an insurance obligation that covers the provision or financial compensation referred to in point (3)(i);

5.

‘income protection insurance obligation’ means an insurance obligation that covers the financial compensation referred to in point (3)(ii) other than the financial compensation referred to in point (3)(i);

6.

‘workers compensation insurance obligation’ means an insurance obligation that covers the provision or financial compensation referred to in points (3)(i) and (ii) and which arises only from to accidents at work, industrial injury and occupational disease;

7.

‘health reinsurance obligation’ means a reinsurance obligation which arises from accepted reinsurance covering health insurance obligations;

8.

‘medical expense reinsurance obligation’ means a reinsurance obligation which arises from accepted reinsurance covering medical expense insurance obligations;

9.

‘income protection reinsurance obligation’ means a reinsurance obligation which arises from accepted reinsurance covering income protection insurance obligations;

10.

‘workers' compensation reinsurance obligation’ means a reinsurance obligation which arises from accepted reinsurance covering workers' compensation insurance obligations;

11.

‘written premiums’ means the premiums due to an insurance or reinsurance undertaking during a specified time period regardless of whether such premiums relate in whole or in part to insurance or reinsurance cover provided in a different time period;

12.

‘earned premiums’ means the premiums relating to the risk covered by the insurance or reinsurance undertaking during a specified time period;

13.

‘surrender’ means all possible ways to fully or partly terminate a policy, including the following:

(i)

voluntary termination of the policy with or without the payment of a surrender value;

(ii)

change of insurance or reinsurance undertaking by the policy holder;

(iii)

termination of the policy resulting from the policy holder's refusal to pay the premium;

14.

‘discontinuance’ of an insurance policy means surrender, lapse without value, making a contract paid-up, automatic non-forfeiture provisions or exercising other discontinuity options or not exercising continuity options;

15.

‘discontinuity options’ mean all legal or contractual policyholder rights which allow that policyholder to fully or partly terminate, surrender, decrease, restrict or suspend insurance cover or permit the insurance policy to lapse;

16.

‘continuity options’ mean all legal or contractual policyholder rights which allow that policyholder to fully or partly establish, renew, increase, extend or resume insurance or reinsurance cover;

17.

‘coverage of an internal model’ means the risks that are reflected in the probability distribution forecast underlying the internal model;

18.

‘scope of an internal model’ means the risks that the internal model is approved to cover; the scope of an internal model may include both risks which are and which are not reflected in the standard formula for the Solvency Capital Requirement;

19.

‘investment in a tradable security or another financial instrument based on repackaged loans’ and ‘securitisation position’ means an exposure to a securitisation within the meaning of Article 4(1)(61) of Regulation (EU) No 575/2013 of the European Parliament and of the Council (1);

20.

‘resecuritisation position’ means an exposure to a resecuritisation within the meaning of Article 4(1)(63) of Regulation (EU) No 575/2013;

21.

‘originator’ means an originator within the meaning of Article 4(1)(13) of Regulation (EU) No 575/2013;

22.

‘sponsor’ means sponsor within the meaning of Article 4(1)(14) of Regulation (EU) No 575/2013;

23.

‘tranche’ means tranche within the meaning of Article 4(1)(67) of Regulation (EU) No 575/2013;

24.

‘central bank’ means central bank within the meaning ofArticle 4(1)(46) of Regulation (EU) No 575/2013.

25.

‘basis risk’ means the risk resulting from the situation in which the exposure covered by the risk-mitigation technique does not correspond to the risk exposure of the insurance or reinsurance undertaking;

26.

‘collateral arrangements’ means arrangements under which collateral providers do one of the following:

(a)

transfer full ownership of the collateral to the collateral taker for the purposes of securing or otherwise covering the performance of a relevant obligation;

(b)

provide collateral by way of security in favour of, or to, a collateral taker, and the legal ownership of the collateral remains with the collateral provider or a custodian when the security right is established;

27.

in relation to a set of items, ‘all possible combinations of two’ such items means all ordered pairs of items from that set;

28.

‘pooling arrangement’ means an arrangement whereby several insurance or reinsurance undertakings agree to share identified insurance risks in defined proportions. The parties insured by the members of the pooling arrangement are not themselves members of the pooling arrangement.

29.

‘pool exposure of type A’ means the risk ceded by an insurance or reinsurance undertaking to a pooling arrangement where the insurance or reinsurance undertaking is not a party to that pooling arrangement.

30.

‘pool exposure of type B’ means the risk ceded by an insurance or reinsurance undertaking to another member of a pooling arrangement, where the insurance or reinsurance undertaking is a party to that pooling arrangement;

31.

‘pool exposure of type C’ means the risk ceded by an insurance or reinsurance undertaking which is a party to a pooling arrangement to another insurance or reinsurance undertaking which is not a member of that pooling arrangement.

32.

‘deep market’ means a market where transactions involving a large quantity of financial instruments can take place without significantly affecting the price of the instruments.

33.

‘liquid market’ means a market where financial instruments can readily be converted through an act of buying or selling without causing a significant movement in the price.

34.

‘transparent market’ means a market where current trade and price information is readily available to the public, in particular to the insurance or reinsurance undertakings.

35.

‘future discretionary bonuses’ and ‘future discretionary benefits’ mean future benefits other than index-linked or unit-linked benefits of insurance or reinsurance contracts which have one of the following characteristics:

(a)

they are legally or contractually based on one or more of the following results:

(i)

the performance of a specified group of contracts or a specified type of contract or a single contract;

(ii)

the realised or unrealised investment return on a specified pool of assets held by the insurance or reinsurance undertaking;

(iii)

the profit or loss of the insurance or reinsurance undertaking or fund corresponding to the contract;

(b)

they are based on a declaration of the insurance or reinsurance undertaking and the timing or the amount of the benefits is at its full or partial discretion;

36.

‘basic risk-free interest rate term structure’ means a risk-free interest rate term structure which is derived in the same way as the relevant risk-free interest rate term structure to be used to calculate the best estimate referred to in Article 77(2) of Directive 2009/138/EC but without application of a matching adjustment or a volatility adjustment or a transitional adjustment to the relevant risk-free rate structure in accordance with Article 308c of that Directive;

37.

‘matching adjustment portfolio’ means a portfolio of insurance or reinsurance obligations to which the matching adjustment is applied and the assigned portfolio of assets as referred to in Article 77b(1)(a) of Directive 2009/138/EC.

38.

‘SLT Health obligations’ means health insurance obligations that are assigned to the lines of business for life insurance obligations in accordance with Article 55(1).

39.

‘NSLT Health obligations’ means health insurance obligations that are assigned to the lines of business for non-life insurance obligations in accordance with Article 55(1).

40.

‘Collective investment undertaking’ means an undertaking for collective investment in transferable securities (UCITS) as defined in Article 1(2) of Directive 2009/65/EC of the European Parliament and of the Council (2) or an alternative investment fund (AIF) as defined in Article 4(1)(a) of Directive 2011/61/EU of the European Parliament and of the Council (3);

41.

in relation to an insurance or reinsurance undertaking, ‘major business unit’ means a defined segment of the insurance and reinsurance undertaking that operates independently from other parts of the undertaking and has dedicated governance resources and procedures within the undertaking and which contains risks that are material in relation to the entire business of the undertaking;

42.

in relation to an insurance or reinsurance group, ‘major business unit’ means a defined segment of the group that operates independently from other parts of the group and has dedicated governance resources and procedures within the group and which contains risks that are material in relation to the entire business of the group; any legal entity belonging to the group is a major business unit or consists of several major business units;

43.

‘administrative, management or supervisory body’ shall mean, where a two-tier board system comprising of a management body and a supervisory body is provided for under national law, the management body or the supervisory body or both of those bodies as specified in the relevant national legislation or, where nobody is specified in the relevant national legislation, the management body;

44.

‘aggregate maximum risk exposure’ means the sum of the maximum payments, including expenses that the special purpose vehicles may incur, excluding expenses that meet all of the following criteria:

(a)

the special purpose vehicle has the right to require the insurance or reinsurance undertaking which has transferred risks to the special purpose vehicle to pay the expense;

(b)

the special purpose vehicle is not required to pay the expense unless and until an amount equal to the expense has been received from the insurance or reinsurance undertaking which has transferred the risks to the special purpose vehicle;

(c)

the insurance or reinsurance undertaking which has transferred risks to the special purpose vehicle does not include the expense as an amount recoverable from the special purpose vehicle in accordance with Article 41 of this Regulation.

45.

‘existing insurance or reinsurance contract’ means an insurance or reinsurance contract for which insurance or reinsurance obligations have been recognised;

46.

‘the expected profit included in future premiums’ means the expected present value of future cash flows which result from the inclusion in technical provisions of premiums relating to existing insurance and reinsurance contracts that are expected to be received in the future, but that may not be received for any reason, other than because the insured event has occurred, regardless of the legal or contractual rights of the policyholder to discontinue the policy.

47.

‘mortgage insurance’ means credit insurance that provides cover to lenders in case their mortgage loans default.

48.

‘subsidiary undertaking’ means any subsidiary undertaking within the meaning of Article 22(1) and (2) of Directive 2013/34/EU, including subsidiaries thereof;

49.

‘related undertaking’ either a subsidiary undertaking or other undertaking in which a participation is held, or an undertaking linked with another undertaking by a relationship as set out in Article 22(7) of Directive 2013/34/EU;

50.

‘regulated undertaking’ means ‘regulated entity’ within the meaning of Article 2(4) of Directive 2002/87/EC of the European Parliament and of the Council (4);

51.

‘non-regulated undertaking’ means any undertaking other than those listed in Article 2(4) of Directive 2002/87/EC;

52.

‘non-regulated undertaking carrying out financial activities’ means a non-regulated undertaking which carries one or more of the activities referred to in Annex I of Directive 2013/36/EU of the European Parliament and of the Council (5) where those activities constitute a significant part of its overall activity;

53.

‘ancillary services undertaking’ means a non-regulated undertaking the principal activity of which consists of owning or managing property, managing data-processing services, health and care services or any other similar activity which is ancillary to the principal activity of one or more insurance or reinsurance undertakings.

54.

‘UCITS management company’ means a management company within the meaning of Article 2(1)(b) of Directive 2009/65/EC or an investment company authorised pursuant to Article 27 of that Directive provided that it has not designated a management company pursuant to that Directive;

55.

‘alternative investment fund manager’ means an alternative investment funds manager within the meaning of Article 4(1)(b) of Directive 2011/61/EU;

56.

‘institutions for occupational retirement provision’ means institutions within the meaning of Article 6(a) of Directive 2003/41/EC of the European Parliament and of the Council (6);

57.

‘domestic insurance undertaking’ means an undertaking authorised and supervised by third-country supervisory authorities which would require authorisation as an insurance undertaking in accordance with Article 14 of Directive 2009/138/EC if its head office were situated in the Union;

58.

‘domestic reinsurance undertaking’ means an undertaking authorised and supervised by third-country supervisory authorities which would require authorisation as a reinsurance undertaking in accordance with Article 14 of Directive 2009/138/EC if its head offices were situated in the Union.

Article 2

Expert judgement

1.   Where insurance and reinsurance undertakings make assumptions about rules relating to the valuation of assets and liabilities, technical provisions, own funds, solvency capital requirements, minimum capital requirements and investment rules, these assumptions shall be based on the expertise of persons with relevant knowledge, experience and understanding of the risks inherent in the insurance or reinsurance business.

2.   Insurance and reinsurance undertakings shall, taking due account of the principle of proportionality, ensure that internal users of the relevant assumptions are informed about their relevant content, their degree of reliability and their limitations. For that purpose, service providers to whom functions or activities have been outsourced shall be considered to be internal users.

SECTION 2

External credit assessments

Article 3

Association of credit assessments to credit quality steps

The scale of credit quality steps referred to in Article 109a(1) of Directive 2009/138/EC shall include credit quality steps 0 to 6.

Article 4

General requirements on the use of credit assessments

1.   Insurance or reinsurance undertakings may use an external credit assessment for the calculation of the Solvency Capital Requirement in accordance with the standard formula only where it has been issued by an External Credit Assessment Institution (ECAI) or endorsed by an ECAI in accordance with Regulation (EC) No 1060/2009 of the European Parliament and of the Council (7).

2.   Insurance or reinsurance undertakings shall nominate one or more ECAI to be used for the calculation of the Solvency Capital Requirement according to the standard formula.

3.   The use of credit assessments shall be consistent and such assessments shall not be used selectively

4.   When using credit assessments, insurance and reinsurance undertakings shall comply with all of the following requirements:

(a)

where an insurance or reinsurance undertaking decides to use the credit assessments produced by a nominated ECAI for a certain class of items, it shall use those credit assessments consistently for all items belonging to that class;

(b)

where an insurance or reinsurance undertaking decides to use the credit assessments produced by a nominated ECAI, it shall use them in a continuous and consistent way over time;

(c)

an insurance or reinsurance undertaking shall only use nominated ECAI credit assessments that take into account all amounts of principal and interest owed to it;

(d)

where only one credit assessment is available from a nominated ECAI for a rated item, that credit assessment shall be used to determine the capital requirements for that item;

(e)

where two credit assessments are available from nominated ECAIs and they correspond to different parameters for a rated item, the assessment generating the higher capital requirement shall be used;

(f)

where more than two credit assessments are available from nominated ECAIs for a rated item, the two assessments generating the two lowest capital requirements shall be used. If the two lowest capital requirements are different, the assessment generating the higher capital requirement of those two credit assessments shall be used. If the two lowest capital requirements are the same, the assessment generating that capital requirement shall be used;

(g)

where available, insurance and reinsurance undertakings shall use both solicited and unsolicited credit assessments.

5.   Where an item is part of the larger or more complex exposures of the insurance or reinsurance undertaking, the undertaking shall produce its own internal credit assessment of the item and allocate it to one of the seven steps in a credit quality assessment scale. Where the own internal credit assessment generates a lower capital requirement than the one generated by the credit assessments available from nominated ECAIs, then the own internal credit assessment shall not be taken into account for the purposes of this Regulation.

6.   For the purposes of paragraph 5, the larger or more complex exposures of an undertaking shall include type 2 securitisation positions as referred to in Article 177(3) and resecuritisation positions.

Article 5

Issuers and issue credit assessment

1.   Where a credit assessment exists for a specific issuing program or facility to which the item constituting the exposure belongs, that credit assessment shall be used.

2.   Where no directly applicable credit assessment exists for a certain item, but a credit assessment exists for a specific issuing program or facility to which the item constituting the exposure does not belong or a general credit assessment exists for the issuer, that credit assessment shall be used in either of the following cases:

(a)

it produces the same or higher capital requirement than would otherwise be the case and the exposure in question ranks pari passu or junior in all respects to the specific issuing program or facility or to senior unsecured exposures of that issuer, as relevant;

(b)

it produces the same or lower capital requirement than would otherwise be the case and the exposure in question ranks pari passu or senior in all respects to the specific issuing program or facility or to senior unsecured exposures of that issuer, as relevant.

In all other cases, insurance or reinsurance undertakings shall consider that there is no credit assessment by a nominated ECAI available for the exposure.

3.   Credit assessments for issuers within a corporate group shall not be used as the credit assessment for another issuer within the same corporate group.

Article 6

Double credit rating for securitisation positions

By way of derogation from Article 4(4)(d), where only one credit assessment is available from a nominated ECAI for a securitisation position, that credit assessment shall not be used. The capital requirements for that item shall be derived as if no credit assessment by a nominated ECAI is available.

CHAPTER II

VALUATION OF ASSETS AND LIABILITIES

Article 7

Valuation assumptions

Insurance and reinsurance undertakings shall value assets and liabilities based on the assumption that the undertaking will pursue its business as a going concern.

Article 8

Scope

Articles 9 to 16 shall apply to the recognition and valuation of assets and liabilities, other than technical provisions.

Article 9

Valuation methodology — general principles

1.   Insurance and reinsurance undertakings shall recognise assets and liabilities in conformity with the international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002.

2.   Insurance and reinsurance undertakings shall value assets and liabilities in accordance with international accounting standards adopted by the Commission pursuant to Regulation (EC) No 1606/2002 provided that those standards include valuation methods that are consistent with the valuation approach set out in Article 75 of Directive 2009/138/EC. Where those standards allow for the use of more than one valuation method, insurance and reinsurance undertakings shall only use valuation methods that are consistent with Article 75 of Directive 2009/138/EC.

3.   Where the valuation methods included in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002 are not consistent either temporarily or permanently with the valuation approach set out in Article 75 of Directive 2009/138/EC, insurance and reinsurance undertakings shall use other valuation methods that are deemed to be consistent with Article 75 of Directive 2009/138/EC.

4.   By way of derogation from paragraphs 1 and 2, and in particular by respecting the principle of proportionality laid down in paragraphs 3 and 4 of Article 29 of Directive 2009/138/EC, insurance and reinsurance undertakings may recognise and value an asset or a liability based on the valuation method it uses for preparing its annual or consolidated financial statements provided that:

(a)

the valuation method is consistent with Article 75 of Directive 2009/138/EC;

(b)

the valuation method is proportionate with respect to the nature, scale and complexity of the risks inherent in the business of the undertaking;

(c)

the undertaking does not value that asset or liability using international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002 in its financial statements;

(d)

valuing assets and liabilities using international accounting standards would impose costs on the undertaking that would be disproportionate with respect to the total administrative expenses.

5.   Insurance and reinsurance undertakings shall value individual assets separately.

6.   Insurance and reinsurance undertakings shall value individual liabilities separately.

Article 10

Valuation methodology — valuation hierarchy

1.   Insurance and reinsurance undertakings shall, when valuing assets and liabilities in accordance with Article 9 (1), (2) and (3), follow the valuation hierarchy set out in paragraphs 2 to 7, taking into account the characteristics of the asset or liability where market participants would take those characteristics into account when pricing the asset or liability at the valuation date, including the condition and location of the asset or liability and restrictions, if any, on the sale or use of the asset.

2.   As the default valuation method insurance and reinsurance undertakings shall value assets and liabilities using quoted market prices in active markets for the same assets or liabilities.

3.   Where the use of quoted market prices in active markets for the same assets or liabilities is not possible, insurance and reinsurance undertakings shall value assets and liabilities using quoted market prices in active markets for similar assets and liabilities with adjustments to reflect differences. Those adjustments shall reflect factors specific to the asset or liability including all of the following:

(a)

the condition or location of the asset or liability;

(b)

the extent to which inputs relate to items that are comparable to the asset or liability; and

(c)

the volume or level of activity in the markets within which the inputs are observed.

4.   Insurance and reinsurance undertakings' use of quoted market prices shall be based on the criteria for active markets, as defined in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002.

5.   Where the criteria referred to in paragraph 4 are not satisfied, insurance and reinsurance undertakings shall, unless otherwise provided in this Chapter, use alternative valuation methods.

6.   When using alternative valuation methods, insurance and reinsurance undertakings shall rely as little as possible on undertaking-specific inputs and make maximum use of relevant market inputs including the following:

(a)

quoted prices for identical or similar assets or liabilities in markets that are not active;

(b)

inputs other than quoted prices that are observable for the asset or liability, including interest rates and yield curves observable at commonly quoted intervals, implied volatilities and credit spreads;

(c)

market-corroborated inputs, which may not be directly observable, but are based on or supported by observable market data.

All those markets inputs shall be adjusted for the factors referred to in paragraph 3.

To the extent that relevant observable inputs are not available including in circumstances where there is little, if any, market activity for the asset or liability at the valuation date, undertakings shall use unobservable inputs reflecting the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk. Where unobservable inputs are used, undertakings shall adjust undertaking-specific data if reasonable available information indicates that other market participants would use different data or there is something particular to the undertaking that is not available to other market participants.

When assessing the assumptions about risk referred to in this paragraph undertakings shall take into account the risk inherent in the specific valuation technique used to measure fair value and the risk inherent in the inputs of that valuation technique.

7.   Undertakings shall use valuation techniques that are consistent with one or more of the following approaches when using alternative valuation methods:

(a)

market approach, which uses prices and other relevant information generated by market transactions involving identical or similar assets, liabilities or group of assets and liabilities. Valuation techniques consistent with the market approach include matrix pricing.

(b)

income approach, which converts future amounts, such as cash flows or income or expenses, to a single current amount. The fair value shall reflect current market expectations about those future amounts. Valuation techniques consistent with the income approach include present value techniques, option pricing models and the multi-period excess earnings method;

(c)

cost approach or current replacement cost approach reflects the amount that would be required currently to replace the service capacity of an asset. From the perspective of a market participant seller, the price that would be received for the asset is based on the cost to a market participant buyer to acquire or construct a substitute asset of comparable quality adjusted for obsolescence.

Article 11

Recognition of contingent liabilities

1.   Insurance and reinsurance undertakings shall recognise contingent liabilities, as defined in accordance with Article 9 of this Regulation, that are material, as liabilities.

2.   Contingent liabilities shall be material where information about the current or potential size or nature of those liabilities could influence the decision-making or judgement of the intended user of that information, including the supervisory authorities.

Article 12

Valuation methods for goodwill and intangible assets

Insurance and reinsurance undertakings shall value the following assets at zero:

1.

goodwill;

2.

intangible assets other than goodwill, unless the intangible asset can be sold separately and the insurance and reinsurance undertaking can demonstrate that there is a value for the same or similar assets that has been derived in accordance with Article 10(2), in which case the asset shall be valued in accordance with Article 10.

Article 13

Valuation methods for related undertakings

1.   For the purposes of valuing the assets of individual insurance and reinsurance undertakings, insurance and reinsurance undertakings shall value holdings in related undertakings, within the meaning of Article 212(1)(b) of Directive 2009/138/EC in accordance with the following hierarchy of methods:

(a)

using the default valuation method set out in Article 10(2) of this Regulation;

(b)

using the adjusted equity method referred to in paragraph 3 where valuation in accordance with point (a) is not possible;

(c)

using either the valuation method set out in Article 10(3) of this Regulation or alternative valuation methods in accordance with Article 10(5) of this Regulation provided that all of the following conditions are fulfilled:

(i)

neither valuation in accordance with point (a) nor point (b) is possible;

(ii)

the undertaking is not a subsidiary undertaking, as defined in Article 212(2) of Directive 2009/138/EC.

2.   By way of derogation from paragraph 1, for the purposes of valuing the assets of individual insurance and reinsurance undertakings, insurance and reinsurance undertakings shall value holdings in the following undertakings at zero:

(a)

undertakings that are excluded from the scope of the group supervision under Article 214(2)(a) of Directive 2009/138/EC;

(b)

undertakings that are deducted from the own funds eligible for the group solvency in accordance with Article 229 of Directive 2009/138/EC.

3.   The adjusted equity method referred to in point (b) of paragraph 1 shall require the participating undertaking to value its holdings in related undertakings based on the share of the excess of assets over liabilities of the related undertaking held by the participating undertaking.

4.   When calculating the excess of assets over liabilities for related undertakings, the participating undertaking shall value the undertaking's individual assets and liabilities in accordance with Articles 75 of Directive 2009/138/EC and, where the related undertaking is an insurance or reinsurance undertaking or a special purpose vehicle referred to in Article 211 of that Directive, technical provisions in accordance Articles 76 to 85 of that Directive.

5.   When calculating the excess of assets over liabilities for related undertakings other than insurance or reinsurance undertakings, the participating undertaking may consider the equity method as prescribed in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002 to be consistent with Articles 75 of Directive 2009/138/EC, where valuation of individual assets and liabilities in accordance with paragraph 4 is not practicable. In such cases, the participating undertaking shall deduct from the value of the related undertaking the value of goodwill and other intangible assets that would be valued at zero in accordance with Article 12(2) of this Regulation.

6.   Where the criteria referred to in Article 9(4) of this Regulation are satisfied, and where the use of the valuation methods referred to in paragraphs (a) and (b) is not possible, holdings in related undertakings may be valued based on the valuation method the insurance or reinsurance undertakings uses for preparing its annual or consolidated financial statements. In such cases, the participating undertaking shall deduct from the value of the related undertaking the value of goodwill and other intangible assets that would be valued at zero in accordance with Article 12(2) of this Regulation.

Article 14

Valuation methods for specific liabilities

1.   Insurance and reinsurance undertakings shall value financial liabilities, as referred to in international accounting standards adopted by the Commission in accordance with Regulation (EC) No 1606/2002, in accordance with Article 9 of this Regulation upon initial recognition. There shall be no subsequent adjustment to take account of the change in own credit standing of the insurance or reinsurance undertaking after initial recognition.

2.   Insurance and reinsurance undertakings shall value contingent liabilities that have been recognised in accordance with Article 11. The value of contingent liabilities shall be equal to the expected present value of future cash flows required to settle the contingent liability over the lifetime of that contingent liability, using the basic risk-free interest rate term structure.

Article 15

Deferred taxes

1.   Insurance and reinsurance undertakings shall recognise and value deferred taxes in relation to all assets and liabilities, including technical provisions, that are recognised for solvency or tax purposes in accordance with Article 9.

2.   Notwithstanding paragraph 1, insurance and reinsurance undertakings shall value deferred taxes, other than deferred tax assets arising from the carryforward of unused tax credits and the carryforward of unused tax losses, on the basis of the difference between the values ascribed to assets and liabilities recognised and valued in accordance with Article 75 of Directive 2009/138/EC and in the case of technical provisions in accordance with Articles 76 to 85 of that Directive and the values ascribed to assets and liabilities as recognised and valued for tax purposes.

3.   Insurance and reinsurance undertaking shall only ascribe a positive value to deferred tax assets where it is probable that future taxable profit will be available against which the deferred tax asset can be utilised, taking into account any legal or regulatory requirements on the time limits relating to the carryforward of unused tax losses or the carryforward of unused tax credits.

Article 16

Exclusion of valuation methods

1.   Insurance and reinsurance undertakings shall not value financial assets or financial liabilities at cost or amortized cost.

2.   Insurance and reinsurance undertakings shall not apply valuation models that value at the lower of the carrying amount and fair value less costs to sell.

3.   Insurance and reinsurance undertakings shall not value property, investment property, plant and equipment with cost models where the asset value is determined as cost less depreciation and impairment.

4.   Insurance and reinsurance undertakings which are lessees in a financial lease or lessors shall comply with all of the following when valuing assets and liabilities in a lease arrangement:

(a)

lease assets shall be valued at fair value;

(b)

for the purposes of determining the present value of the minimum lease payments market consistent inputs shall be used and no subsequent adjustments to take account of the own credit standing of the undertaking shall be made;

(c)

valuation at depreciated cost shall not be applied.

5.   Insurance and reinsurance undertakings shall adjust the net realisable value for inventories by the estimated cost of completion and the estimated costs necessary to make the sale where those costs are material. Those costs shall be considered to be material where their non-inclusion could influence the decision-making or the judgement of the users of the balance sheet, including the supervisory authorities. Valuation at cost shall not be applied.

6.   Insurance and reinsurance undertakings shall not value non-monetary grants at a nominal amount.

7.   When valuing biological assets, insurance and reinsurance undertakings shall adjust the value by adding the estimated costs to sell if the estimated costs to sell are material.

CHAPTER III

RULES RELATING TO TECHNICAL PROVISIONS

SECTION 1

General provisions

Article 17

Recognition and derecognition of insurance and reinsurance obligations

For the calculation of the best estimate and the risk margin of technical provisions, insurance and reinsurance undertakings shall recognise an insurance or reinsurance obligation at the date the undertaking becomes a party to the contract that gives rise to the obligation or the date the insurance or reinsurance cover begins, whichever date occurs earlier. Insurance and reinsurance undertakings shall only recognise the obligations within the boundary of the contract.

Insurance and reinsurance undertakings shall derecognise an insurance or reinsurance obligation only when it is extinguished, discharged, cancelled or expires.

Article 18

Boundary of an insurance or reinsurance contract

1.   The boundaries of an insurance or reinsurance contract shall be defined in accordance with paragraphs 2 to 7.

2.   All obligations relating to the contract, including obligations relating to unilateral rights of the insurance or reinsurance undertaking to renew or extend the scope of the contract and obligations that relate to paid premiums, shall belong to the contract unless otherwise stated in paragraphs 3 to 6.

3.   Obligations which relate to insurance or reinsurance cover provided by the undertaking after any of the following dates do not belong to the contract, unless the undertaking can compel the policyholder to pay the premium for those obligations:

(a)

the future date where the insurance or reinsurance undertaking has a unilateral right to terminate the contract;

(b)

the future date where the insurance or reinsurance undertaking has a unilateral right to reject premiums payable under the contract;

(c)

the future date where the insurance or reinsurance undertaking has a unilateral right to amend the premiums or the benefits payable under the contract in such a way that the premiums fully reflect the risks.

Point (c) shall be deemed to apply where an insurance or reinsurance undertaking has a unilateral right to amend at a future date the premiums or benefits of a portfolio of insurance or reinsurance obligations in such a way that the premiums of the portfolio fully reflect the risks covered by the portfolio.

However, in the case of life insurance obligations where an individual risk assessment of the obligations relating to the insured person of the contract is carried out at the inception of the contract and that assessment cannot be repeated before amending the premiums or benefits, insurance and reinsurance undertakings shall assess at the level of the contract whether the premiums fully reflect the risk for the purposes of point (c).

Insurance and reinsurance undertakings shall not take into account restrictions of the unilateral right as referred to in points (a), (b) and (c) of this paragraph and limitations of the extent to which premiums or benefits can be amended that have no discernible effect on the economics of the contract.

4.   Where the insurance or reinsurance undertaking has a unilateral right as referred to in paragraph 3 that only relates to a part of the contract, the same principles as defined in paragraph 3 shall apply to that part of the contract.

5.   Obligations that do not relate to premiums which have already been paid do not belong to an insurance or reinsurance contract, unless the undertaking can compel the policyholder to pay the future premium, and where all of the following requirements are met:

(a)

the contract does not provide compensation for a specified uncertain event that adversely affects the insured person;

(b)

the contract does not include a financial guarantee of benefits.

For the purpose of points (a) and (b), insurance and reinsurance undertakings shall not take into account coverage of events and guarantees that have no discernible effect on the economics of the contract.

6.   Where an insurance or reinsurance contract can be unbundled into two parts and where one of those parts meets the requirements set out in points (a) and (b) of paragraph 5, any obligations that do not relate to the premiums of that part and which have already been paid do not belong to the contract, unless the undertaking can compel the policyholder to pay the future premium of that part.

7.   Insurance and reinsurance undertakings shall, for the purposes of paragraph 3, only consider that premiums fully reflect the risks covered by a portfolio of insurance or reinsurance obligations, where there is no circumstance under which the amount of the benefits and expenses payable under the portfolio exceeds the amount of the premiums payable under the portfolio.

SECTION 2

Data quality

Article 19

Data used in the calculation of technical provisions

1.   Data used in the calculation of the technical provisions shall only be considered to be complete for the purpose of Article 82 of Directive 2009/138/EC where all of the following conditions are met:

(a)

the data include sufficient historical information to assess the characteristics of the underlying risks and to identify trends in the risks;

(b)

the data are available for each of the relevant homogeneous risk groups used in the calculation of the technical provisions and no relevant data is excluded from being used in the calculation of the technical provisions without justification.

2.   Data used in the calculation of the technical provisions shall only be considered to be accurate for the purpose of Article 82 of Directive 2009/138/EC where all of the following conditions are met:

(a)

the data are free from material errors;

(b)

data from different time periods used for the same estimation are consistent;

(c)

the data are recorded in a timely manner and consistently over time.

3.   Data used in the calculation of the technical provisions shall only be considered to be appropriate for the purpose of Article 82 of Directive 2009/138/EC where all of the following conditions are met:

(a)

the data are consistent with the purposes for which they will be used;

(b)

the amount and nature of the data ensure that the estimations made in the calculation of the technical provisions on the basis of the data do not include a material estimation error;

(c)

the data are consistent with the assumptions underlying the actuarial and statistical techniques that are applied to them in the calculation of the technical provisions;

(d)

the data appropriately reflect the risks to which the insurance or reinsurance undertaking is exposed with regard to its insurance and reinsurance obligations;

(e)

the data were collected, processed and applied in a transparent and structured manner, based on a documented process that comprises all of the following:

(i)

the definition of criteria for the quality of data and an assessment of the quality of data, including specific qualitative and quantitative standards for different data sets;

(ii)

the use of and setting of assumptions made in the collection, processing and application of data;

(iii)

the process for carrying out data updates, including the frequency of updates and the circumstances that trigger additional updates;

(f)

Insurance or reinsurance undertakings shall ensure that their data are used consistently over time in the calculation of the technical provisions.

For the purposes of point (b), an estimation error in the calculation of the technical provisions shall be considered to be material where it could influence the decision-making or the judgement of the users of the calculation result, including the supervisory authorities.

4.   Insurance and reinsurance undertakings may use data from an external source provided that, in addition to fulfilling the requirements set out in paragraphs 1 to 4, all of the following requirements are met:

(a)

insurance or reinsurance undertakings are able to demonstrate that the use of that data is more suitable than the use of data which are exclusively available from an internal source;

(b)

insurance or reinsurance undertakings know the origin of that data and the assumptions or methodologies used to process that data;

(c)

insurance or reinsurance undertakings identify any trends in that data and the variation, over time or across data, of the assumptions or methodologies in the use of that data;

(d)

insurance or reinsurance undertakings are able to demonstrate that the assumptions and methodologies referred to in points (b) and (c) reflect the characteristics of the insurance or reinsurance undertaking's portfolio of insurance and reinsurance obligations.

Article 20

Limitations of data

Where data does not comply with Article 19, insurance and reinsurance undertakings shall document appropriately the limitations of the data including a description of whether and how such limitations will be remedied and of the functions within the system of governance of the insurance or reinsurance undertaking responsible for that process. The data, before adjustments to remedy limitations are made to it, shall be recorded and stored appropriately.

Article 21

Appropriate use of approximations to calculate the best estimate

Where insurance and reinsurance undertakings have insufficient data of appropriate quality to apply a reliable actuarial method, they may use appropriate approximations to calculate the best estimate provided that all of the following requirements are met:

(a)

the insufficiency of data is not due to inadequate internal processes and procedures of collecting, storing or validating data used for the valuation of technical provisions;

(b)

the insufficiency of data cannot be remedied by the use of external data;

(c)

it would not be practicable for the undertaking to adjust the data to remedy the insufficiency.

SECTION 3

Methodologies to calculate technical provisions

Subsection 1

Assumptions underlying the calculation of technical provisions

Article 22

General provisions

1.   Assumptions shall only be considered to be realistic for the purposes of Article 77(2) of Directive 2009/138/EC where they meet all of the following conditions:

(a)

insurance and reinsurance undertakings are able to explain and justify each of the assumptions used, taking into account the significance of the assumption, the uncertainty involved in the assumption as well as relevant alternative assumptions;

(b)

the circumstances under which the assumptions would be considered false can be clearly identified;

(c)

unless otherwise provided in this Chapter, the assumptions are based on the characteristics of the portfolio of insurance and reinsurance obligations, where possible regardless of the insurance or reinsurance undertaking holding the portfolio;

(d)

insurance and reinsurance undertakings use the assumptions consistently over time and within homogeneous risk groups and lines of business, without arbitrary changes;

(e)

the assumptions adequately reflect any uncertainty underlying the cash flows.

For the purpose of point (c), insurance and reinsurance undertakings shall only use information specific to the undertaking, including information on claims management and expenses, where that information better reflects the characteristics of the portfolio of insurance or reinsurance obligations than information that is not limited to the specific undertaking or where the calculation of technical provisions in a prudent, reliable and objective manner without using that information is not possible.

2.   Assumptions shall only be used for the purpose of Article 77(3) of Directive 2009/138/EC where they comply with paragraph 1 of this Article.

3.   Insurance and reinsurance undertakings shall set assumptions on future financial market parameters or scenarios that are appropriate and consistent with Article 75 of Directive 2009/138/EC. Where insurance and reinsurance undertakings use a model to produce projections of future financial market parameters, it shall comply with all of the following requirements:

(a)

it generates asset prices that are consistent with asset prices observed in financial markets;

(b)

it assumes no arbitrage opportunity;

(c)

the calibration of the parameters and scenarios is consistent with the relevant risk-free interest rate term structure used to calculate the best estimate as referred to in Article 77(2) of Directive 2009/138/EC.

Article 23

Future management actions

1.   Assumptions on future management actions shall only be considered to be realistic for the purposes of Article 77(2) of Directive 2009/138/EC where they meet all of the following conditions:

(a)

the assumptions on future management actions are determined in an objective manner;

(b)

assumed future management actions are consistent with the insurance or reinsurance undertaking's current business practice and business strategy, including the use of risk-mitigation techniques; where there is sufficient evidence that the undertaking will change its practices or strategy, the assumed future management actions are consistent with the changed practices or strategy;

(c)

assumed future management actions are consistent with each other;

(d)

assumed future management actions are not contrary to any obligations towards policy holders and beneficiaries or to legal requirements applicable to the undertaking;

(e)

assumed future management actions take account of any public indications by the insurance or reinsurance undertaking as to the actions that it would expect to take or not take.

2.   Assumptions about future management actions shall be realistic and include all of the following:

(i)

a comparison of assumed future management actions with management actions taken previously by the insurance or reinsurance undertaking;

(ii)

a comparison of future management actions taken into account in the current and in the past calculations of the best estimate;

(iii)

an assessment of the impact of changes in the assumptions on future management actions on the value of the technical provisions.

Insurance and reinsurance undertakings shall be able to explain any relevant deviations in relation to points (i) and (ii) upon request of the supervisory authorities and, where changes in an assumption on future management actions have a significant impact on the technical provisions, the reasons for that sensitivity and how the sensitivity is taken into account in the decision-making process of the insurance or reinsurance undertaking.

3.   For the purpose of paragraph 1, insurance and reinsurance undertakings shall establish a comprehensive future management actions plan, approved by the administrative, management or supervisory body of the insurance and reinsurance undertaking, which provides for all of the following:

(a)

the identification of future management actions that are relevant to the valuation of the technical provisions;

(b)

the identification of the specific circumstances in which the insurance or reinsurance undertaking would reasonably expect to carry out each respective future management action referred to in point (a);

(c)

the identification of the specific circumstances in which the insurance or reinsurance undertaking may not be able to carry out each respective future management action referred to in point (a), and a description of how those circumstances are considered in the calculation of technical provisions;

(d)

the order in which future management actions referred to in point (a) would be carried out and the governance requirements applicable to those future management actions;

(e)

a description of any on-going work required to ensure that the insurance or reinsurance undertaking is in a position to carry out each respective future management action referred to in point (a);

(f)

a description of how the future management actions referred to in point (a) have been reflected in the calculation of the best estimate;

(g)

a description of the applicable internal reporting procedures that cover the future management actions referred to in point (a) included in the calculation of the best estimate;

4.   Assumptions about future management actions shall take account of the time needed to implement the management actions and any expenses caused by them.

5.   The system for ensuring the transmission of information shall only be considered to be effective for the purpose of Article 41(1) of Directive 2009/138/EC where the reporting procedures referred to in point (g) of paragraph 3 of this Article include at least an annual communication to the administrative, supervisory or management body.

Article 24

Future discretionary benefits

Where future discretionary benefits depend on the assets held by the insurance or reinsurance undertaking, undertakings shall base the calculation of the best estimate on the assets currently held by the undertakings and shall assume future changes of their asset allocation in accordance with Article 23. The assumptions on the future returns of the assets shall be consistent with the relevant risk-free interest rate term structure, including where applicable a matching adjustment, a volatility adjustment, or a transitional measure on the risk-free rate, and the valuation of the assets in accordance with Article 75 of Directive 2009/138/EC.

Article 25

Separate calculation of the future discretionary benefits

When calculating technical provisions, insurance and reinsurance undertakings shall determine separately the value of future discretionary benefits.

Article 26

Policyholder behaviour

When determining the likelihood that policy holders will exercise contractual options, including lapses and surrenders, insurance and reinsurance undertakings shall conduct an analysis of past policyholder behaviour and a prospective assessment of expected policyholder behaviour. That analysis shall take into account all of the following:

(a)

how beneficial the exercise of the options was and will be to the policy holders under circumstances at the time of exercising the option;

(b)

the influence of past and future economic conditions;

(c)

the impact of past and future management actions;

(d)

any other circumstances that are likely to influence decisions by policyholders on whether to exercise the option.

The likelihood shall only be considered to be independent of the elements referred to in points (a) to (d) where there is empirical evidence to support such an assumption.

Subsection 2

Information underlying the calculation of best estimates

Article 27

Credibility of information

Information shall only be considered to be credible for the purposes of Article 77(2) of Directive 2009/138/EC where insurance and reinsurance undertakings provide evidence of the credibility of the information taking into account the consistency and objectivity of that information, the reliability of the source of the information and the transparency of the way in which the information is generated and processed.

Subsection 3

Cash flow projections for the calculation of the best estimate

Article 28

Cash flows

The cash flow projection used in the calculation of the best estimate shall include all of the following cash flows, to the extent that these cash flows relate to existing insurance and reinsurance contracts:

(a)

benefit payments to policy holders and beneficiaries;

(b)

payments that the insurance or reinsurance undertaking will incur in providing contractual benefits that are paid in kind;

(c)

payments of expenses as referred to in point (1) of Article 78 of Directive 2009/138/EC;

(d)

premium payments and any additional cash flows that result from those premiums;

(e)

payments between the insurance or reinsurance undertaking and intermediaries related to insurance or reinsurance obligations;

(f)

payments between the insurance or reinsurance undertaking and investment firms in relation to contracts with index-linked and unit-linked benefits;

(g)

payments for salvage and subrogation to the extent that they do not qualify as separate assets or liabilities in accordance with international accounting standards, as endorsed by the Commission in accordance with Regulation (EC) No 1606/2002;

(h)

taxation payments which are, or are expected to be, charged to policy holders or are required to settle the insurance or reinsurance obligations.

Article 29

Expected future developments in the external environment

The calculation of the best estimate shall take into account expected future developments that will have a material impact on the cash in- and out-flows required to settle the insurance and reinsurance obligations over the lifetime thereof. For that purpose future developments shall include demographic, legal, medical, technological, social, environmental and economic developments including inflation as referred to in point (2) of Article 78 of Directive 2009/138/EC.

Article 30

Uncertainty of cash flows

The cash flow projection used in the calculation of the best estimate shall, explicitly or implicitly, take account of all uncertainties in the cash flows, including all of the following characteristics:

(a)

uncertainty in the timing, frequency and severity of insured events;

(b)

uncertainty in claim amounts, including uncertainty in claims inflation, and in the period needed to settle and pay claims;

(c)

uncertainty in the amount of expenses referred to in point (1) of Article 78 of Directive 2009/138/EC;

(d)

uncertainty in expected future developments referred to in Article 29 to the extent that it is practicable;

(e)

uncertainty in policyholder behaviour;

(f)

dependency between two or more causes of uncertainty;

(g)

dependency of cash flows on circumstances prior to the date of the cash flow.

Article 31

Expenses

1.   A cash flow projection used to calculate best estimates shall take into account all of the following expenses, which relate to recognised insurance and reinsurance obligations of insurance and reinsurance undertakings and which are referred to in point (1) of Article 78 of Directive 2009/138/EC:

(a)

administrative expenses;

(b)

investment management expenses;

(c)

claims management expenses;

(d)

acquisition expenses.

The expenses referred to in points (a) to (d) shall take into account overhead expenses incurred in servicing insurance and reinsurance obligations.

2.   Overhead expenses shall be allocated in a realistic and objective manner and on a consistent basis over time to the parts of the best estimate to which they relate.

3.   Expenses in respect of reinsurance contracts and special purpose vehicles shall be taken into account in the gross calculation of the best estimate.

4.   Expenses shall be projected on the assumption that the undertaking will write new business in the future.

Article 32

Contractual options and financial guarantees

When calculating the best estimate, insurance and reinsurance undertakings shall take into account all of the following:

(a)

all financial guarantees and contractual options included in their insurance and reinsurance policies;

(b)

all factors which may affect the likelihood that policy holders will exercise contractual options or realise the value of financial guarantees.

Article 33

Currency of the obligation

The best estimate shall be calculated separately for cash flows in different currencies.

Article 34

Calculation methods

1.   The best estimate shall be calculated in a transparent manner and in such a way as to ensure that the calculation method and the results that derive from it are capable of review by a qualified expert.

2.   The choice of actuarial and statistical methods for the calculation of the best estimate shall be based on their appropriateness to reflect the risks which affect the underlying cash flows and the nature of the insurance and reinsurance obligations. The actuarial and statistical methods shall be consistent with and make use of all relevant data available for the calculation of the best estimate.

3.   Where a calculation method is based on grouped policy data, insurance and reinsurance undertakings shall ensure that the grouping of policies creates homogeneous risk groups that appropriately reflect the risks of the individual policies included in those groups.

4.   Insurance and reinsurance undertakings shall analyse the extent to which the present value of cash flows depend both on the expected outcome of future events and developments and on how the actual outcome in certain scenarios could deviate from the expected outcome.

5.   Where the present value of cash flows depends on future events and developments as referred to in paragraph 4, insurance and reinsurance undertakings shall use a method to calculate the best estimate for cash flows which reflects such dependencies.

Article 35

Homogeneous risk groups of life insurance obligations

The cash flow projections used in the calculation of best estimates for life insurance obligations shall be made separately for each policy. Where the separate calculation for each policy would be an undue burden on the insurance or reinsurance undertaking, it may carry out the projection by grouping policies, provided that the grouping complies with all of the following requirements:

(a)

there are no significant differences in the nature and complexity of the risks underlying the policies that belong to the same group;

(b)

the grouping of policies does not misrepresent the risk underlying the policies and does not misstate their expenses;

(c)

the grouping of policies is likely to give approximately the same results for the best estimate calculation as a calculation on a per policy basis, in particular in relation to financial guarantees and contractual options included in the policies.

Article 36

Non-life insurance obligations

1.   The best estimate for non-life insurance obligations shall be calculated separately for the premium provision and for the provision for claims outstanding.

2.   The premium provision shall relate to future claim events covered by insurance and reinsurance obligations falling within the contract boundary referred to in Article 18. Cash flow projections for the calculation of the premium provision shall include benefits, expenses and premiums relating to these events.

3.   The provision for claims outstanding shall relate to claim events that have already occurred, regardless of whether the claims arising from those events have been reported or not.

4.   Cash flow projections for the calculation of the provision for claims outstanding shall include benefits, expenses and premiums relating to the events referred to in paragraph 3.

Subsection 4

Risk margin

Article 37

Calculation of the risk margin

1.   The risk margin for the whole portfolio of insurance and reinsurance obligations shall be calculated using the following formula:

Formula

where:

(a)

CoC denotes the Cost-of-Capital rate;

(b)

the sum covers all integers including zero;

(c)

SCR(t) denotes the Solvency Capital Requirement referred to in Article 38(2) after t years;

(d)

r(t + 1) denotes the basic risk-free interest rate for the maturity of t + 1 years.

The basic risk-free interest rate r(t + 1) shall be chosen in accordance with the currency used for the financial statements of the insurance and reinsurance undertaking.

2.   Where insurance and reinsurance undertakings calculate their Solvency Capital Requirement using an approved internal model and determine that the model is appropriate to calculate the Solvency Capital Requirement referred to in Article 38(2) for each point in time over the lifetime of the insurance and reinsurance obligations, the insurance and reinsurance undertakings shall use the internal model to calculate the amounts SCR(t) referred to in paragraph 1.

3.   Insurance and reinsurance undertakings shall allocate the risk margin for the whole portfolio of insurance and reinsurance obligations to the lines of business referred to in Article 80 of Directive 2009/138/EC. The allocation shall adequately reflect the contributions of the lines of business to the Solvency Capital Requirement referred to in Article 38(2) over the lifetime of the whole portfolio of insurance and reinsurance obligations.

Article 38

Reference undertaking

1.   The calculation of the risk margin shall be based on all of the following assumptions:

(a)

the whole portfolio of insurance and reinsurance obligations of the insurance or reinsurance undertaking that calculates the risk margin (the original undertaking) is taken over by another insurance or reinsurance undertaking (the reference undertaking);

(b)

notwithstanding point (a), where the original undertaking simultaneously pursues both life and non-life insurance activities according to Article 73(5) of Directive 2009/138/EC, the portfolio of insurance obligations relating to life insurance activities and life reinsurance obligations and the portfolio of insurance obligations relating to non-life insurance activities and non-life reinsurance obligations are taken over separately by two different reference undertakings;

(c)

the transfer of insurance and reinsurance obligations includes any reinsurance contracts and arrangements with special purpose vehicles relating to these obligations;

(d)

the reference undertaking does not have any insurance or reinsurance obligations or own funds before the transfer takes place;

(e)

after the transfer, the reference undertaking does not assume any new insurance or reinsurance obligations;

(f)

after the transfer, the reference undertaking raises eligible own funds equal to the Solvency Capital Requirement necessary to support the insurance and reinsurance obligations over the lifetime thereof;

(g)

after the transfer, the reference undertaking has assets which amount to the sum of its Solvency Capital Requirement and of the technical provisions net of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(h)

the assets are selected in such a way that they minimise the Solvency Capital Requirement for market risk that the reference undertaking is exposed to;

(i)

the Solvency Capital Requirement of the reference undertaking captures all of the following risks:

(i)

underwriting risk with respect to the transferred business,

(ii)

where it is material, the market risk referred to in point (h), other than interest rate risk,

(iii)

credit risk with respect to reinsurance contracts, arrangements with special purpose vehicles, intermediaries, policyholders and any other material exposures which are closely related to the insurance and reinsurance obligations,

(iv)

operational risk;

(j)

the loss-absorbing capacity of technical provisions, referred to in Article 108 of Directive 2009/138/EC, in the reference undertaking corresponds for each risk to the loss-absorbing capacity of technical provisions in the original undertaking;

(k)

there is no loss-absorbing capacity of deferred taxes as referred to in Article 108 of Directive 2009/138/EC for the reference undertaking;

(l)

the reference undertaking will, subject to points (e) and (f), adopt future management actions that are consistent with the assumed future management actions, as referred to in Article 23, of the original undertaking.

2.   Over the lifetime of the insurance and reinsurance obligations, the Solvency Capital Requirement necessary to support the insurance and reinsurance obligations referred to in the first subparagraph of Article 77(5) of Directive 2009/138/EC shall be assumed to be equal to the Solvency Capital Requirement of the reference undertaking under the assumptions set out in paragraph 1.

3.   For the purposes of point (i) of paragraph 1, a risk shall be considered to be material where its impact on the calculation of the risk margin could influence the decision-making or the judgment of the users of that information, including supervisory authorities.

Article 39

Cost-of-Capital rate

The Cost-of-Capital rate referred to in Article 77(5) of Directive 2009/138/EC shall be assumed to be equal to 6 %.

Subsection 5

Calculation of technical provisions as a whole

Article 40

Circumstances in which technical provisions shall be calculated as a whole and the method to be used

1.   For the purposes of the second subparagraph of Article 77(4) of Directive 2009/138/EC, reliability shall be assessed pursuant to paragraphs 2 and 3 of this Article and technical provisions shall be valued pursuant to paragraph 4 of this Article.

2.   The replication of cash flows shall be considered to be reliable where those cash flows are replicated in amount and timing in relation to the underlying risks of those cash flows and in all possible scenarios. The following cash flows associated with insurance or reinsurance obligations cannot be reliably replicated:

(a)

cash flows associated with insurance or reinsurance obligations that depend on the likelihood that policy holders will exercise contractual options, including lapses and surrenders;

(b)

cash flows associated with insurance or reinsurance obligations that depend on the level, trend, or volatility of mortality, disability, sickness and morbidity rates;

(c)

all expenses that will be incurred in servicing insurance and reinsurance obligations.

3.   Financial instruments shall be considered to be financial instruments for which a reliable market value is observable where those financial instruments are traded on an active, deep, liquid and transparent market. Active markets shall also comply with Article 10(4).

4.   Insurance and reinsurance undertakings shall determine the value of technical provisions on the basis of the market price of the financial instruments used in the replication.

Subsection 6

Recoverables from reinsurance contracts and special purpose vehicles

Article 41

General provisions

1.   The amounts recoverable from reinsurance contracts and special purpose vehicles shall be calculated consistently with the boundaries of the insurance or reinsurance contracts to which those amounts relate.

2.   The amounts recoverable from special purpose vehicles, the amounts recoverable from finite reinsurance contracts as referred to in Article 210 of Directive 2009/138/EC and the amounts recoverable from other reinsurance contracts shall each be calculated separately. The amounts recoverable from a special purpose vehicle shall not exceed the aggregate maximum risk exposure of that special purpose vehicle to the insurance or reinsurance undertaking.

3.   For the purpose of calculating the amounts recoverable from reinsurance contracts and special purpose vehicles, cash flows shall only include payments in relation to compensation of insurance events and unsettled insurance claims. Payments in relation to other events or settled insurance claims shall be accounted for outside the amounts recoverable from reinsurance contracts and special purpose vehicles and other elements of the technical provisions. Where a deposit has been made for the cash flows, the amounts recoverable shall be adjusted accordingly to avoid a double counting of the assets and liabilities relating to the deposit.

4.   The amounts recoverable from reinsurance contracts and special purpose vehicles for non-life insurance obligations shall be calculated separately for premium provisions and provisions for claims outstanding in the following manner:

(a)

the cash flows relating to provisions for claims outstanding shall include the compensation payments relating to the claims accounted for in the gross provisions for claims outstanding of the insurance or reinsurance undertaking ceding risks;

(b)

the cash flows relating to premium provisions shall include all other payments.

5.   Where cash flows from the special purpose vehicles to the insurance or reinsurance undertaking do not directly depend on the claims against the insurance or reinsurance undertaking ceding risks, the amounts recoverable from those special purpose vehicles for future claims shall only be taken into account to the extent that it can be verified in a prudent, reliable and objective manner that the structural mismatch between claims and amounts recoverable is not material.

Article 42

Counterparty default adjustment

1.   Adjustments to take account of expected losses due to default of a counterparty referred to in Article 81 of Directive 2009/138/EC shall be calculated separately from the rest of the amounts recoverable.

2.   The adjustment to take account of expected losses due to default of a counterparty shall be calculated as the expected present value of the change in cash flows underlying the amounts recoverable from that counterparty, that would arise if the counterparty defaults, including as a result of insolvency or dispute, at a certain point in time. For that purpose, the change in cash flows shall not take into account the effect of any risk mitigating technique that mitigates the credit risk of the counterparty, other than risk mitigating techniques based on collateral holdings. The risk mitigating techniques that are not taken into account shall be separately recognised without increasing the amount recoverable from reinsurance contracts and special purpose vehicles.

3.   The calculation referred to in paragraph 2 shall take into account possible default events over the lifetime of the reinsurance contract or arrangement with the special purpose vehicle and whether and how the probability of default varies over time. It shall be carried out separately by each counterparty and for each line of business. In non-life insurance, it shall also be carried out separately for premium provisions and provisions for claims outstanding.

4.   The average loss resulting from a default of a counterparty, referred to in Article 81 of Directive 2009/138/EC, shall not be assessed at lower than 50 % of the amounts recoverable excluding the adjustment referred to in paragraph 1, unless there is a reliable basis for another assessment.

5.   The probability of default of a special purpose vehicle shall be calculated on the basis of the credit risk inherent in the assets held by the special purpose vehicle.

SECTION 4

Relevant risk-free interest rate term structure

Subsection 1

General provisions

Article 43

General provisions

The rates of the basic risk-free interest rate term structure shall meet all of the following criteria:

(a)

insurance and reinsurance undertakings are able to earn the rates in a risk-free manner in practice;

(b)

the rates are reliably determined based on financial instruments traded in a deep, liquid and transparent financial market.

The rates of the relevant risk-free interest rate term structure shall be calculated separately for each currency and maturity, based on all information and data relevant for that currency and that maturity. They shall be determined in a transparent, prudent, reliable and objective manner that is consistent over time.

Subsection 2

Basic risk free interest rate term structure

Article 44

Relevant financial instruments to derive the basic risk-free interest rates

1.   For each currency and maturity, the basic risk-free interest rates shall be derived on the basis of interest rate swap rates for interest rates of that currency, adjusted to take account of credit risk.

2.   For each currency, for maturities where interest rate swap rates are not available from deep, liquid and transparent financial markets the rates of government bonds issued in that currency, adjusted to take account of the credit risk of the government bonds, shall be used to derive the basic risk free-interest rates, provided that, such government bond rates are available from deep, liquid and transparent financial markets.

Article 45

Adjustment to swap rates for credit risk

The adjustment for credit risk referred to in Article 44(1) shall be determined in a transparent, prudent, reliable and objective manner that is consistent over time. The adjustment shall be determined on the basis of the difference between rates capturing the credit risk reflected in the floating rate of interest rate swaps and overnight indexed swap rates of the same maturity, where both rates are available from deep, liquid and transparent financial markets. The calculation of the adjustment shall be based on 50 percent of the average of that difference over a time period of one year. The adjustment shall not be lower than 10 basis points and not higher than 35 basis points.

Article 46

Extrapolation

1.   The principles applied when extrapolating the relevant risk free interest rate term structure shall be the same for all currencies. This shall also apply as regards the determination of the longest maturities for which interest rates can be observed in a deep, liquid and transparent market and the mechanism to ensure a smooth convergence to the ultimate forward rate.

2.   Where insurance and reinsurance undertakings apply Article 77d of Directive 2009/138/EC, the extrapolation shall be applied to the risk-free interest rates including the volatility adjustment referred to in that Article.

3.   Where insurance and reinsurance undertakings apply Article 77b of Directive 2009/138/EC, the extrapolation shall be based on the risk-free interest rates without a matching adjustment. The matching adjustment referred to in that Article shall be applied to the extrapolated risk-free interest rates.

Article 47

Ultimate forward rate

1.   For each currency, the ultimate forward rate referred to in paragraph 1 of Article 46 shall be stable over time and shall only change as a result of changes in long-term expectations. The methodology to derive the ultimate forward rate shall be clearly specified in order to ensure the performance of scenario calculations by insurance and reinsurance undertakings. It shall be determined in a transparent, prudent, reliable and objective manner that is consistent over time.

2.   For each currency the ultimate forward rate shall take account of expectations of the long-term real interest rate and of expected inflation, provided those expectations can be determined for that currency in a reliable manner. The ultimate forward rate shall not include a term premium to reflect the additional risk of holding long-term investments.

Article 48

Basic risk-free interest rate term structure of currencies pegged to the euro

1.   For a currency pegged to the euro, the basic risk-free interest rate term structure for the euro, adjusted for currency risk, may be used to calculate the best estimate with respect to insurance or reinsurance obligations denoted in that currency, provided that all of the following conditions are met:

(a)

the pegging ensures that the exchange rate between that currency and the euro stays within a range not wider than 20 % of the upper limit of the range;

(b)

the economic situation of the euro area and the area of that currency are sufficiently similar to ensure that interest rates for the euro and that currency develop in a similar way;

(c)

the pegging arrangement ensures that the relative changes in the exchange rate over a one-year-period do not exceed the range referred to in point (a) of this paragraph, in the event of extreme market events, that correspond to the confidence level set out in Article 101(3) of Directive 2009/138/EC;

(d)

one of the following criteria is complied with:

(i)

participation of that currency in the European Exchange Rate Mechanism (ERM II);

(ii)

existence of a decision from the Council which recognizes pegging arrangements between that currency and the euro;

(iii)

establishment of the pegging arrangement by the law of the country establishing that country's currency.

For the purpose of point (c), the financial resources of the parties that guarantee the pegging shall be taken into account.

2.   The adjustment for currency risk shall be negative and shall correspond to the cost of hedging against the risk that the value in the pegged currency of an investment denominated in euro decreases as a result of changes in the level of the exchange rate between the euro and the pegged currency. The adjustment shall be the same for all insurance and reinsurance undertakings.

Subsection 3

Volatility adjustment

Article 49

Reference portfolios

1.   The reference portfolios referred to in Article 77d(2) and (4) of Directive 2009/138/EC shall be determined in a transparent, prudent, reliable and objective manner that is consistent over time. The methods applied when determining the reference portfolios shall be the same for all currencies and countries.

2.   For each currency and each country, the assets of the reference portfolio shall be valued in accordance with Article 10(1) and shall be traded in markets that, except in periods of stressed liquidity, comply with Article 40(3). Financial instruments traded in markets that temporarily cease to comply with Article 40(3) may only be included in the portfolio where that market is expected to comply with the criteria again within a reasonable period.

3.   For each currency and each country, the reference portfolio of assets shall meet all of the following requirements:

(a)

for each currency, the assets are representative of the investments made by insurance and reinsurance undertakings in that currency to cover the best estimate for insurance and reinsurance obligations denominated in that currency; for each country, the assets are representative of the investments made by insurance and reinsurance undertakings in that country to cover the best estimate for insurance and reinsurance obligations sold in the insurance market of that country and denominated in the currency of that country;

(b)

where available the portfolio is based on relevant indices which are readily available to the public and published criteria exist for when and how the constituents of those indices will be changed;

(c)

the portfolio of assets includes all of the following assets:

bonds, securitisations and loans, including mortgage loans

equity

property

For the purposes of points (a) and (b), investments of insurance and reinsurance undertakings in collective investment undertakings and other investments packaged as funds shall be treated as investments in the underlying assets.

Article 50

Formula to calculate the spread underlying the volatility adjustment

For each currency and each country the spread referred to in Article 77d(2) and (4) of Directive 2009/138/EC shall be equal to the following:

Formula

where:

(a)

wgov denotes the ratio of the value of government bonds included in the reference portfolio of assets for that currency or country and the value of all the assets included in that reference portfolio;

(b)

Sgov denotes the average currency spread on government bonds included in the reference portfolio of assets for that currency or country;

(c)

wcorp denotes the ratio of the value of bonds other than government bonds, loans and securitisations included in the reference portfolio of assets for that currency or country and the value of all the assets included in that reference portfolio;

(d)

Scorp denotes the average currency spread on bonds other than government bonds, loans and securitisations included in the reference portfolio of assets for that currency or country.

For the purposes of this Article, ‘government bonds’ means exposures to central governments and central banks.

Article 51

Risk-corrected spread

The portion of the average currency spread that is attributable to a realistic assessment of expected losses, unexpected credit risk or any other risk referred to in Article 77d(3) and (4) of Directive 2009/138/EC shall be calculated in the same manner as the fundamental spread referred to in Article 77c (2) of Directive 2009/138/EC and Article 54 of this Regulation.

Subsection 4

Matching adjustment

Article 52

Mortality risk stress

1.   The mortality risk stress referred to in Article 77b(1)(f) of Directive 2009/138/EC shall be the more adverse of the following two scenarios in terms of its impact on basic own funds:

(a)

an instantaneous permanent increase of 15 % in the mortality rates used for the calculation of the best estimate;

(b)

an instantaneous increase of 0.15 percentage points in the mortality rates (expressed as percentages) which are used in the calculation of technical provisions to reflect the mortality experience in the following 12 months.

2.   For the purpose of paragraph 1 the increase in mortality rates shall only apply to those insurance policies for which the increase in mortality rates leads to an increase in technical provisions taking into account all of the following:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under an increase of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance obligations, the identification of the policies for which technical provisions increase under an increase of mortality rates shall apply to the underlying insurance policies only and shall be carried out in accordance with paragraph 2.

Article 53

Calculation of the matching adjustment

1.   For the purpose of the calculation referred to in Article 77c(1)(a) of Directive 2009/138/EC insurance and reinsurance undertakings shall only consider the assigned assets whose expected cash flows are required to replicate the cash flows of the portfolio of insurance and reinsurance obligations, excluding any assets in excess of that. The ‘expected cash flow’ of an asset means the cash flow of the asset adjusted to allow for the probability of default of the asset that corresponds to the element of the fundamental spread set out in Article 77c(2)(a)(i) of Directive 2009/138/EC or, where no reliable credit spread can be derived from the default statistics, the portion of the long term average of the spread over the risk-free interest rate set out in Article 77c(2)(b) and (c) of that Directive.

2.   The deduction of the fundamental spread, referred to in Article 77c(1)(b) of Directive 2009/138/EC, from the result of the calculation set out in Article 77c(1)(a) of that Directive, shall include only the portion of the fundamental spread that has not already been reflected in the adjustment to the cash flows of the assigned portfolio of assets, as set out in paragraph 1 of this Article.

Article 54

Calculation of the fundamental spread

1.   The fundamental spread referred to in Article 77c(2) shall be calculated in a transparent, prudent, reliable and objective manner that is consistent over time, based on relevant indices where available. The methods to derive fundamental spread of a bond shall be the same for each currency and each country and may be different for government bonds and for other bonds.

2.   The calculation of the credit spread referred to in Article 77c(2)(a)(i) of Directive 2009/138/EC shall be based on the assumption that in case of default 30 % of the market value can be recovered.

3.   The long-term average referred to in Article 77c(2)(b) and (c) of Directive 2009/138/EC shall be based on data relating to the last 30 years. Where a part of that data is not available, it shall be replaced by constructed data. The constructed data shall be based on the available and reliable data relating to the last 30 years. Data that is not reliable shall be replaced by constructed data using that methodology. The constructed data shall be based on prudent assumptions.

4.   The expected loss referred to in Article 77c(2)(a)(ii) of Directive 2009/138/EC shall correspond to the probability-weighted loss the insurance or reinsurance undertaking incurs where the asset is downgraded to a lower credit quality step and is replaced immediately afterwards. The calculation of the expected loss shall be based on the assumption that the replacing asset meets all of the following criteria:

(a)

the replacing asset has the same cash flow pattern as the replaced asset before downgrade;

(b)

the replacing asset belongs to the same asset class as the replaced asset;

(c)

the replacing asset has the same credit quality step as the replaced asset before downgrade or a higher one.

SECTION 5

Lines of business

Article 55

Lines of business

1.   The lines of business referred to in Article 80 of Directive 2009/138/EC shall be those set out in Annex I to this Regulation.

2.   The assignment of an insurance or reinsurance obligation to a line of business shall reflect the nature of the risks relating to the obligation. The legal form of the obligation shall not necessarily be determinative of the nature of the risk.

3.   Provided that the technical basis is consistent with the nature of the risks relating to the obligation, obligations of health insurance pursued on a similar technical basis to that of life insurance shall be assigned to the lines of business for life insurance and obligations of health insurance pursued on a similar technical basis to that of non-life insurance shall be assigned to the lines of business for non-life insurance.

4.   Where the insurance obligations arising from the operations referred to in Article 2(3)(b) of Directive 2009/138/EC cannot clearly be assigned to the lines of business set out in Annex I to this Regulation on the basis of their nature, they shall be included in line of business 32 as set out in that Annex.

5.   Where an insurance or reinsurance contract covers risks across life and non-life insurance, the insurance or reinsurance obligations shall be unbundled into their life and non-life parts.

6.   Where an insurance or reinsurance contract covers risks across the lines of business as set out in Annex I to this Regulation, the insurance or reinsurance obligations shall, where possible, be unbundled into the appropriate lines of business.

7.   Where an insurance or reinsurance contract includes health insurance or reinsurance obligations and other insurance or reinsurance obligations, those obligations shall, where possible, be unbundled.

SECTION 6

Proportionality and simplifications

Article 56

Proportionality

1.   Insurance and reinsurance undertakings shall use methods to calculate technical provisions which are proportionate to the nature, scale and complexity of the risks underlying their insurance and reinsurance obligations.

2.   In determining whether a method of calculating technical provisions is proportionate, insurance and reinsurance undertakings shall carry out an assessment which includes:

(a)

an assessment of the nature, scale and complexity of the risks underlying their insurance and reinsurance obligations;

(b)

an evaluation in qualitative or quantitative terms of the error introduced in the results of the method due to any deviation between the following:

(i)

the assumptions underlying the method in relation to the risks;

(ii)

the results of the assessment referred to in point (a).

3.   The assessment referred to in point (a) of paragraph 2 shall include all risks which affect the amount, timing or value of the cash in- and out-flows required to settle the insurance and reinsurance obligations over their lifetime. For the purpose of the calculation of the risk margin, the assessment shall include all risks referred to in Article 38(1)(i) over the lifetime of the underlying insurance and reinsurance obligations. The assessment shall be restricted to the risks that are relevant to that part of the calculation of technical provisions to which the method is applied.

4.   A method shall be considered to be disproportionate to the nature, scale and complexity of the risks if the error referred to in point (b) of paragraph 2 leads to a misstatement of technical provisions or their components that could influence the decisions-making or judgment of the intended user of the information relating to the value of technical provisions, unless one of the following conditions are met:

(a)

no other method with a smaller error is available and the method is not likely to result in an underestimation of the amount of technical provisions;

(b)

the method leads to an amount of technical provisions of the insurance or reinsurance undertaking that is higher than the amount that would result from using a proportionate method and the method does not lead to an underestimation of the risk inherent in the insurance and reinsurance obligations that it is applied to.

Article 57

Simplified calculation of recoverables from reinsurance contracts and special purpose vehicles

1.   Without prejudice to Article 56 of this Regulation, insurance and reinsurance undertakings may calculate the amounts recoverable from reinsurance contracts and special purpose vehicles before adjusting those amounts to take account of the expected loss due to default of the counterparty as the difference between the following estimates:

(a)

the best estimate calculated gross as referred to in Article 77(2) of Directive 2009/138/EC;

(b)

the best estimate, after taking into account the amounts recoverable from reinsurance contracts and special purpose vehicles and without an adjustment for the expected loss due to default of the counterparty (unadjusted net best estimate) calculated in accordance with paragraph 2.

2.   Insurance and reinsurance undertakings may use methods to derive the unadjusted net best estimate from the gross best estimate without an explicit projection of the cash flows underlying the amounts recoverable from reinsurance contracts and special purpose vehicles. Insurance and reinsurance undertakings shall calculate the unadjusted net best estimate based on homogeneous risk groups. Each of those homogeneous risk groups shall cover not more than one reinsurance contract or special purpose vehicles unless those reinsurance contracts or special purpose vehicles provide a transfer of homogeneous risks.

Article 58

Simplified calculation of the risk margin

Without prejudice to Article 56, insurance and reinsurance undertakings may use simplified methods when they calculate the risk margin, including one or more of the following:

(a)

methods which use approximations of the amounts denoted by the terms SCR(t) referred to in Article 37(1);

(b)

methods which approximate the discounted sum of the amounts denoted by the terms SCR(t) as referred to in Article 37(1) without calculating each of those amounts separately.

Article 59

Calculations of the risk margin during the financial year

Without prejudice to Article 56, insurance and reinsurance undertakings may derive the risk margin for calculations that need to be performed quarterly from the result of an earlier calculation of the risk margin without an explicit calculation of the formula referred to in Article 37(1).

Article 60

Simplified calculation of the best estimate for insurance obligations with premium adjustment mechanism

Without prejudice to Article 56, insurance and reinsurance undertakings may calculate the best estimate of life insurance obligations with an arrangement by which the insurance undertaking has the right or the obligation to adjust the future premiums of an insurance contract to reflect material changes in the expected level of claims and expenses (premium adjustment mechanism) using cash flow projections which assume that changes in the level of claims and expenses occur simultaneously with premium adjustments and which result in a net cash flow that is equal to zero, provided that all of the following conditions are met:

(a)

the premium adjustment mechanism fully compensates the insurance undertaking for any increase in the level of claims and expenses in a timely manner;

(b)

the calculation does not result in an underestimation of the best estimate;

(c)

the calculation does not result in an underestimation of the risk inherent in those insurance obligations.

Article 61

Simplified calculation of the counterparty default adjustment

Without prejudice to Article 56 of this Regulation, insurance and reinsurance undertakings may calculate the adjustment for expected losses due to default of the counterparty, referred to in Article 81 of Directive 2009/138/EC, for a specific counterparty and homogeneous risk group to be equal as follows:

Formula

where:

(a)

PD denotes the probability of default of that counterparty during the following 12 months;

(b)

Durmod denotes the modified duration of the amounts recoverable from reinsurance contracts with that counterparty in relation to that homogeneous risk group;

(c)

BErec denotes the amounts recoverable from reinsurance contracts with that counterparty in relation to that homogeneous risk group.

CHAPTER IV

OWN FUNDS

SECTION 1

Determination of own funds

Subsection 1

Supervisory approval of ancillary own funds

Article 62

Assessment of the application

1.   Supervisory authorities shall take all of the following into account for the purposes of the assessment referred to in Article 90 (4) of Directive 2009/138/EC:

(a)

the legal effectiveness and enforceability of the terms of the commitment in all relevant jurisdictions;

(b)

the contractual terms of the arrangement that the insurance or reinsurance undertaking has entered into, or will enter into, with the counterparties to provide funds;

(c)

where relevant, the insurance or reinsurance undertaking's memorandum and articles of association or statutes;

(d)

whether the insurance or reinsurance undertaking has processes in place to inform the supervisory authorities of any future changes, which may have the effect of reducing the loss-absorbency of the ancillary own-fund item, to any of the following:

(i)

the structure or contractual terms of the arrangement;

(ii)

the status of the counterparties concerned;

(iii)

the recoverability of the ancillary own funds item.

2.   Supervisory authorities shall also assess whether Article 90 of Directive 2009/138/EC is complied with taking into account the range of circumstances under which the item can be called up to absorb losses.

3.   Where the insurance or reinsurance undertaking is seeking approval of a method by which to determine the amount of each ancillary own-fund item, the supervisory authorities shall assess whether the undertaking's process for regularly validating the method is appropriate to ensure that the results of the method reflect the loss-absorbency of the item on an ongoing basis.

4.   In addition to the requirements set out in paragraphs 1 to 3, supervisory authorities shall assess the application for approval of ancillary own funds on the basis of the criteria set out in Articles 63, 64 and 65.

Article 63

Assessment of the application — Status of the counterparties

1.   Supervisory authorities shall take all of the following into account for the purposes of the assessment of the counterparties' ability to pay referred to in Article 90(4)(a) of Directive 2009/138/EC:

(a)

the risk of default of the counterparties;

(b)

the risk that default arises from a delay in the counterparties satisfying their commitments under the ancillary own funds item.

2.   In relation to paragraph 1(a), the supervisory authorities shall assess the risk of default of the counterparties by examining the probability of default of the counterparties and the loss given default, taking into account all of the following criteria:

(a)

the credit standing of the counterparties, provided that this appropriately reflects the counterparties' ability to satisfy their commitments under the ancillary own funds item;

(b)

whether there are any current or foreseeable practical or legal impediments to the counterparties' satisfaction of their commitments under the ancillary own funds item;

(c)

whether the counterparties are subject to legal or regulatory requirements that reduce the counterparties' ability to satisfy their commitments under the ancillary own funds item;

(d)

whether the legal form of the counterparties prejudice the counterparties' satisfaction of their commitments under the ancillary own funds item;

(e)

whether the counterparties are subject to other exposures which reduce the counterparties' ability to satisfy their commitments under the ancillary own funds item;

(f)

whether, in relation to their commitment under the ancillary own fund item, the contractual terms of the arrangement under any applicable law are such that the counterparties have rights to set-off amounts they owe against any amounts owed to them by the insurance or reinsurance undertaking.

3.   In relation to paragraph 1(b), the supervisory authorities shall assess the liquidity position of the counterparties, taking into account all of the following:

(a)

whether there are any current or foreseeable practical or legal impediments to the counterparties' ability to promptly satisfy their commitments under the ancillary own funds item;

(b)

whether the counterparties are subject to legal or regulatory requirements that may reduce the counterparties' ability to promptly satisfy their commitments under the ancillary own funds item;

(c)

whether the legal form of the counterparties prejudices the counterparties' prompt satisfaction of their commitments under the ancillary own funds item.

4.   Supervisory authorities shall take all of the following into account for the purposes of the assessment of the counterparties' willingness to pay referred to in Article 90(4)(a) of Directive 2009/138/EC:

(a)

the range of circumstances under which the ancillary own funds item can be called up to absorb losses;

(b)

whether incentives or disincentives exist which may affect the counterparties' willingness to satisfy their commitments under the ancillary own funds item;

(c)

whether previous transactions between the counterparties and the insurance or reinsurance undertaking, including the counterparties' previous satisfaction of their commitments under ancillary own funds items, give an indication as to the counterparties' willingness to satisfy their current commitments under the ancillary own funds item.

5.   The supervisory authorities shall, in assessing the counterparties' ability and willingness to pay, consider any other factors relevant to the status of the counterparties including, where relevant, the insurance or reinsurance undertaking's business model.

6.   Where an ancillary own-fund item concerns a group of counterparties, supervisory authorities and insurance and reinsurance undertakings may assess the status of the group of counterparties as though it were a single counterparty provided that all of the following conditions are fulfilled:

(a)

the counterparties are individually non-material;

(b)

the counterparties included in that group are sufficiently homogeneous;

(c)

the assessment of a group of counterparties does not overestimate the ability and willingness to pay of the counterparties included in that group.

7.   A counterparty shall be considered as material where the status of that single counterparty is likely to have a significant effect on the assessment of the group of counterparties' ability and willingness to pay.

Article 64

Assessment of the application — Recoverability of the funds

Supervisory authorities shall take all of the following into account for the purposes of the assessment of the recoverability of the funds referred to in Article 90(4)(b) of Directive 2009/138/EC:

(a)

whether the recoverability of the funds is increased as a result of the availability of collateral or an analogous arrangement that complies with Articles 209 to 214;

(b)

whether there is any current or foreseeable practical or legal impediment to the recoverability of the funds;

(c)

whether the recoverability of the funds is subject to legal or regulatory requirements;

(d)

the ability of the insurance or reinsurance undertaking to take action to enforce the counterparties' satisfaction of their commitments under the ancillary own funds item.

Article 65

Assessment of the application — Information on the outcome of past calls

Supervisory authorities shall take all of the following into account for the purposes of the assessment of the information on the outcome of past calls referred to in Article 90(4)(c) of Directive 2009/138/EC:

(a)

whether the insurance or reinsurance undertaking has made past calls from the same or similar counterparties under the same or similar circumstances;

(b)

whether that information is relevant and reliable as regards the expected outcome of future calls.

Article 66

Specification of amount relating to an unlimited amount of ancillary own funds

1.   The supervisory authorities shall not approve an unlimited amount of ancillary own funds.

2.   Where the supervisory authorities approve an amount of ancillary own funds, the decision of the supervisory authorities shall specify whether the amount that has been approved is the amount for which the insurance or reinsurance undertaking has applied or a lower amount.

Article 67

Specification of amount and timing relating to the approval of a method

Where the supervisory authorities approve a method to determine the amount of each ancillary own fund item, the supervisory authorities' decision shall set out all of the following:

(a)

the initial amount of the ancillary own funds item that has been calculated using that method at the date the approval is granted;

(b)

the minimum frequency of recalculation of the amount of ancillary own funds item using that method where it is more frequent than annual, and the reasons for that frequency;

(c)

the time period for which the calculation of the ancillary own funds item using that method is granted.

Subsection 2

Own funds treatment of participations

Article 68

Treatment of participations in the determination of basic own funds

1.   For the purpose of determining the basic own funds of insurance and reinsurance undertakings, basic own funds as referred to in Article 88 of Directive 2009/138/EC shall be reduced by the full value of participations, as referred to in Article 92(2) of that Directive, in a financial and credit institution that exceeds 10 % of items included in points (a) (i), (ii), (iv) and (vi) of Article 69.

2.   For the purpose of determining the basic own funds of insurance and reinsurance undertakings, basic own funds as referred to in Article 88 of Directive 2009/138/EC shall be reduced by the part of the value of all participations, as referred to in Article 92(2) of that Directive, in financial and credit institutions, other than participations referred to in paragraph 1, that exceeds 10 % of items included in points (a) (i), (ii), (iv) and (vi) of Article 69.

3.   Notwithstanding paragraphs 1 and 2, insurance and reinsurance undertakings shall not deduct strategic participations as referred to in Article 171 which are included in the calculation of the group solvency on the basis of method 1 as set out in Annex I to Directive 2002/87/EC.

4.   The deductions set out in paragraph 2 shall be applied on a pro-rata basis to all participations referred to in that paragraph.

5.   The deductions set out in paragraphs 1 and 2 shall be made from the corresponding tier in which the participation has increased the own funds of the related undertaking as follows:

(a)

holdings of Common Equity Tier 1 items of financial and credit institutions shall be deducted from the items included in points (a) (i), (ii), (iv) and (vi) of Article 69;

(b)

holdings of Additional Tier 1 instruments of financial and credit institutions shall be deducted from the items included in points (a)(iii) and (v) and point (b) of Article 69;

(c)

holdings of Tier 2 instruments of financial and credit institutions shall be deducted from the basic own-fund items included in Article 72.

SECTION 2

Classification of own funds

Article 69

Tier 1 — List of own-fund items

The following basic own-fund items shall be deemed to substantially possess the characteristics set out in Article 93(1)(a) and (b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive, and shall be classified as Tier 1, where those items display all of the features set out in Article 71:

(a)

the part of excess of assets over liabilities, valued in accordance with Article 75 and Section 2 of Chapter VI of Directive 2009/138/EC, comprising the following items:

(i)

paid-in ordinary share capital and the related share premium account;

(ii)

paid-in initial funds, members' contributions or the equivalent basic own-fund item for mutual and mutual-type undertakings;

(iii)

paid-in subordinated mutual member accounts;

(iv)

surplus funds that are not considered as insurance and reinsurance liabilities in accordance with Article 91(2) of Directive 2009/138/EC;

(v)

paid-in preference shares and the related share premium account;

(vi)

a reconciliation reserve;

(b)

paid-in subordinated liabilities valued in accordance with Article 75 of Directive 2009/138/EC.

Article 70

Reconciliation Reserve

1.   The reconciliation reserve referred to in point (a)(vi) of Article 69 equals the total excess of assets over liabilities reduced by all of the following:

(a)

the amount of own shares held by the insurance and reinsurance undertaking;

(b)

foreseeable dividends, distributions and charges;

(c)

the basic own-fund items included in points (a)(i) to (v) of Article 69, Article 72(a) and Article 76(a);

(d)

the basic own-fund items not included in points (a)(i) to (v) of Article 69, point (a) of Article 72 and point (a) of Article 76, which have been approved by the supervisory authority in accordance with Article 79;

(e)

the restricted own-fund items that meet one of the following requirements:

(i)

exceed the notional Solvency Capital Requirement in the case of matching adjustment portfolios and ring-fenced funds determined in accordance with Article 81(1);

(ii)

that are excluded in accordance with Article 81(2);

(f)

the amount of participations held in financial and credit institutions as referred to in Article 92(2) of Directive 2009/138/EC deducted in accordance with Article 68, to the extent that this is not already included in points (a) to (e).

2.   The excess of assets over liabilities referred to in paragraph 1 includes the amount that corresponds to the expected profit included in future premiums set out in paragraph 2 of Article 260.

3.   The determination of whether, and to what extent, the reconciliation reserve displays the features set out in Article 71 shall not amount to an assessment of the features of the assets and liabilities that are included in computing the excess of assets over liabilities or the underlying items in the undertakings' financial statements.

Article 71

Tier 1 — Features determining classification

1.   The features referred to in Article 69 shall be the following:

(a)

the basic own fund item:

(i)

in the case of items referred to in points (a) (i) and (ii) of Article 69, ranks after all other claims in the event of winding-up proceedings regarding the insurance or reinsurance undertaking;

(ii)

in the case of items referred to in points (a)(iii) and (v) and point (b) of Article 69, ranks to the same degree as, or ahead of, the items referred to in points (a)(i) and (ii) of Article 69, but after items listed in Articles 72 and 76 that display the features set out in Article 73 and 77 respectively and after the claims of all policy holders and beneficiaries and non-subordinated creditors;

(b)

the basic own-fund item does not include features which may cause the insolvency of the insurance or reinsurance undertaking or may accelerate the process of the undertaking becoming insolvent;

(c)

the basic own fund item is immediately available to absorb losses;

(d)

the basic own-fund item absorbs losses at least once there is non-compliance with the Solvency Capital Requirement and does not hinder the recapitalisation of the insurance or reinsurance undertaking;

(e)

the basic own-fund item, in the case of items referred to in points (a)(iii) and (v) and point (b) of Article 69, possesses one of the following principal loss absorbency mechanisms to be triggered at the trigger event specified in paragraph 8:

(i)

the nominal or principal amount of the basic own-fund item is written down as set out in paragraph 5;

(ii)

the basic own-fund item automatically converts into a basic own-fund item listed in point (a)(i) or (ii) of Article 69 as set out in paragraph 6;

(iii)

a principal loss absorbency mechanism that achieves an equivalent outcome to the principal loss absorbency mechanisms set out in points (i) or (ii);

(f)

the basic own-fund item meets one of the following criteria:

(i)

in the case of items referred to in points (a)(i) and (ii) of Article 69, the item is undated or, where the insurance or reinsurance undertaking has a fixed maturity, is of the same maturity as the undertaking;

(ii)

in the case of items referred to in points (a)(iii) and (v) and point (b) of Article 69, the item is undated; the first contractual opportunity to repay or redeem the basic own-fund item does not occur before 5 years from the date of issuance;

(g)

the basic own-fund item referred to in points (a)(iii) and (v) and point (b) of Article 69 may only allow for repayment or redemption of that item between 5 and 10 years after the date of issuance where the undertaking's Solvency Capital Requirement is exceeded by an appropriate margin taking into account the solvency position of the undertaking including the undertaking's medium-term capital management plan;

(h)

the basic own-fund item, in the case of items referred to in points (a)(i), (ii), (iii) and (v) and point (b) of Article 69, is only repayable or redeemable at the option of the insurance or reinsurance undertaking and the repayment or redemption of the basic own-fund item is subject to prior supervisory approval;

(i)

the basic own-fund item, in the case of items referred to in points (a)(i), (ii), (iii) and (v) and point (b) of Article 69, does not include any incentives to repay or redeem that item that increase the likelihood that an insurance or reinsurance undertaking will repay or redeem that basic own-fund item where it has the option to do so;

(j)

the basic own-fund item, in the case of items referred to in points (a)(i), (ii), (iii) and (v) and point (b) of Article 69, provides for the suspension of repayment or redemption of that item where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the repayment or redemption would not lead to non-compliance with the Solvency Capital Requirement;

(k)

notwithstanding point (j), the basic own-fund item may only allow for repayment or redemption of that item where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance, where all of the following conditions are met:

(i)

the supervisory authority has exceptionally waived the suspension of repayment or redemption of that item;

(ii)

the item is exchanged for or converted into another Tier 1 own-fund item of at least the same quality;

(iii)

the Minimum Capital Requirement is complied with after the repayment or redemption.

(l)

the basic own-fund item meets one of the following criteria:

(i)

in the case of items referred to in points (a)(i) and (ii) of Article 69(1), either the legal or contractual arrangements governing the basic own-fund item or national legislation allow for the cancellation of distributions in relation to that item where there is non-compliance with the Solvency Capital Requirement or the distribution would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the distribution would not lead to non-compliance with the Solvency Capital Requirement;

(ii)

in the case of items referred to in points (a)(iii) and (v) and point (b) of Article 69 the terms of the contractual arrangement governing the basic own-fund item provide for the cancellation of distributions in relation to that item where there is non-compliance with the Solvency Capital Requirement or the distribution would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the distribution would not lead to non-compliance with the Solvency Capital Requirement;

(m)

the basic own-fund item may only allow for a distribution to be made where there is non-compliance with the Solvency Capital Requirement or the distribution on a basic-own fund item would lead to such non-compliance, where all of the following conditions are met:

(i)

the supervisory authority has exceptionally waived the cancellation of distributions;

(ii)

the distribution does not further weaken the solvency position of the insurance or reinsurance undertaking;

(iii)

the Minimum Capital Requirement is complied with after the distribution is made.

(n)

the basic own fund item, in the case of items referred to in points (a)(i), (ii), (iii) and (v) and point (b) of Article 69, provides the insurance or reinsurance undertaking with full flexibility over the distributions on the basic own-fund item;

(o)

the basic own-fund item is free from encumbrances and is not connected with any other transaction, which when considered with the basic own-fund item, could result in that basic own-fund item not complying with Article 94(1) of Directive 2009/138/EC.

2.   For the purposes of this Article, the exchange or conversion of a basic own-fund item into another Tier 1 basic own-fund item or the repayment or redemption of a Tier 1 own-fund item out of the proceeds of a new basic own-fund item of at least the same quality shall not be deemed to be a repayment or redemption, provided that the exchange, conversion, repayment or redemption is subject to the approval of the supervisory authority.

3.   For the purposes of point (n) of paragraph 1, in the case of basic own-fund items referred to in points (a)(i) and (ii) of Article 69, full flexibility over the distributions is provided where all of the following conditions are met:

(a)

there is no preferential distribution treatment regarding the order of distribution payments and the terms of the contractual arrangement governing the own-fund item do not provide preferential rights to the payment of distributions;

(b)

distributions are paid out of distributable items;

(c)

the level of distributions is not determined on the basis of the amount for which the own-fund item was purchased at issuance and there is no cap or other restriction on the maximum level of distribution;

(d)

notwithstanding point (c), in the case of instruments issued by mutual and mutual-type undertakings, a cap or other restriction on the maximum level of distribution may be set, provided that cap or other restriction is not an event linked to distributions being made, or not made, on other own fund items;

(e)

there is no obligation for an insurance or reinsurance undertaking to make distributions;

(f)

non-payment of distributions does not constitute an event of default of the insurance or reinsurance undertaking;

(g)

the cancellation of distributions imposes no restrictions on the insurance or reinsurance undertaking.

4.   For the purposes of point (n) of paragraph 1, in the case of basic own-fund items referred to in points (a)(iii) and (a)(v) and point (b) of Article 69 full flexibility over the distributions is provided where all of the following conditions are met:

(a)

distributions are paid out of distributable items;

(b)

insurance and reinsurance undertakings have full discretion at all times to cancel distributions in relation to the own-fund item for an unlimited period and on a non-cumulative basis and the undertakings may use the cancelled payments without restriction to meet its obligations as they fall due;

(c)

there is no obligation to substitute the distribution by a payment in any other form;

(d)

there is no obligation to make distributions in the event of a distribution being made on another own fund item;

(e)

non-payment of distributions does not constitute an event of default of the insurance or reinsurance undertaking;

(f)

the cancellation of distributions imposes no restrictions on the insurance or reinsurance undertaking.

5.   For the purposes of paragraph (1)(e)(i), the nominal or principal amount of the basic own-fund item shall be written down in such a way that all of the following are reduced:

(a)

the claim of the holder of that item in the event of winding-up proceedings;

(b)

the amount required to be paid on repayment or redemption of that item;

(c)

the distributions paid on that item.

6.   For the purposes of paragraph (1)(e)(ii), the provisions governing the conversion into basic own-fund items listed in points (a) (i) or (ii) of Article 69 shall specify either of the following:

(a)

the rate of conversion and a limit on the permitted amount of conversion;

(b)

a range within which the instruments will convert into the basic own funds item listed in points (a)(i) or (ii) of Article 69.

7.   The nominal or principal amount of the basic own-fund item shall absorb losses at the trigger event. Loss absorbency resulting from the cancellation of, or a reduction in, distributions shall not be deemed to be sufficient to be considered to be a principal loss absorbency mechanism in accordance with paragraph (1)(e).

8.   The trigger event referred to in paragraph (1)(e) shall be significant non-compliance with the Solvency Capital Requirement.

For the purposes of this paragraph, non-compliance with the Solvency Capital Requirement shall be considered significant where any of the following conditions is met:

(a)

the amount of own-fund items eligible to cover the Solvency Capital Requirement is equal to or less than the 75 % of the Solvency Capital Requirement;

(b)

the amount of own-fund items eligible to cover the Minimum Capital Requirement is equal to or less than Minimum Capital Requirement;

(c)

compliance with the Solvency Capital Requirement is not re-established within a period of three months of the date when non-compliance with the Solvency Capital Requirement was first observed.

Insurance and reinsurance undertakings may specify, in the provisions governing the instrument, one or more trigger events in addition to the events referred to in points (a) to (c).

9.   For the purposes of points (d), (j) and (l) of paragraph 1, references to the Solvency Capital Requirement shall be read as references to the Minimum Capital Requirement where non-compliance with the Minimum Capital Requirement occurs before non-compliance with the Solvency Capital Requirement.

Article 72

Tier 2 Basic own-funds — List of own-fund items

The following basic own-fund items shall be deemed to substantially possess the characteristics set out in Article 93(1)(b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive, and shall be classified as Tier 2 where the following items display all of the features set out in Article 73:

(a)

the part excess of assets over liabilities, valued in accordance with Article 75 and Section 2 of Chapter VI of Directive 2009/138/EC, comprising the following items:

(i)

ordinary share capital and the related share premium account;

(ii)

initial funds, members' contributions or the equivalent basic own-fund item for mutual and mutual-type undertakings;

(iii)

subordinated mutual member accounts;

(iv)

preference shares and the related share premium account;

(b)

subordinated liabilities valued in accordance with Article 75 of Directive 2009/138/EC.

Article 73

Tier 2 Basic own-funds — Features determining classification

1.   The features referred to in Article 72 shall be the following:

(a)

the basic own-fund item ranks after the claims of all policy holders and beneficiaries and non-subordinated creditors;

(b)

the basic own-fund item does not include features which may cause the insolvency of the insurance or reinsurance undertaking or may accelerate the process of the undertaking becoming insolvent;

(c)

the basic own-fund item is undated or has an original maturity of at least 10 years; the first contractual opportunity to repay or redeem the basic own-fund item does not occur before 5 years from the date of issuance;

(d)

the basic own-fund item is only repayable or redeemable at the option of the insurance or reinsurance undertaking and the repayment or redemption of the basic own-fund item is subject to prior supervisory approval;

(e)

the basic own-fund item may include limited incentives to repay or redeem that basic own-fund item, provided that these do not occur before 10 years from the date of issuance;

(f)

the basic own-fund item provides for the suspension of repayment or redemption of that item where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the repayment or redemption would not lead to non-compliance with the Solvency Capital Requirement;

(g)

the basic own-fund item meets one of the following criteria:

(i)

in the case of items referred to in points (a)(i) and (ii) of Article 72, either the legal or contractual arrangements governing the basic own-fund item or national legislation allow for the distributions in relation to that item to be deferred where there is non-compliance with the Solvency Capital Requirement or the distribution would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the distribution would not lead to non-compliance with the Solvency Capital Requirement;

(ii)

in the case of items referred to in points (a)(iii) and (iv) and point (b) of Article 72 the terms of the contractual arrangement governing the basic own-fund item provide for the distributions in relation to that item to be deferred where there is non-compliance with the Solvency Capital Requirement or the distribution would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the distribution would not lead to non-compliance with the Solvency Capital Requirement;

(h)

the basic own-fund item may only allow for a distribution to be made where there is non-compliance with the Solvency Capital Requirement or the distribution on a basic-own fund item would lead to such non-compliance, where all of the following conditions are met:

(i)

the supervisory authority has exceptionally waived the deferral of distributions;

(ii)

the payment does not further weaken the solvency position of the insurance or reinsurance undertaking;

(iii)

the Minimum Capital Requirement is complied with after the distribution is made.

(i)

the basic own-fund item is free from encumbrances and is not connected with any other transaction, which when considered with the basic own-fund item, could result in that basic own-fund item not complying with the first subparagraph of Article 94(2) of Directive 2009/138/EC.

(j)

the basic own-fund item displays the features set out in Article 71 that are relevant for basic own-fund items referred to in points (a)(iii), (v) and (b) of Article 69, but exceeds the limit set out in Article 82(3).

Notwithstanding point (f), the basic own-fund item may only allow for the repayment or redemption of that item where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance, where all of the following conditions are met:

(i)

the supervisory authority has exceptionally waived the suspension of repayment or redemption of that item;

(ii)

the item is exchanged for or converted into another Tier 1 or Tier 2 basic own-fund item of at least the same quality;

(iii)

the Minimum Capital Requirement is complied with after the repayment or redemption.

2.   For the purposes of this Article, the exchange or conversion of a basic own-fund item into another Tier 1 or Tier 2 basic own-fund item or the repayment or redemption of a Tier 2 basic own-fund item out of the proceeds of a new basic own-fund item of at least the same quality shall not be deemed to be a repayment or redemption, provided that the exchange, conversion, repayment or redemption is subject to the approval of the supervisory authority.

3.   For the purposes of points (f) and (g) of paragraph 1, references to the Solvency Capital Requirement shall be read as references to the Minimum Capital Requirement where non-compliance with the Minimum Capital Requirement occurs before non-compliance with the Solvency Capital Requirement.

4.   For the purposes of point (e) of paragraph 1, undertakings shall consider incentives to redeem in the form of an interest rate step-up associated with a call option as limited where the step-up takes the form of a single increase in the coupon rate and results in an increase in the initial rate that is no greater than the higher of the following amounts:

(a)

100 basis points, less the swap spread between the initial index basis and the stepped-up index basis;

(b)

50 % of the initial credit spread, less the swap spread between the initial index basis and the stepped-up index basis.

Article 74

Tier 2 Ancillary own-funds — List of own-fund items

Without prejudice to Article 96 of Directive 2009/138/EC, the following ancillary own-fund items shall be deemed to substantially possess the characteristics set out in Article 93(1)(b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive, and shall be classified as Tier 2, where the following items display all of the features set out in Article 75:

(a)

unpaid and uncalled ordinary share capital callable on demand;

(b)

unpaid and uncalled initial funds, members' contributions or the equivalent basic own-fund item for mutual and mutual-type undertakings, callable on demand;

(c)

unpaid and uncalled preference shares callable on demand;

(d)

a legally binding commitment to subscribe and pay for subordinated liabilities on demand;

(e)

letters of credit and guarantees which are held in trust for the benefit of insurance creditors by an independent trustee and provided by credit institutions authorised in accordance with Article 8 of Directive 2013/36/EU;

(f)

letters of credit and guarantees provided that the items can be called up on demand and are clear of encumbrances;

(g)

any future claims which mutual or mutual-type associations of shipowners with variable contributions solely insuring risks listed in classes 6, 12 and 17 in Part A of Annex 1 of Directive 2009/138/EC may have against their members by way of a call for supplementary contributions, within the following 12 months;

(h)

any future claims which mutual or mutual-type associations may have against their members by way of a call for supplementary contributions, within the following 12 months, provided that a call can be made on demand and is clear of encumbrances;

(i)

other legally binding commitments received by the insurance or reinsurance undertaking, provided that the item can be called up on demand and is clear of encumbrances.

Article 75

Tier 2 Ancillary own-funds — Features determining classification

In order to be classified as Tier 2, the ancillary own-fund items listed in Article 74 shall display the features of a basic own fund item classified in Tier 1 in accordance with Articles 69 and 71 once that item has been called up and paid in.

Article 76

Tier 3 Basic own-funds– List of own-fund items

The following basic own-fund items shall be deemed to possess the characteristics set out in Article 93(1)(b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive, and shall be classified as Tier 3 where the following items display all of the features set out in Article 77:

(a)

the part excess of assets over liabilities, valued in accordance with Sections 1 and 2 of Chapter VI of Directive 2009/138/EC, comprising the following items:

(i)

subordinated mutual member accounts;

(ii)

preference shares and the related share premium account;

(iii)

an amount equal to the value of net deferred tax assets;

(b)

subordinated liabilities valued in accordance with Article 75 of Directive 2009/138/EC.

Article 77

Tier 3 Basic own-funds– Features determining classification

1.   The features referred to in Article 76 shall be the following:

(a)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, ranks after the claims of all policy holders and beneficiaries and non-subordinated creditors;

(b)

the basic own-fund item does not include features which may cause the insolvency of the insurance or reinsurance undertaking or may accelerate the process of the undertaking becoming insolvent;

(c)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, is undated or has an original maturity of at least 5 years, where the maturity date is the first contractual opportunity to repay or redeem the basic own-fund item;

(d)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, is only repayable or redeemable at the option of the insurance or reinsurance undertaking and the repayment or redemption of the basic own-fund item is subject to prior supervisory approval;

(e)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, may include limited incentives to repay or redeem that basic own-fund item;

(f)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, provides for the suspension of repayment or redemption where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance until the undertaking complies with the Solvency Capital Requirement and the repayment or redemption would not lead to non-compliance with the Solvency Capital Requirement;

(g)

the basic own-fund item, in the case of items referred to in points (a)(i) and (ii) and point (b) of Article 76, provides for the deferral of distributions where there is non-compliance with the Minimum Capital Requirement or the distribution would lead to such non-compliance until the undertaking complies with the Minimum Capital Requirement and the distribution would not lead to non-compliance with the Minimum Capital Requirement;

(h)

the basic own-fund item is free from encumbrances and is not connected with any other transaction, which could undermine the features that the item is required to possess in accordance with this Article.

Notwithstanding point (f), the basic own-fund item may only allow for the repayment or redemption of that item where there is non-compliance with the Solvency Capital Requirement or repayment or redemption would lead to such non-compliance, where all the following conditions are met:

(i)

the supervisory authority has exceptionally waived the suspension of repayment or redemption of that item;

(ii)

the item is exchanged for or converted into another Tier 1, Tier 2 basic own-fund item or Tier 3 basic own-fund item of at least the same quality;

(iii)

the Minimum Capital Requirement is complied with after the repayment or redemption.

2.   For the purposes of this Article, the exchange or conversion of a basic own-fund item into another Tier 1, Tier 2 basic own-fund item or Tier 3 basic own-fund item or the repayment or redemption of a Tier 3 basic own-fund item out of the proceeds of a new basic own-fund item of at least the same quality shall not be deemed to be a repayment or redemption, provided that the exchange, conversion, repayment or redemption is subject to the approval of the supervisory authority.

3.   For the purposes of point (f) of paragraph 1, references to the Solvency Capital Requirement shall be read as references to the Minimum Capital Requirement where non-compliance with the Minimum Capital Requirement occurs before non-compliance with the Solvency Capital Requirement.

4.   For the purposes of point (e) of paragraph 1, undertakings shall consider incentives to redeem in the form of an interest rate step-up associated with a call option as limited where the step-up takes the form of a single increase in the coupon rate and results in an increase in the initial rate that is no greater than the higher of the following amounts:

(a)

100 basis points, less the swap spread between the initial index basis and the stepped-up index basis;

(b)

50 % of the initial credit spread, less the swap spread between the initial index basis and the stepped-up index basis.

Article 78

Tier 3 Ancillary own-funds– List of own-funds items

Ancillary own-fund items that have been approved by the supervisory authority in accordance with Article 90 of Directive 2009/138/EC, and which do not display all of the features set out in Article 75 shall be classified as Tier 3 ancillary own funds.

Article 79

Supervisory Authorities approval of the assessment and classification of own-fund items

1.   Without prejudice to Article 90 of Directive 2009/138/EC, where an own-fund item is not included in the list of own-funds items set out in Articles 69, 72, 74, 76 and 78, insurance or reinsurance undertakings shall only consider that item as own funds where an approval of the item's assessment and classification has been received from the supervisory authority.

2.   The supervisory authority shall assess the following, on the basis of documents submitted by the insurance or reinsurance undertaking, when approving the assessment and classification of own-fund items not included in the list of own-fund items set out in Articles 69, 72, 74, 76 and 78:

(a)

where the undertaking is applying for approval for classification as Tier 1, whether the basic own-fund item substantially possesses the characteristics set out in Article 93(1)(a) and (b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive;

(b)

where the undertaking is applying for classification as Tier 2 basic own funds, whether the basic own-fund item substantially possesses the characteristics set out in Article 93(1)(b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive;

(c)

where the undertaking is applying for classification as Tier 2 ancillary own funds, whether the ancillary own-fund item substantially possesses the characteristics in Article 93(1)(a) and (b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive;

(d)

where the undertaking is applying for classification as Tier 3 basic own funds, whether the basic own-fund item possesses the characteristics set out in Article 93(1)(b) of Directive 2009/138/EC, taking into consideration the features set out in Article 93(2) of that Directive;

(e)

the legal enforceability of the contractual terms of the own-fund item in all relevant jurisdictions;

(f)

whether the own-fund item has been fully paid-in.

3.   Basic own-fund items not included in the list of own-fund items set out in Articles 69, 72 and 76 shall only be classified as Tier 1 basic own funds where they are fully paid-in.

4.   The inclusion of own-fund items approved by the supervisory authority in accordance with this Article shall be subject to quantitative limits set out in Article 82.

SECTION 3

Eligibility of own funds

Subsection 1

Ring-fenced funds

Article 80

Ring-fenced funds requiring adjustments

1.   A reduction of the reconciliation reserve referred to in Article 70(1)(e) shall be required where own-fund items within a ring-fenced fund have a reduced capacity to fully absorb losses on a going-concern basis due to their lack of transferability within the insurance or reinsurance undertaking for any of the following reasons:

(a)

the items can only be used to cover losses on a defined portion of the insurance or reinsurance undertaking's insurance or reinsurance contracts;

(b)

the items can only be used to cover losses in respect of certain policy holders or beneficiaries;

(c)

the items can only be used to cover losses arising from particular risks or liabilities.

2.   The own-fund items referred to in paragraph 1, (hereinafter referred to as ‘restricted own-fund items’), shall not include the value of future transfers attributable to shareholders.

Article 81

Adjustment for ring-fenced funds and matching adjustment portfolios

1.   For the purposes of calculating the reconciliation reserve, insurance and reinsurance undertakings shall reduce the excess of assets over liabilities referred to in Article 70 by comparing the following amounts:

(a)

the restricted own-fund items within the ring-fenced fund or matching adjustment portfolio;

(b)

the notional Solvency Capital Requirement for the ring-fenced fund or matching adjustment portfolio.

Where the insurance or reinsurance undertaking calculates the Solvency Capital Requirement using the standard formula, the notional Solvency Capital Requirement shall be calculated in accordance with Article 217.

Where the undertaking calculates the Solvency Capital Requirement using an internal model, the notional Solvency Capital Requirement shall be calculated using that internal model, as if the undertaking pursued only the business included in the ring-fenced fund or matching adjustment portfolio.

2.   By way of derogation from paragraph 1, where the assets, the liabilities and the risk within a ring-fenced fund are not material, insurance and reinsurance undertakings may reduce the reconciliation reserve by the total amount of restricted own-fund items.

Subsection 2

Quantitative limits

Article 82

Eligibility and limits applicable to Tiers 1, 2 and 3

1.   As far as compliance with the Solvency Capital Requirement is concerned, the eligible amounts of Tier 2 and Tier 3 items shall be subject to all of the following quantitative limits:

(a)

the eligible amount of Tier 1 items shall be at least one half of the Solvency Capital Requirement;

(b)

the eligible amount of Tier 3 items shall be less than 15 % of the Solvency Capital Requirement;

(c)

the sum of the eligible amounts of Tier 2 and Tier 3 items shall not exceed 50 % of the Solvency Capital Requirement.

2.   As far as compliance with the Minimum Capital Requirements is concerned, the eligible amounts of Tier 2 items shall be subject to all of the following quantitative limits:

(a)

the eligible amount of Tier 1 items shall be at least 80 % of the Minimum Capital Requirement;

(b)

the eligible amounts of Tier 2 items shall not exceed 20 % of the Minimum Capital Requirement.

3.   Within the limit referred to in point (a) of paragraph 1 and point (a) of paragraph 2, the sum of the following basic own-fund items shall make up less than 20 % of the total amount of Tier 1 items:

(a)

items referred to in point (a)(iii) of Article 69;

(b)

items referred to in point (a)(v) of Article 69;

(c)

items referred to in point (b) of Article 69;

(d)

items that are included in Tier 1 basic own funds under the transitional arrangement set out in Article 308b(9) of Directive 2009/138/EC.

CHAPTER V

SOLVENCY CAPITAL REQUIREMENT STANDARD FORMULA

SECTION 1

General provisions

Subsection 1

Scenario based calculations

Article 83

1.   Where the calculation of a module or sub-module of the Basic Solvency Capital Requirement is based on the impact of a scenario on the basic own funds of insurance and reinsurance undertakings, all of the following assumptions shall be made in that calculation:

(a)

the scenario does not change the amount of the risk margin included in technical provisions;

(b)

the scenario does not change the value of deferred tax assets and liabilities;

(c)

the scenario does not change the value of future discretionary benefits included in technical provisions;

(d)

no management actions are taken by the undertaking during the scenario.

2.   The calculation of technical provisions arising as a result of determining the impact of a scenario on the basic own funds of insurance and reinsurance undertakings as referred to in paragraph 1 shall not change the value of future discretionary benefits, and shall take account of all of the following:

(a)

without prejudice to point (d) of paragraph 1, future management actions following the scenario, provided they comply with Article 23;

(b)

any material adverse impact of the scenario or the management actions referred to in point (a) on the likelihood that policy holders will exercise contractual options.

3.   Insurance and reinsurance undertakings may use simplified methods to calculate the technical provisions arising as a result of determining the impact of a scenario as referred to in paragraph 1, provided that the simplified method does not lead to a misstatement of the Solvency Capital Requirement that could influence the decision-making or the judgement of the user of the information relating to the Solvency Capital Requirement, unless the simplified calculation leads to a Solvency Capital Requirement which exceeds the Solvency Capital Requirement that results from the calculation according to the standard formula.

4.   The calculation of assets and liabilities arising as a result of determining the impact of a scenario as referred to in paragraph 1 shall take account of the impact of the scenario on the value of any relevant risk mitigation instruments held by the undertaking which comply with Articles 209 to 215.

5.   Where the scenario would result in an increase in the basic own funds of insurance and reinsurance undertakings, the calculation of the module or sub-module shall be based on the assumption that the scenario has no impact on the basic own funds.

Subsection 2

Look-through approach

Article 84

1.   The Solvency Capital Requirement shall be calculated on the basis of each of the underlying assets of collective investment undertakings and other investments packaged as funds (look-through approach).

2.   The look-through approach referred to in paragraph 1 shall also apply to the following:

(a)

indirect exposures to market risk other than collective investment undertakings and investments packaged as funds;

(b)

indirect exposures to underwriting risk;

(c)

indirect exposures to counterparty risk.

3.   Where the look-through approach cannot be applied to collective investment undertakings or investments packaged as funds, the Solvency Capital Requirement may be calculated on the basis of the target underlying asset allocation of the collective investment undertaking or fund, provided such a target allocation is available to the undertaking at the level of granularity necessary for calculating all relevant sub-modules and scenarios of the standard formula, and the underlying assets are managed strictly according to this target allocation. For the purposes of that calculation, data groupings may be used, provided they are applied in a prudent manner, and that they do not apply to more than 20 % of the total value of the assets of the insurance or reinsurance undertaking.

4.   Paragraph 2 shall not apply to investments in related undertakings within the meaning of Article 212(1)(b) and (2) of Directive 2009/138/EC.

Subsection 3

Regional governments and local authorities

Article 85

The conditions for a categorisation of regional governments and local authorities shall be that there is no difference in risk between exposures to these and exposures to the central government, because of the specific revenue-raising power of the former, and specific institutional arrangements exist, the effect of which is to reduce the risk of default.

Subsection 4

Material basis risk

Article 86

Notwithstanding Article 210(2), where insurance or reinsurance undertakings transfer underwriting risk using reinsurance contracts or special purpose vehicles that are subject to material basis risk from a currency mismatch between underwriting risk and the risk-mitigation technique, insurance or reinsurance undertakings may take into account the risk-mitigation technique in the calculation of the Solvency Capital Requirement according to the standard formula, provided that the risk-mitigation technique complies with Article 209, Article 210(1), (3) and (4) and Article 211, and the calculation is carried out as follows:

(a)

the basis risk stemming from a currency mismatch between underwriting risk and the risk-mitigation technique shall be taken into account in the relevant underwriting risk module, sub-module or scenario of the standard formula at the most granular level by adding 25 % of the difference between the following to the capital requirement calculated in accordance with the relevant module, sub-module or scenario:

(i)

the hypothetical capital requirement for the relevant underwriting risk module, sub-module or scenario that would result from a simultaneous occurrence of the scenario set out in Article 188;

(ii)

the capital requirement for the relevant underwriting risk module, sub-module or scenario.

(b)

where the risk-mitigation technique covers more than one module, sub-module or scenario, the calculation referred to in point (a) shall be carried out for each of those modules, sub-modules and scenarios. The capital requirement resulting from those calculations shall not exceed 25 % of the capacity of the non-proportional reinsurance contract or special purpose vehicle.

Subsection 5

Calculation of the basic solvency capital requirement

Article 87

The Basic Solvency Capital Requirement shall include a risk module for intangible asset risk. and shall be equal to the following:

Formula

where:

(a)

the summation, Corri,j , SCRi and SCRj are specified as set out in point (1) of Annex IV to Directive 2009/138/EC;

(b)

SCRintangibles denotes the capital requirement for intangible asset risk referred to in Article 203.

Subsection 6

Proportionality and simplifications

Article 88

Proportionality

1.   For the purposes of Article 109, insurance and reinsurance undertakings shall determine whether the simplified calculation is proportionate to the nature, scale and complexity of the risks by carrying out an assessment which shall include all of the following:

(a)

an assessment of the nature, scale and complexity of the risks of the undertaking falling within the relevant module or sub-module;

(b)

an evaluation in qualitative or quantitative terms, as appropriate, of the error introduced in the results of the simplified calculation due to any deviation between the following:

(i)

the assumptions underlying the simplified calculation in relation to the risk;

(ii)

the results of the assessment referred to in point (a).

2.   A simplified calculation shall not be considered to be proportionate to the nature, scale and complexity of the risks where the error referred to in point (b) of paragraph 2 leads to a misstatement of the Solvency Capital Requirement that could influence the decision-making or the judgement of the user of the information relating to the Solvency Capital Requirement, unless the simplified calculation leads to a Solvency Capital Requirement which exceeds the Solvency Capital Requirement that results from the standard calculation.

Article 89

General provisions for simplifications for captives

Captive insurance undertakings and captive reinsurance undertakings as defined in points (2) and (5) of Article 13 of Directive 2009/138/EC may use the simplified calculations set out in Articles 90, 103, 105 and 106 of this Regulation where Article 88 of this Regulation is complied with and all of the following requirements are met:

(a)

in relation to the insurance obligations of the captive insurance undertaking or captive reinsurance undertaking, all insured persons and beneficiaries are legal entities of the group of which the captive insurance or captive reinsurance undertaking is part;

(b)

in relation to the reinsurance obligations of the captive insurance or captive reinsurance undertaking, all insured persons and beneficiaries of the insurance contracts underlying the reinsurance obligations are legal entities of the group of which the captive insurance or captive reinsurance undertaking is part;

(c)

the insurance obligations and the insurance contracts underlying the reinsurance obligations of the captive insurance or captive reinsurance undertaking do not relate to any compulsory third party liability insurance.

Article 90

Simplified calculation for captive insurance and reinsurance undertakings of the capital requirement for non-life premium and reserve risk

1.   Where Articles 88 and 89 are complied with, captive insurance and captive reinsurance undertakings may calculate the capital requirement for non-life premium and reserve risk as follows:

Formula

where the s covers all segments set out in Annex II.

2.   For the purposes of paragraph 1, the capital requirement for non-life premium and reserve risk of a particular segment s set out in Annex II shall be equal to the following:

Formula

where:

(a)

V(prem,s) denotes the volume measure for premium risk of segment s calculated in accordance with paragraph 3 of Article 116;

(b)

V(res,s) denotes the volume measure for reserve risk of a segment calculated in accordance with paragraph 6 of Article 116.

Article 91

Simplified calculation of the capital requirement for life mortality risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for life mortality risk as follows:

Formula

where, with respect to insurance and reinsurance policies with a positive capital at risk:

(a)

CAR denotes the total capital at risk, meaning the sum over all contracts of the higher of zero and the difference between the following amounts:

(i)

the sum of:

the amount that the insurance or reinsurance undertaking would currently pay in the event of the death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

the expected present value of amounts not covered in the previous indent that the undertaking would pay in the future in the event of the immediate death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(ii)

the best estimate of the corresponding obligations after deduction of the amounts recoverable form reinsurance contracts and special purpose vehicles;

(b)

q denotes the expected average mortality rate of the insured persons during the following 12 months weighted by the sum insured;

(c)

n denotes the modified duration in years of payments payable on death included in the best estimate;

(d)

ik denotes the annualized spot rate for maturity k of the relevant risk-free term structure as referred to in Article 43.

Article 92

Simplified calculation of the capital requirement for life longevity risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for life longevity risk calculated as follows:

Formula

where, with respect to the policies referred to in Article 138(2):

(a)

q denotes the expected average mortality rate of the insured persons during the following 12 months weighted by the sum insured;

(b)

n denotes the modified duration in years of the payments to beneficiaries included in the best estimate;

(c)

BElong denotes the best estimate of the obligations subject to longevity risk.

Article 93

Simplified calculation of the capital requirement for life disability-morbidity risk

Where 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for life disability-morbidity risk as follows:

SCRdisability-morbidity =

0,35 · CAR 1 · d 1 + 0,25 · 1,1 (n – 3)/2 · (n – 1) · CAR 2 · d 2 + 0,2 · 1,1 (n –1)/2 · t · n · BEdis

where with respect to insurance and reinsurance policies with a positive capital at risk:

(a)

CAR1 denotes the total capital at risk, meaning the sum over all contracts of the higher of zero and the difference between the following amounts:

(i)

the sum of:

the amount that the insurance or reinsurance undertaking would currently pay in the event of the death or disability of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

the expected present value of amounts not covered in the previous indent that the insurance or reinsurance undertaking would pay in the future in the event of the immediate death or disability of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(ii)

the best estimate of the corresponding obligations after deduction of the amounts recoverable form reinsurance contracts and special purpose vehicles;

(b)

CAR2 denotes the total capital at risk as defined in point (a) after 12 months;

(c)

d1 denotes the expected average disability-morbidity rate during the following 12 months weighted by the sum insured;

(d)

d2 denotes the expected average disability-morbidity rate in the 12 months after the following 12 months weighted by the sum insured;

(e)

n denotes the modified duration of the payments on disability-morbidity included in the best estimate;

(f)

t denotes the expected termination rates during the following 12 months;

(g)

BEdis denotes the best estimate of obligations subject to disability-morbidity risk.

Article 94

Simplified calculation of the capital requirement for life-expense risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for life-expense risk as follows:

Formula

where:

(a)

EI denotes the amount of expenses incurred in servicing life insurance or reinsurance obligations other than health insurance and reinsurance obligations during the last year;

(b)

n denotes the modified duration in years of the cash flows included in the best estimate of those obligations;

(c)

i denotes the weighted average inflation rate included in the calculation of the best estimate of those obligations, where the weights are based on the present value of expenses included in the calculation of the best estimate for servicing existing life obligations.

Article 95

Simplified calculation of the capital requirement for permanent changes in lapse rates

1.   Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for the risk of a permanent increase in lapse rates as follows:

Formula

where:

(a)

lup denotes the higher of the average lapse rate of the policies with positive surrender strains and 67 %;

(b)

nup denotes the average period in years over which the policies with a positive surrender strains run off;

(c)

Sup denotes the sum of positive surrender strains.

2.   Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for the risk of a permanent decrease in lapse rates as follows:

Formula

where:

(a)

ldown denotes the higher of the average lapse rate of the policies with negative surrender strains and 40 %;

(b)

ndown denotes the average period in years over which the policies with a negative surrender strains runs off;

(c)

Sdown denotes the sum of negative surrender strains.

3.   The surrender strain of an insurance policy referred to in paragraphs 1 and 2 is the difference between the following:

(a)

the amount currently payable by the insurance undertaking on discontinuance by the policy holder, net of any amounts recoverable from policy holders or intermediaries;

(b)

the amount of technical provisions without the risk margin.

Article 96

Simplified calculation of the capital requirement for life-catastrophe risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for life-catastrophe risk calculated as follows:

Formula

where:

(a)

the sum includes all policies with a positive capital at risk;

(b)

CARi denotes the capital at risk of the policy i, meaning the higher of zero and the difference between the following amounts:

(i)

the sum of:

the amount that the insurance or reinsurance undertaking would currently pay in the event of the death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

the expected present value of amounts not covered in the previous indent that the insurance or reinsurance undertaking would pay in the future in the event of the immediate death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(ii)

the best estimate of the corresponding obligations after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles.

Article 97

Simplified calculation of the capital requirement for health mortality risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for health mortality risk as follows:

Formula

where with respect to insurance and reinsurance policies with a positive capital at risk:

(a)

CAR denotes the total capital at risk, meaning the sum, in relation to each contract, of the higher of zero and the difference between the following amounts:

(i)

the sum of:

the amount that the insurance or reinsurance undertaking would currently pay in the event of the death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

the expected present value of amounts not covered in the previous indent that the insurance and reinsurance undertaking would pay in the future in the event of the immediate death of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(ii)

the best estimate of the corresponding obligations after deduction of the amounts recoverable form reinsurance contracts and special purpose vehicles;

(b)

q denotes the expected average mortality rate of the insured persons over the following 12 months weighted by the sum insured;

(c)

n denotes the modified duration in years of payments payable on death included in the best estimate;

(d)

ik denotes the annualized spot rate for maturity k of the relevant risk-free term structure as referred to in Article 43.

Article 98

Simplified calculation of the capital requirement for health longevity risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for health longevity risk as follows:

Formula

where, with respect to the policies referred to in Article 138(2):

(a)

q denotes the expected average mortality rate of the insured persons during the following 12 months weighted by the sum insured;

(b)

n denotes the modified duration in years of the payments to beneficiaries included in the best estimate;

(c)

BElong denotes the best estimate of the obligations subject to longevity risk.

Article 99

Simplified calculation of the capital requirement for medical expense disability-morbidity risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for medical expense disability-morbidity risk as follows:

Formula

where:

(a)

MP denotes the amount of medical payments during the last year on medical expense insurance or reinsurance obligations during the last year;

(b)

n denotes the modified duration in years of the cash flows included in the best estimate of those obligations;

(c)

i denotes the average rate of inflation on medical payments included in the calculation of the best estimate of those obligations, where the weights are based on the present value of medical payments included in the calculation of the best estimate of those obligations.

Article 100

Simplified calculation of the capital requirement for income protection disability-morbidity risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for income protection disability-morbidity risk as follows:

SCRincome-protection-disability-morbidity =

0,35 · CAR 1 · d 1 + 0,25 · 1,1 (n – 3)/2 · (n – 1) · CAR 2 · d 2 + 0,2 · 1,1 (n –1)/2 · t · n · BEdis

where with respect to insurance and reinsurance policies with a positive capital at risk:

(a)

CAR 1 denotes the total capital at risk, meaning the sum over all contracts of the higher of zero and the difference between the following amounts:

(i)

the sum of:

the amount that the insurance or reinsurance undertaking would currently pay in the event of the death or disability of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

the expected present value of amounts not covered in the previous indent that the undertaking would pay in the future in the event of the immediate death or disability of the persons insured under the contract after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles;

(ii)

the best estimate of the corresponding obligations after deduction of the amounts recoverable form reinsurance contracts and special purpose vehicles;

(b)

CAR 2 denotes the total capital at risk as defined in point (a) after 12 months;

(c)

d 1 denotes the expected average disability-morbidity rate during the following 12 months weighted by the sum insured;

(d)

d 2 denotes the expected average disability-morbidity rate in the 12 months after the following 12 months weighted by the sum insured;

(e)

n denotes the modified duration of the payments on disability-morbidity included in the best estimate;

(f)

t denotes the expected termination rates during the following 12 months;

(g)

BEdis denotes the best estimate of obligations subject to disability-morbidity risk.

Article 101

Simplified calculation of the capital requirement for health expense risk

Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for health expense risk as follows:

Formula

where:

(1)

EI denotes the amount of expenses incurred in servicing health insurance and reinsurance obligations during the last year;

(2)

n denotes the modified duration in years of the cash flows included in the best estimate of those obligations;

(3)

i denotes the weighted average inflation rate included in the calculation of the best estimate of these obligations, weighted by the present value of expenses included in the calculation of the best estimate for servicing existing health obligations.

Article 102

Simplified calculation of the capital requirement for SLT health lapse risk

1.   Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for the risk of a permanent increase in lapse rates referred to in Article 159(1)(a) as follows:

Formula

where:

(a)

lup denotes the higher of the average lapse rate of the policies with positive surrender strains and 83 %;

(b)

nup denotes the average period in years over which the policies with a positive surrender strains run off;

(c)

Sup denotes the sum of positive surrender strains.

2.   Where Article 88 is complied with, insurance and reinsurance undertakings may calculate the capital requirement for the risk of a permanent decrease in lapse rates referred to in 159(1)(b) as follows:

Formula

where:

(a)

ldown denotes the average lapse rate of the policies with negative surrender strains;

(b)

ndown denotes the average period in years over which the policies with a negative surrender strains runs off;

(c)

Sdown denotes the sum of negative surrender strains.

3.   The surrender strain of an insurance policy referred to in paragraphs (1) and (2) is the difference between the following:

(a)

the amount currently payable by the insurance undertaking on discontinuance by the policy holder, net of any amounts recoverable from policy holders or intermediaries;

(b)

the amount of technical provisions without the risk margin.

Article 103

Simplified calculation of the capital requirement for interest rate risk for captive insurance or reinsurance undertakings

1.   Where Articles 88 and 89 are complied with, captive insurance or captive reinsurance undertakings may calculate the capital requirement for interest rate risk referred to in Article 165 as follows:

(a)

the sum, for each currency, of the capital requirements for the risk of an increase in the term structure of interest rates as set out in paragraph 2 of this Article;

(b)

the sum, for each currency, of the capital requirements for the risk of a decrease in the term structure of interest rates as set out in paragraph 3 of this Article.

2.   For the purposes of point (a) of paragraph 1 of this Article, the capital requirement for the risk of an increase in the term structure of interest rates for a given currency shall be equal to the following:

Formula

where:

(a)

the first sum covers all maturity intervals i set out in paragraph 4 of this Article;

(b)

MVALi denotes the value in accordance with Article 75 of Directive 2009/138/EC of assets less liabilities other than technical provisions for maturity interval i;

(c)

duri denotes the simplified duration of maturity interval i;

(d)

ratei denotes the relevant risk-free rate for the simplified duration of maturity interval i;

(e)

stress(i,up) denotes the relative upward stress of interest rate for simplified duration of maturity interval i;

(f)

the second sum covers all lines of business set out in Annex I of this Regulation;

(g)

BElob denotes the best estimate for line of business lob;

(h)

durlob denotes the modified duration of the best estimate in line of business lob;

(i)

ratelob denotes the relevant risk-free rate for modified duration in line of business lob;

(j)

stress(lob,up) denotes the relative upward stress of interest rate for the modified duration durlob .

3.   For the purposes of point (b) of paragraph 1 of this Article, the capital requirement for the risk of a decrease in the term structure of interest rates for a given currency shall be equal to the following:

Formula

where:

(a)

the first sum covers all maturity intervals i set out in paragraph 4;

(b)

MVALi denotes the value in accordance with Article 75 of Directive 2009/138/EC of assets less liabilities other than technical provisions for maturity interval i;

(c)

duri denotes the simplified duration of maturity interval i;

(d)

ratei denotes the relevant risk-free rate for the simplified duration of maturity interval i;

(e)

stress(i,down) denotes the relative downward stress of interest rate for simplified duration of maturity interval i;

(f)

the second sum covers all lines of business set out in Annex I of this Regulation;

(g)

BElob denotes the best estimate for line of business lob;

(h)

durlob denotes the modified duration of the best estimate in line of business lob;

(i)

ratelob denotes the relevant risk-free rate for modified duration in line of business lob;

(j)

stress(lob, down) denote the relative downward stress of interest rate for modified duration durlob .

4.   The maturity intervals i and the simplified duration duri referred to in points (a) and (c)of paragraph 2 and in point (a) and (c) of paragraph 3 shall be as follows:

(a)

up to the maturity of one year, the simplified duration shall be 0.5 years;

(b)

between maturities of 1 and 3 years, the simplified duration shall be 2 years;

(c)

between maturities of 3 and 5 years, the simplified duration shall be 4 years;

(d)

between maturities of 5 and 10 years, the simplified duration shall be 7 years;

(e)

from the maturity of 10 years onwards, the simplified duration shall be 12 years.

Article 104

Simplified calculation for spread risk on bonds and loans

1.   Where Article 88 is complied with, insurance or reinsurance undertakings may calculate the capital requirement for spread risk referred to in Article 176 of this Regulation as follows:

Formula

where:

(a)

SCRbonds denotes the capital requirement for spread risk on bonds and loans;

(b)

MVbonds denotes the value in accordance with Article 75 of Directive 2009/138/EC of the assets subject to capital requirements for spread risk on bonds and loans;

(c)

%MVi bonds denotes the proportion of the portfolio of the assets subject to a capital requirement for spread risk on bonds and loans with credit quality step i, where a credit assessment by a nominated ECAI is available for those assets;

(d)

%MVbonds norating denotes the proportion of the portfolio of the assets subject to a capital requirement for spread risk on bonds and loans for which no credit assessment by a nominated ECAI is available;

(e)

duri and durnorating denote the modified duration denominated in years of the assets subject to a capital requirement for spread risk on bonds and loans where no credit assessment by a nominated ECAI is available;

(f)

stressi denotes a function of the credit quality step i and of the modified duration denominated in years of the assets subject to a capital requirement for spread risk on bonds and loans with credit quality step i, set out in paragraph 2;

(g)

ΔLiabul denotes the increase in the technical provisions less risk margin for policies where the policyholders bear the investment risk with embedded options and guarantees that would result from an instantaneous decrease in the value of the assets subject to the capital requirement for spread risk on bonds of:

Formula

.

2.   stressi referred to in point (f) of paragraph 1, for each credit quality step i, shall be equal to:Formula, where duri is the modified duration denominated in years of the assets subject to a capital requirement for spread risk on bonds and loans with credit quality step i, and bi is determined in accordance with the following table:

Credit quality step i

0

1

2

3

4

5

6

bi

0,9 %

1,1 %

1,4 %

2,5 %

4,5 %

7,5 %

7,5 %

3.   durnorating referred to in point (e) of paragraph 1 and duri referred to in paragraph 2 shall not be lower than 1 year.

Article 105

Simplified calculation for captive insurance or reinsurance undertakings of the capital requirement for spread risk on bonds and loans

Where Articles 88 and 89 are complied with, captive insurance or captive reinsurance undertakings may base the calculation of the capital requirement for spread risk to in Article 176 on the assumption that all assets are assigned to credit quality step 3.

Article 106

Simplified calculation of the capital requirement for market risk concentration for captive insurance or reinsurance undertakings

Where Articles 88 and 89 are complied with, captive insurance or captive reinsurance undertakings may use all of the following assumptions for the calculation of the capital requirement for concentration risk:

(1)

intra-group asset pooling arrangements of captive insurance or reinsurance undertakings may be exempted from the calculation base referred to in Article 184(2) to the extent that there exist legally enforceable contractual terms which ensure that the liabilities of the captive insurance or reinsurance undertaking will be offset by the intra-group exposures it holds against other entities of the group.

(2)

the relative excess exposure threshold referred to in Article 184(1)(c) shall be equal to 15 % for the following single name exposures:

(a)

exposures to credit institutions that do not belong to the same group and that have been assigned to the credit quality step 2;

(b)

exposures to entities of the group that manages the cash of the captive insurance or reinsurance undertaking that have been assigned to the credit quality step 2.

Article 107

Simplified calculation of the risk mitigating effect for reinsurance arrangements or securitisation

1.   Where Article 88 is complied with, insurance or reinsurance undertakings may calculate the risk-mitigating effect on underwriting risk of a reinsurance arrangement or securitisation referred to in Article 196 as follows:

Formula

where

(a)

RMre,all denotes the risk mitigating effect on underwriting risk of the reinsurance arrangements and securitisations for all counterparties calculated in accordance with paragraph 2;

(b)

Recoverablesi denotes the best estimate of amounts recoverable from the reinsurance arrangement or securitisation and the corresponding debtors for counterparty i and Recoverablesall denotes the best estimate of amounts recoverable from the reinsurance arrangements and securitisations and the corresponding debtors for all counterparties.

2.   The risk mitigating effect on underwriting risk of the reinsurance arrangements and securitisations for all counterparties referred to in paragraph 1 is the difference between the following capital requirements:

(a)

the hypothetical capital requirement for underwriting risk of the insurance or reinsurance undertaking if none of the reinsurance arrangements and securitisations exist;

(b)

the capital requirements for underwriting risk of the insurance or reinsurance undertaking.

Article 108

Simplified calculation of the risk mitigating effect for proportional reinsurance arrangements

Where Article 88 is complied with, insurance or reinsurance undertakings may calculate the risk-mitigating effect on underwriting risk j of a proportional reinsurance arrangement for counterparty i referred to Article 196 as follows:

Formula

where

(a)

BE denotes the best estimate of obligations gross of the amounts recoverable,

(b)

Recoverablesi denotes the best estimate of amounts recoverable from the proportional reinsurance arrangement and the corresponding debtors for counterparty i,

(c)

Recoverablesall denotes the best estimate of amounts recoverable from the proportional reinsurance arrangements and the corresponding debtors for all counterparties

(d)

SCRj denotes the capital requirements for underwriting risk j of the insurance or reinsurance undertaking.

Article 109

Simplified calculations for pooling arrangements

Where Article 88 is complied with, insurance or reinsurance undertakings may use the following simplified calculations for the purposes of Articles 193, 194 and 195:

(a)

The best estimate referred to in Article 194(1)(d) may be calculated as follows:

Formula

where BEU denotes the best estimate of the liability ceded to the pooling arrangement by the undertaking to the pooling arrangement, net of any amounts reinsured with counterparties external to the pooling arrangement.

(b)

The best estimate referred to in Article 195(c) may be calculated as follows:

Formula

where BECEP denotes the best estimate of the liability ceded to the external counterparty by the pool, in relation to risk ceded to the pool by the undertaking.

(c)

The risk mitigating effect referred to in Article 195(d) may be calculated as follows:

Formula

where:

(i)

BECE denotes the best estimate of the liability ceded to the external counterparty by the pooling arrangement as a whole;

(ii)

ΔRMCEP denotes the contribution of all external counterparties to the risk mitigating effect of the pooling arrangement on the underwriting risk of the undertaking;

(d)

The counterparty pool members and the counterparties external to the pool may be grouped according to the credit assessment by a nominated ECAI, provided there are separate groupings for pooling exposures of type A, type B and type C.

Article 110

Simplified calculation — grouping of single name exposures

Where Article 88 is complied with, insurance or reinsurance undertakings may calculate the loss-given-default set out in Article 192 for a group of single name exposures. In that case, the group of single name exposures shall be assigned the highest probability of default assigned to single name exposures included in the group in accordance with Article 199.

Article 111

Simplified calculation of the risk mitigating effect

Where Article 88 is complied with, insurance or reinsurance undertakings may calculate the risk-mitigating effect on underwriting and market risk of a reinsurance arrangement, securitisation or derivative referred to in Article 196 as the difference between the following capital requirements:

(a)

the sum of the hypothetical capital requirement for the sub-modules of the underwriting and market risk modules of the insurance or reinsurance undertaking affected by the risk-mitigating technique, as if the reinsurance arrangement, securitisation or derivative did not exist;

(b)

the sum of the capital requirements for the sub-modules of the underwriting and market risk modules of the insurance or reinsurance undertaking affected by the risk-mitigating technique.

Article 112

Simplified calculation of the risk adjusted value of collateral to take into account the economic effect of the collateral

1.   Where Article 88 of this Regulation is complied with, and where the counterparty requirement and the third party requirement referred to in Article 197(1) are both met, insurance or reinsurance undertakings may, for the purposes of Article 197, calculate the risk-adjusted value of a collateral provided by way of security as referred to in Article 1(26)(b), as 85 % of the value of the assets held as collateral, valued in accordance with Article 75 of Directive 2009/138/EC.

2.   Where Articles 88 and 214 of this Regulation are complied with, and where the counterparty requirement referred to in Article 197(1) is met and the third party requirement referred to in Article 197(1) is not met, insurance or reinsurance undertakings may, for the purposes of Article 197, calculate the risk-adjusted value of a collateral provided by way of security as referred to in Article 1(26)(b), as 75 % of the value of the assets held as collateral, valued in accordance with Article 75 of Directive 2009/138/EC.

Subsection 7

Scope of the underwriting risk modules

Article 113

For the calculation of the capital requirements for non-life underwriting risk, life underwriting risk and health underwriting risk, insurance and reinsurance undertakings shall apply:

(a)

the non-life underwriting risk module to non-life insurance and reinsurance obligations other than health insurance and reinsurance obligations;

(b)

the life underwriting risk module to life insurance and reinsurance obligations other than health insurance and reinsurance obligations;

(c)

the health underwriting risk module to health insurance and reinsurance obligations.

SECTION 2

Non-life underwriting risk module

Article 114

Non-life underwriting risk module

1.   The non-life underwriting risk module shall consist of all of the following sub-modules:

(a)

the non-life premium and reserve risk sub-module referred to in point (a) of the third subparagraph of Article 105(2) of Directive 2009/138/EC;

(b)

the non-life catastrophe risk sub-module referred to in point (b) of the third subparagraph of Article 105(2) of Directive 2009/138/EC;

(c)

the non-life lapse risk sub-module.

2.   The capital requirement for non-life underwriting risk shall be equal to the following:

Formula

where:

(a)

the sum covers all possible combinations (i,j) of the sub-modules set out in paragraph 1;

(b)

CorrNL(i,j) denotes the correlation parameter for non-life underwriting risk for sub-modules i and j;

(c)

SCRi and SCRj denote the capital requirements for risk sub-module i and j respectively.

3.   The correlation parameter CorrNL(i,j) referred to in paragraph 2 denotes the item set out in row i and in column j of the following correlation matrix:

j

i

Non-life premium and reserve

Non-life catastrophe

Non-life lapse

Non-life premium and reserve

1

0,25

0

Non-life catastrophe

0,25

1

0

Non-life lapse

0

0

1

Article 115

Non-life premium and reserve risk sub-module

The capital requirement for non-life premium and reserve risk shall be equal to the following:

Formula

where:

(a)

σnl denotes the standard deviation for non-life premium and reserve risk determined in accordance with Article 117;

(b)

Vnl denotes the volume measure for non-life premium and reserve risk determined in accordance with Article 116.

Article 116

Volume measure for non-life premium and reserve risk

1.   The volume measure for non-life premium and reserve risk shall be equal to the sum of the volume measures for premium and reserve risk of the segments set out in Annex II.

2.   For all segments set out in Annex II, the volume measure of a particular segment s shall be equal to the following:

Formula

where:

(a)

V(prem,s) denotes the volume measure for premium risk of segment s;

(b)

V(res,s) denotes the volume measure for reserve risk of segment s;

(c)

DIVs denotes the factor for geographical diversification of segment s.

3.   For all segments set out in Annex II, the volume measure for premium risk of a particular segment s shall be equal to the following:

Formula

where:

(a)

Ps denotes an estimate of the premiums to be earned by the insurance or reinsurance undertaking in the segment s during the following 12 months;

(b)

P(last,s) denotes the premiums earned by the insurance or reinsurance undertaking in the segment s during the last 12 months;

(c)

FP(existing,s) denotes the expected present value of premiums to be earned by the insurance or reinsurance undertaking in the segment s after the following 12 months for existing contracts;

(d)

FP(future,s) denotes the expected present value of premiums to be earned by the insurance and reinsurance undertaking in the segment s for contracts where the initial recognition date falls in the following 12 months but excluding the premiums to be earned during the 12 months after the initial recognition date.

4.   For all segments set out in Annex II, insurance and reinsurance undertakings may, as an alternative to the calculation set out in paragraph 3 of this Article, choose to calculate the volume measure for premium risk of a particular segment s in accordance with the following formula:

Formula

provided that the all of following conditions are met:

(a)

the administrative, management or supervisory body of the insurance or reinsurance undertaking has decided that its earned premiums in the segment s during the following 12 months will not exceed Ps ;

(b)

the insurance or reinsurance undertaking has established effective control mechanisms to ensure that the limits on earned premiums referred to in point (a) will be met;

(c)

the insurance or reinsurance undertaking has informed its supervisory authority about the decision referred to in point (a) and the reasons for it.

For the purposes of this calculation, the terms Ps , FP(existing,s) and FP(future,s) shall be denoted in accordance with points (a), (c) and (d) of paragraph 3.

5.   For the purposes of the calculations set out in paragraphs 3 and 4, premiums shall be net, after deduction of premiums for reinsurance contracts. The following premiums for reinsurance contracts shall not be deducted:

(a)

premiums in relation to non-insurance events or settled insurance claims that are not accounted for in the cash-flows referred to in Article 41(3);

(b)

premiums for reinsurance contracts that do not comply with Articles 209, 210, 211 and 213.

6.   For all segments set out in Annex II, the volume measure for reserve risk of a particular segment shall be equal to the best estimate of the provisions for claims outstanding for the segment, after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, provided that the reinsurance contracts or special purpose vehicles comply with Articles 209, 210, 211 and 213. The volume measure shall not be a negative amount.

7.   For all segments set out in Annex II, the default factor for geographical diversification of a particular segment shall be either 1 or calculated in accordance with Annex III.

Article 117

Standard deviation for non-life premium and reserve risk

1.   The standard deviation for non-life premium and reserve risk shall be equal to the following:

Formula

where:

(a)

Vnl denotes the volume measure for non-life premium and reserve risk;

(b)

the sum covers all possible combinations (s,t) of the segments set out in Annex II;

(c)

CorrS(s,t) denotes the correlation parameter for non-life premium and reserve risk for segment s and segment t set out in Annex IV;

(d)

σs and σt denote standard deviations for non-life premium and reserve risk of segments s and t respectively;

(e)

Vs and Vt denote volume measures for premium and reserve risk of segments s and t, referred to in Article 116, respectively.

2.   For all segments set out in Annex II, the standard deviation for non-life premium and reserve risk of a particular segment s shall be equal to the following:

Formula

where:

(a)

σ(prem,s) denotes the standard deviation for non-life premium risk of segment s determined in accordance with paragraph 3;

(b)

σ(res,s) denotes the standard deviation for non-life reserve risk of segment s as set out in Annex II;

(c)

V(prem,s) denotes the volume measure for premium risk of segment s referred to in Article 116;

(d)

V(res,s) denotes the volume measure for reserve risk of segment s referred to in Article 116.

3.   For all segments set out in Annex II, the standard deviation for non-life premium risk of a particular segment shall be equal to the product of the standard deviation for non-life gross premium risk of the segment set out in Annex II and the adjustment factor for non-proportional reinsurance. For segments 1, 4 and 5 set out in Annex II the adjustment factor for non-proportional reinsurance shall be equal to 80 %. For all other segments set out in Annex the adjustment factor for non-proportional reinsurance shall be equal to 100 %.

Article 118

Non-life lapse risk sub-module

1.   The capital requirement for the non-life lapse risk sub-module referred to in 114(1)(c) shall be equal to the loss in basic own funds of the insurance or reinsurance undertaking resulting from a combination of the following instantaneous events:

(a)

the discontinuance of 40 % of the insurance policies for which discontinuance would result in an increase of technical provisions without the risk margin;

(b)

where reinsurance contracts cover insurance or reinsurance contracts that will be written in the future, the decrease of 40 % of the number of those future insurance or reinsurance contracts used in the calculation of technical provisions.

2.   The events referred to in paragraph 1 shall apply uniformly to all insurance and reinsurance contracts concerned. In relation to reinsurance contracts the event referred to in point (a) of paragraph 1 shall apply to the underlying insurance contracts.

3.   For the purposes of determining the loss in basic own funds of the insurance or reinsurance undertaking under the event referred to in point (a) of paragraph 1, the undertaking shall base the calculation on the type of discontinuance which most negatively affects the basic own funds of the undertaking on a per policy basis.

Article 119

Non-life catastrophe risk sub-module

1.   The non-life catastrophe risk sub-module shall consist of all of the following sub-modules:

(a)

the natural catastrophe risk sub-module;

(b)

the sub-module for catastrophe risk of non-proportional property reinsurance;

(c)

the man-made catastrophe risk sub-module;

(d)

the sub-module for other non-life catastrophe risk.

2.   The capital requirement for the non-life catastrophe underwriting risk module shall be equal to the following:

Formula

where:

(a)

SCRnatCAT denotes the capital requirement for natural catastrophe risk;

(b)

SCRnpproperty denotes the capital requirement for the catastrophe risk of non-proportional property reinsurance;

(c)

SCRmmCAT denotes the capital requirement for man-made catastrophe risk;

(d)

SCRCATother denotes the capital requirement for other non-life catastrophe risk.

Article 120

Natural catastrophe risk sub-module

1.   The natural catastrophe risk sub-module shall consist of all of the following sub-modules:

(a)

the windstorm risk sub-module;

(b)

the earthquake risk sub-module;

(c)

the flood risk sub-module;

(d)

the hail risk sub-module;

(e)

the subsidence risk sub-module.

2.   The capital requirement for natural catastrophe risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations of the sub-modules i set out in paragraph 1;

(b)

SCRi denotes the capital requirement for sub-module i.

Article 121

Windstorm risk sub-module

1.   The capital requirement for windstorm risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations (r,s) of the regions set out in Annex V;

(b)

CorrWS(r,s) denotes the correlation coefficient for windstorm risk for region r and region s as set out in Annex V;

(c)

SCR(windstorm,r) and SCR(windstorm,s) denote the capital requirements for windstorm risk in region r and s respectively;

(d)

SCR(windstorm,other) denotes the capital requirement for windstorm risk in regions other than those set out in Annex XIII.

2.   For all regions set out in Annex V the capital requirement for windstorm risk in a particular region r shall be the larger of the following two capital requirements:

(a)

the capital requirement for windstorm risk in region r according to scenario A as set out in paragraph 3;

(b)

the capital requirement for windstorm risk in region r according to scenario B as set out in paragraph 4.

3.   For all regions set out in Annex V the capital requirement for windstorm risk in a particular region r according to scenario A shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 80 % of the specified windstorm loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 40 % of the specified windstorm loss in region r.

4.   For all regions set out in Annex V the capital requirement for windstorm risk in a particular region r according to scenario B shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 100 % of the specified windstorm loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 20 % of the specified windstorm loss in region r.

5.   For all regions set out in Annex V, the specified windstorm loss in a particular region r shall be equal to the following amount:

Formula

where:

(a)

Q(windstorm,r) denotes the windstorm risk factor for region r as set out in Annex V;

(b)

the sum includes all possible combinations of risk zones (i,j) of region r set out in Annex IX;

(c)

Corr(windstorm,r,i,j) denotes the correlation coefficient for windstorm risk in risk zones i and j of region r set out in Annex XXII;

(d)

WSI(windstorm,r,i) and WSI(windstorm,r,j) denote the weighted sums insured for windstorm risk in risk zones i and j of region r set out in Annex IX.

6.   For all regions set out in Annex V and all risk zones of those regions set out in Annex IX the weighted sum insured for windstorm risk in a particular windstorm zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

W(windstorm,r,i) denotes the risk weight for windstorm risk in risk zone i of region r set out in Annex X;

(b)

SI(windstorm,r,i) denotes the sum insured for windstorm risk in windstorm zone i of region r.

7.   For all regions set out in Annex V and all risk zones of those regions set out in Annex IX, the sum insured for windstorm risk in a particular windstorm zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

SI(property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 7 and 19 set out in Annex I in relation to contracts that cover windstorm risk and where the risk is situated in risk zone i of region r;

(b)

SI(onshore-property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 6 and 18 set out in Annex I in relation to contracts that cover onshore property damage by windstorm and where the risk is situated in risk zone i of region r.

8.   The capital requirement for windstorm risk in regions other than those set out in Annex XIII shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss in relation to each insurance and reinsurance contract that covers any of the following insurance or reinsurance obligations:

(a)

obligations of lines of business 7 or 19 set out in Annex I that cover windstorm risk and where the risk is not situated in one of the regions set out in Annex XIII;

(b)

obligations of lines of business 6 or 18 set out in Annex I in relation to onshore property damage by windstorm and where the risk is not situated in one of the regions set out in Annex XIII.

9.   The amount of the instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, referred to in paragraph 8 shall be equal to the following amount:

Formula

where:

(a)

DIVwindstorm is calculated in accordance with Annex III, but based on the premiums in relation to the obligations referred to in paragraph 8 and restricted to the regions 5 to 18 set out in point (8) of Annex III;

(b)

Pwindstorm is an estimate of the premiums to be earned by insurance and reinsurance undertakings for each contract that covers the obligations referred to in paragraph 8 during the following 12 months: for this purpose premiums shall be gross, without deduction of premiums for reinsurance contracts.

Article 122

Earthquake risk sub-module

1.   The capital requirement for earthquake risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations (r,s) of the regions set out in Annex VI;

(b)

CorrEQ(r,s) denotes the correlation coefficient for earthquake risk for region r and region s as set out in Annex VI;

(c)

SCR(earthquake,r) and SCR(earthquake,s) denote the capital requirements for earthquake risk in region r and s respectively;

(d)

SCR(earthquake,other) denotes the capital requirement for earthquake risk in regions other than those set out in Annex XIII.

2.   For all regions set out in Annex VII, the capital requirement for earthquake risk in a particular region r shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following amount:

Formula

where:

(a)

Q(earthquake,r) denotes the earthquake risk factor for region r as set out in Annex VI;

(b)

the sum includes all possible combinations of risk zones (i,j) of region r set out in Annex IX;

(c)

Corr(earthquake,r,i,j) denotes the correlation coefficient for earthquake risk in risk zones i and j of region r set out in Annex XXIII;

(d)

WSI(earthquake,r,i) and WSI(earthquake,r,j) denote the weighted sums insured for earthquake risk in risk zones i and j of region r set out in Annex IX.

3.   For all regions set out in Annex VI and all risk zones of those regions set out in Annex IX, the weighted sum insured for earthquake risk in a particular earthquake zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

W(earthquake,r,i) denotes the risk weight for earthquake risk in risk zone i of region r set out in Annex X;

(b)

SI(earthquake,r,i) denotes the sum insured for earthquake risk in earthquake zone i of region r.

4.   For all regions set out in Annex VI and all risk zones of those regions set out in Annex IX, the sum insured for earthquake risk in a particular earthquake zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

SI(property,r,i) denotes the sum insured of the insurance or reinsurance undertaking for lines of business 7 and 19 as set out in Annex I in relation to contracts that cover earthquake risk and where the risk is situated in risk zone i of region r;

(b)

SI(onshore-property,r,i) denotes the sum insured of the insurance or reinsurance undertaking for lines of business 6 and 18 as set out in Annex I in relation to contracts that cover onshore property damage by earthquake and where the risk is situated in risk zone i of region r.

5.   The capital requirement for earthquake risk in regions other than those set out in Annex XIII shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss in relation to each insurance and reinsurance contract that covers one or both of the following insurance or reinsurance obligations:

(a)

obligations of lines of business 7 or 19 as set out in Annex I that cover earthquake risk, where the risk is not situated in one of the regions set out in Annex XIII;

(b)

obligations of lines of business 6 or 18 as set out in Annex I in relation to onshore property damage by earthquake, where the risk is not situated in one of the regions set out in Annex XIII.

6.   The amount of the instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, referred to in paragraph 5 shall be equal to the following amount:

Formula

where:

(a)

DIVearthquake is calculated in accordance with Annex III, but based on the premiums in relation to the obligations referred to in points (a) and (b) of paragraph 5 and restricted to the regions 5 to 18 set out in Annex III;

(b)

Pearthquake is an estimate of the premiums to be earned by insurance and reinsurance undertakings for each contract that covers the obligations referred to in points (a) and (b) of paragraph 5 during the following 12 months: for this purpose premiums shall be gross, without deduction of premiums for reinsurance contracts.

Article 123

Flood risk sub-module

1.   The capital requirement for flood risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations (r,s) of the regions set out in Annex VII;

(b)

CorrFL(r,s) denotes the correlation coefficient for flood risk for region r and region s as set out in Annex VII;

(c)

SCR(flood,r) and SCR(flood,s) denote the capital requirements for flood risk in region r and s respectively;

(d)

SCR(flood,other) denotes the capital requirement for flood risk in regions other than those set out in Annex XIII.

2.   For all regions set out in Annex VII, the capital requirement for flood risk in a particular region r shall be the larger of the following capital requirements:

(a)

the capital requirement for flood risk in region r according to scenario A as set out in paragraph 3;

(b)

the capital requirement for flood risk in region r according to scenario B as set out in paragraph 4.

3.   For all regions set out in Annex VII, the capital requirement for flood risk in a particular region r according to scenario A shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 65 % of the specified flood loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 45 % of the specified flood loss in region r.

4.   For all regions set out in Annex VII, the capital requirement for flood risk in a particular region r according to scenario B shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 100 % of the specified flood loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 10 % of the specified flood loss in region r.

5.   For all regions set out in Annex VII, the specified flood loss in a particular region r shall be equal to the following amount:

Formula

where:

(a)

Q(flood,r) denotes the flood risk factor for region r as set out in Annex VII;

(b)

the sum includes all possible combinations of risk zones (i,j) of region r set out in Annex IX;

(c)

Corr(flood,r,i,j) denotes the correlation coefficient for flood risk in flood zones i and j of region r set out in Annex XXIV;

(d)

WSI(flood,r,i) and WSI(flood,r,j) denote the weighted sums insured for flood risk in risk zones i and j of region r set out in Annex IX.

6.   For all regions set out in Annex VII and all risk zones of those regions set out in Annex IX, the weighted sum insured for flood risk in a particular flood zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

W(flood,r,i) denotes the risk weight for flood risk in risk zone i of region r set out in Annex X;

(b)

SI(flood,r,i) denotes the sum insured for flood risk in flood zone i of region r.

7.   For all regions set out in Annex VII and all risk zones of those regions set out in Annex IX, the sum insured for a particular flood zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

SI(property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 7 and 19 as set out in Annex I in relation to contracts that cover flood risk, where the risk is situated in risk zone i of region r;

(b)

SI(onshore-property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 6 and 18 as set out in Annex I in relation to contracts that cover onshore property damage by flood and where the risk is situated in risk zone i of region r;

(c)

SI(motor,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 5 and 17 as set out in Annex I in relation to contracts that cover flood risk, where the risk is situated in risk zone i of region r.

8.   The capital requirement for flood risk in regions other than those set out in Annex XIII, shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss in relation to each insurance and reinsurance contract that covers any of the following insurance or reinsurance obligations:

(a)

obligations of lines of business 7 or 19 as set out in Annex I that cover flood risk, where the risk is not situated in one of the regions set out in Annex XIII;

(b)

obligations of lines of business 6 or 18 as set out in Annex I in relation to onshore property damage by flood, where the risk is not situated in one of the regions set out in Annex XIII;

(c)

obligations of lines of business 5 or 17 as set out in Annex I that cover flood risk, where the risk is not situated in one of the regions set out in Annex XIII.

9.   The amount of the instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, referred to in paragraph 8 shall be equal to the following amount:

Formula

where:

(a)

DIVflood is calculated in accordance with Annex III, but based on the premiums in relation to the obligations referred to in points (a), (b) and (c) of paragraph 8 and restricted to the regions 5 to 18 set out in point (8) of Annex III;

(b)

Pflood is an estimate of the premiums to be earned by the insurance or reinsurance undertaking for each contract that covers the obligations referred to in points (a), (b) and (c) of paragraph 8 during the following 12 months: for this purpose, premiums shall be gross, without deduction of premiums for reinsurance contracts.

Article 124

Hail risk sub-module

1.   The capital requirement for hail risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations (r,s) of the regions set out in Annex VIII;

(b)

CorrHL(r,s) denotes the correlation coefficient for hail risk for region r and region s as set out in Annex VIII;

(c)

SCR(hail,r) and SCR(hail,s) denote the capital requirements for hail risk in regions r and s respectively;

(d)

SCR(hail,other) denotes the capital requirement for hail risk in regions other than those set out in Annex XIII.

2.   For all regions set out in Annex VIII, the capital requirement for hail risk in a particular region r shall be the larger of the following capital requirements:

(a)

the capital requirement for hail risk in region r according to scenario A;

(b)

the capital requirement for hail risk in region r according to scenario B.

3.   For all regions set out in Annex VIII, the capital requirement for hail risk in a particular region r according to scenario A shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 70 % of the specified hail loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 50 % of the specified hail loss in region r.

4.   For all regions set out in Annex VIII, the capital requirement for hail risk in a particular region r according to scenario B shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following sequence of events:

(a)

an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 100 % of the specified hail loss in region r;

(b)

a loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 20 % of the specified hail loss in region r.

5.   For all regions set out in Annex VIII, the specified hail loss in a particular region r shall be equal to the following amount:

Formula

where:

(a)

Q(hail,r) denotes the hail risk factor for region r as set out in Annex VIII;

(b)

the sum includes all possible combinations of risk zones (i,j) of region r set out in Annex IX;

(c)

Corr(hail,r,i,j) denotes the correlation coefficient for hail risk in risk zones i and j of region r set out in Annex XXV;

(d)

WSI(hail,r,i) and WSI(hail,r,j) denote the weighted sums insured for hail risk in risk zones i and j of region r set out in Annex IX.

6.   For all regions set out in Annex VIII and all risk zones of those regions set out in Annex IX, the weighted sum insured for hail risk in a particular hail zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

W(hail,r,i) denotes the risk weight for hail risk in risk zone i of region r set out in Annex X;

(b)

SI(hail,r,i) denotes the sum insured for hail risk in hail zone i of region r.

7.   For all regions set out in Annex VIII and all hail zones, the sum insured for hail risk in a particular hail zone i of a particular region r shall be equal to the following:

Formula

where:

(a)

SI(property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 7 and 19 as set out in Annex I in relation to contracts that cover hail risk, where the risk is situated in risk zone i of region r;

(b)

SI(onshore-property,r,i) denotes the sum insured by the insurance or reinsurance undertaking for lines of business 6 and 18 as set out in Annex I in relation to contracts that cover onshore property damage by hail, where the risk is situated in risk zone i of region r;

(c)

SI(motor,r,i) denotes the sum insured by the insurance or reinsurance undertaking for insurance or reinsurance obligations for lines of business 5 and 17 as set out in Annex I in relation to contracts that cover hail risk, where the risk is situated in risk zone i of region r.

8.   The capital requirement for hail risk in regions other than those set out in Annex XIII, shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss in relation to each insurance and reinsurance contract that covers one or more of the following insurance or reinsurance obligations:

(a)

obligations of lines of business 7 or 19 as set out in Annex I that cover hail risk, where the risk is not situated in one of the regions set out in Annex XIII;

(b)

obligations of lines of business 6 or 18 as set out in Annex I in relation to onshore property damage by hail, where the risk is not situated in one of the regions set out in Annex XIII;

(c)

obligations of lines of business 5 or 17 as set out in Annex I that cover hail risk, where the risk is not situated in one of the regions set out in Annex XIII.

9.   The amount of the instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, referred to in paragraph 8 shall be equal to the following amount:

Formula

where:

(a)

DIVhail is calculated in accordance with Annex III, but based on the premiums in relation to the obligations referred to in points (a), (b) and (c) of paragraph 8 and restricted to the regions 5 to 18 set out in Annex III;

(b)

Phail is an estimate of the premiums to be earned by the insurance or reinsurance undertaking for each contract that covers the obligations referred to in points (a), (b) and (c) of paragraph 8 during the following 12 months: for this purpose premiums shall be gross, without deduction of premiums for reinsurance contracts.

Article 125

Subsidence risk sub-module

1.   The capital requirement for subsidence risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following:

Formula

where:

(a)

the sum includes all possible combinations of risk zones (i,j) of France set out in Annex IX;

(b)

Corr(subsidence,i,j) denotes the correlation coefficient for subsidence risk in risk zones i and j set out in Annex XXVI;

(c)

WSI(subsidence,i) and WSI(subsidence,j) denote the weighted sums insured for subsidence risk in risk zones i and j of France set out in Annex IX.

2.   For all subsidence zones the weighted sum insured for subsidence risk in a particular risk zone i of France set out in the Annex IX shall be equal to the following:

Formula

where:

(a)

W(subsidence,i) denotes the risk weight for subsidence risk in risk zone i set out in Annex X;

(b)

SI(subsidence,i) denotes the sum insured of the insurance or reinsurance undertaking for lines of business 7 and 19 as set out in Annex I in relation to contracts that cover subsidence risk of residential buildings in subsidence zone i.

Article 126

Interpretation of catastrophe scenarios

1.   For the purposes of Article 121(3) and (4), Article 123(3) and (4) and Article 124(3) and (4), insurance and reinsurance undertakings shall base the calculation of the capital requirement on the following assumptions:

(a)

the two consecutive events referred to in those Articles are independent;

(b)

insurance and reinsurance undertakings do not enter into new insurance risk mitigation techniques between the two events.

2.   Notwithstanding point (d) of Article 83(1), where current reinsurance contracts allow for reinstatements, insurance and reinsurance undertakings shall take into account future management actions in relation to the reinstatements between the first and the second event. The assumptions about future management actions shall be realistic, objective and verifiable.

Article 127

Sub-module for catastrophe risk of non-proportional property reinsurance

1.   The capital requirement for catastrophe risk of non-proportional property reinsurance shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss in relation to each reinsurance contract that covers reinsurance obligations of line of business 28 as set out in Annex I other than non-proportional reinsurance obligations relating to insurance obligations included in lines of business 9 and 21 set out in Annex I.

2.   The amount of the instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, referred to in paragraph 1 shall be equal to the following:

Formula

where:

(a)

DIVnpproperty is calculated in accordance with Annex III, but based on the premiums earned by the insurance and reinsurance undertaking in line of business 28 as set out in Annex I, other than non-proportional reinsurance obligations relating to insurance obligations included in lines of business 9 and 21 as set out in Annex I;

(b)

Pproperty is an estimate of the premiums to be earned by the insurance or reinsurance undertaking during the following 12 months for each contract that covers the reinsurance obligations of line of business 28 as set out in Annex I other than non-proportional reinsurance obligations relating to insurance obligations included in lines of business 9 and 21 as set out in Annex I: for this purpose premiums shall be gross, without deduction of premiums for reinsurance contracts.

Article 128

Man-made catastrophe risk sub-module

1.   The man-made catastrophe risk sub-module shall consist of all of the following sub-modules:

(a)

the motor vehicle liability risk sub-module;

(b)

the marine risk sub-module;

(c)

the aviation risk sub-module;

(d)

the fire risk sub-module;

(e)

the liability risk sub-module;

(f)

the credit and suretyship risk sub-module.

2.   The capital requirement for the man-made catastrophe risk shall be equal to the following:

Formula

where:

(a)

the sum includes all sub-modules set out in paragraph 1;

(b)

SCRi denotes the capital requirements for sub-module i.

Article 129

Motor vehicle liability risk sub-module

1.   The capital requirement for motor vehicle liability risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following amount in euro:

Formula

where:

(a)

Na is the number of vehicles insured by the insurance or reinsurance undertaking in lines of business 4 and 16 as set out in Annex I with a deemed policy limit above EUR 24 000 000;

(b)

Nb is the number of vehicles insured by the insurance or reinsurance undertaking in lines of business 4 and 16 as set out in Annex I with a deemed policy limit below or equal to EUR 24 000 000.

The number of motor vehicles covered by the proportional reinsurance obligations of the insurance or reinsurance undertaking shall be weighted by the relative share of the undertaking's obligations in respect of the sum insured of the motor vehicles.

2.   The deemed policy limit referred to in paragraph 1 shall be the overall limit of the motor vehicle liability insurance policy or, where no such overall limit is specified in the terms and conditions of the policy, the sum of the limits for damage to property and for personal injury. Where the policy limit is specified as a maximum per victim, the deemed policy limit shall be based on the assumption of ten victims.

Article 130

Marine risk sub-module

1.   The capital requirement for marine risk shall be equal to the following:

Formula

where:

(a)

SCRtanker is the capital requirement for the risk of a tanker collision;

(b)

SCRplatform is the capital requirement for the risk of a platform explosion.

2.   The capital requirement for the risk of a tanker collision shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following:

Image

where:

(a)

the maximum relates to all oil and gas tankers insured by the insurance or reinsurance undertaking in respect of tanker collision in lines of business 6, 18 and 27 set out in Annex I;

(b)

SI(hull,t) is the sum insured by the insurance or reinsurance undertaking for marine hull insurance and reinsurance in relation to tanker t;

(c)

SI(liab,t) is the sum insured by the insurance or reinsurance undertaking for marine liability insurance and reinsurance in relation to tanker t;

(d)

SI(pollution,t) is the sum insured by the insurance or reinsurance undertaking for oil pollution insurance and reinsurance in relation to tanker t.

3.   The capital requirement for the risk of a platform explosion shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following:

Image

where:

(a)

the maximum relates to all oil and gas offshore platforms insured by the insurance or reinsurance undertaking in respect of platform explosion in lines of business 6, 18 and 27 set out in Annex I;

(b)

SIp is the accumulated sum insured by the insurance or reinsurance undertaking for the following insurance and reinsurance obligations in relation to platform p:

(i)

obligations to compensate for property damage;

(ii)

obligations to compensate for the expenses for the removal of wreckage;

(iii)

obligations to compensate for loss of production income;

(iv)

obligations to compensate for the expenses for capping of the well or making the well secure;

(v)

liability insurance and reinsurance obligations.

Article 131

Aviation risk sub-module

The capital requirement for aviation risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following:

Image

where:

(a)

the maximum relates to all aircrafts insured by the insurance or reinsurance undertaking in lines of business 6, 18 and 27 set out in Annex I;

(b)

SIa is the sum insured by the insurance or reinsurance undertaking for aviation hull insurance and reinsurance and aviation liability insurance and reinsurance in relation to aircraft a.

Article 132

Fire risk sub-module

1.   The capital requirement for fire risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the sum insured by the insurance or reinsurance undertaking with respect to the largest fire risk concentration.

2.   The largest fire risk concentration of an insurance or reinsurance undertaking is the set of buildings with the largest sum insured that meets all of the following conditions:

(a)

the insurance or reinsurance undertaking has insurance or reinsurance obligations in lines of business 7 and 19 set out in Annex I, in relation to each building which cover damage due to fire or explosion, including as a result of terrorist attacks;

(b)

all buildings are partly or fully located within a radius of 200 meters.

3.   For the purposes of paragraph 2, the set of buildings may be covered by one or several insurance or reinsurance contracts.

Article 133

Liability risk sub-module

1.   The capital requirement for liability risk shall be equal to the following:

Formula

where:

(a)

the sum includes all possible combinations of liability risk groups (i,j) as set out in Annex XI;

(b)

Corr(liability,i,j) denotes the correlation coefficient for liability risk of liability risk groups i and j as set out in Annex XI;

(c)

SCR(liability,i) denotes the capital requirement for liability risk of liability risk group i.

2.   For all liability risk groups set out in Annex XI the capital requirement for liability risk of a particular liability risk group i shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to the following:

Formula

where:

(a)

f(liability,i) denotes the risk factor for liability risk group i as set out in Annex XI;

(b)

P(liability,i) denotes the premiums earned by the insurance or reinsurance undertaking during the following 12 months in relation to insurance and reinsurance obligations in liability risk group i; for this purpose premiums shall be gross, without deduction of premiums for reinsurance contracts.

3.   The calculation of the loss in basic own funds referred to in paragraph 2 shall be based on the following assumptions:

(a)

the loss of liability risk group i is caused by ni claims and the losses caused by these claims are representative for the business of the insurance or reinsurance undertaking in liability risk group i and sum up to the loss of liability risk group i;

(b)

the number of claims ni is equal to the lowest integer that exceeds the following amount:

Formula

where:

(i)

f(liability,i) and P(liability,i) are defined as in paragraph 2;

(ii)

Lim(i,1) denotes the largest liability limit of indemnity provided by the insurance or reinsurance undertaking in liability risk group i;

(c)

where the insurance or reinsurance undertaking provides unlimited cover in liability risk group i, the number of claims ni is equal to one.

Article 134

Credit and suretyship risk sub-module

1.   The capital requirement for credit and suretyship risk shall be equal to the following:

Formula

where:

(a)

SCRdefault is the capital requirement for the risk of a large credit default;

(b)

SCRrecession is the capital requirement for recession risk.

2.   The capital requirement for the risk of a large credit default shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous default of the two largest exposures relating to obligations included in the lines of business 9 and 21of an insurance or reinsurance undertaking. The calculation of the capital requirement shall be based on the assumption that the loss-given-default, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, of each exposure is 10 % of the sum insured in relation to the exposure.

3.   The two largest credit insurance exposures referred to in paragraph 2 shall be determined based on a comparison of the net loss-given-default of the credit insurance exposures, being the loss-given-default after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles.

4.   The capital requirement for recession risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss of an amount that, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, is equal to 100 % of the premiums earned by the insurance or reinsurance undertaking during the following 12 months in lines of business 9 and 21.

Article 135

Sub-module for other non-life catastrophe risk

The capital requirement for other non-life catastrophe risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous loss, without deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, that is equal to the following amount:

Formula

where:

(a)

P 1, P 2, P 3, P 4 and P 5 denote estimates of the gross premium, without deduction of the amounts recoverable from reinsurance contracts, expected to be earned by the insurance or reinsurance undertaking during the following 12 months in relation to the groups of insurance and reinsurance obligations 1 to 5 set out in Annex XII;

(b)

c 1, c 2, c 3, c 4 and c 5 denote the risk factors for the groups of insurance and reinsurance obligations 1 to 5 set out in Annex XII.

SECTION 3

Life underwriting risk module

Article 136

Correlation coefficients

1.   The life underwriting risk module shall consist of all of the following sub-modules:

(a)

the mortality risk sub-module referred to in point (a) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(b)

the longevity risk sub-module referred to in point (b) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(c)

the disability-morbidity risk sub-module referred to in point (c) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(d)

the life-expense risk sub-module referred to in point (d) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(e)

the revision risk sub-module referred to in point (e) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(f)

the lapse risk sub-module referred to in point (f) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC;

(g)

the life-catastrophe risk sub-module referred to in point (g) of subparagraph 2 of Article 105(3) of Directive 2009/138/EC.

2.   The capital requirement for life underwriting risk shall be equal to the following:

Formula

where:

(a)

the sum covers all possible combinations (i,j) of the sub-modules set out in paragraph 1;

(b)

CorrNL(i,j) denotes the correlation parameter for life underwriting risk for sub-modules i and j;

(c)

SCRi and SCRj denote the capital requirements for risk sub-module i and j respectively.

3.   The correlation coefficient Corri,j referred to in point 3 of Annex IV of Directive 2009/138/EC shall be equal to the item set out in row i and in column j of the following correlation matrix:

j

i

Mortality

Longevity

Disability

Life expense

Revision

Lapse

Life catastrophe

Mortality

1

– 0,25

0,25

0,25

0

0

0,25

Longevity

– 0,25

1

0

0,25

0,25

0,25

0

Disability

0,25

0

1

0,5

0

0

0,25

Life expense

0,25

0,25

0,5

1

0,5

0,5

0,25

Revision

0

0,25

0

0,5

1

0

0

Lapse

0

0,25

0

0,5

0

1

0,25

Life catastrophe

0,25

0

0,25

0,25

0

0,25

1

Article 137

Mortality risk sub-module

1.   The capital requirement for mortality risk referred to in Article 105(3)(a) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent increase of 15 % in the mortality rates used for the calculation of technical provisions

2.   The increase in mortality rates referred to in paragraph 1 shall only apply to those insurance policies for which an increase in mortality rates leads to an increase in technical provisions without the risk margin. The identification of insurance policies for which an increase in mortality rates leads to an increase in technical provisions without the risk margin may be based on the following assumptions:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under an increase of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance obligations, the identification of the policies for which technical provisions increase under an increase of mortality rates shall apply to the underlying insurance policies only and shall be carried out in accordance with paragraph 2.

Article 138

Longevity risk sub-module

1.   The capital requirement for longevity risk referred to in Article 105(3)(b) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent decrease of 20 % in the mortality rates used for the calculation of technical provisions.

2.   The decrease in mortality rates referred to in paragraph 1 shall only apply to those insurance policies for which a decrease in mortality rates leads to an increase in technical provisions without the risk margin. The identification of insurance policies for which a decrease in mortality rates leads to an increase in technical provisions without the risk margin may be based on the following assumptions:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under a decrease of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance obligations, the identification of the policies for which technical provisions increase under a decrease of mortality rates shall apply to the underlying insurance policies only and shall be carried out in accordance with paragraph 2.

Article 139

Disability-morbidity risk sub-module

The capital requirement for disability-morbidity risk referred to in Article 105(3)(c) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the combination of the following instantaneous permanent changes:

(a)

an increase of 35 % in the disability and morbidity rates which are used in the calculation of technical provisions to reflect the disability and morbidity experience in the following 12 months;

(b)

an increase of 25 % in the disability and morbidity rates which are used in the calculation of technical provisions to reflect the disability and morbidity experience for all months after the following 12 months;

(c)

a decrease of 20 % in the disability and morbidity recovery rates used in the calculation of technical provisions in respect of the following 12 months and for all years thereafter.

Article 140

Life-expense risk sub-module

The capital requirement for life-expense risk referred to in Article 105(3)(d) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the combination of the following instantaneous permanent changes:

(a)

an increase of 10 % in the amount of expenses taken into account in the calculation of technical provisions;

(b)

an increase of 1 percentage point to the expense inflation rate (expressed as a percentage) used for the calculation of technical provisions.

With regard to reinsurance obligations, insurance and reinsurance undertakings shall apply those changes to their own expenses and, where relevant, to the expenses of the ceding undertakings.

Article 141

Revision risk sub-module

The capital requirement for revision risk referred to in Article 105(3)(e) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent increase of 3 % in the amount of annuity benefits only on annuity insurance and reinsurance obligations where the benefits payable under the underlying insurance policies could increase as a result of changes in the legal environment or in the state of health of the person insured.

Article 142

Lapse risk sub-module

1.   The capital requirement for lapse risk referred to in Article 105(3)(f) of Directive 2009/138/EC shall be equal to the largest of the following capital requirements:

(a)

the capital requirement for the risk of a permanent increase in lapse rates;

(b)

the capital requirement for the risk of a permanent decrease in lapse rates;

(c)

the capital requirement for mass lapse risk.

2.   The capital requirement for the risk of a permanent increase in lapse rates shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent increase of 50 % in the option exercise rates of the relevant options set out in paragraphs 4 and 5. Nevertheless, the increased option exercise rates shall not exceed 100 % and the increase in option exercise rates shall only apply to those relevant options for which the exercise of the option would result in an increase of technical provisions without the risk margin.

3.   The capital requirement for the risk of a permanent decrease in lapse rates shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent decrease of 50 % in the option exercise rates of the relevant options set out in paragraph 4 and 5. Nevertheless, the decrease in option exercise rates shall not exceed 20 percentage points and the decrease in option exercise rates shall only apply to those relevant options for which the exercise of the option would result in a decrease of technical provisions without the risk margin.

4.   The relevant options for the purposes of paragraphs 2 and 3 shall be the following:

(a)

all legal or contractual policyholder rights to fully or partly terminate, surrender, decrease, restrict or suspend insurance cover or permit the insurance policy to lapse;

(b)

all legal or contractual policyholder rights to fully or partially establish, renew, increase, extend or resume the insurance or reinsurance cover.

For the purposes of point (b), the change in the option exercise rate referred to in paragraphs 2 and 3 shall be applied to the rate reflecting that the relevant option is not exercised.

5.   In relation to reinsurance contracts the relevant options for the purposes of paragraph 2 and 3 shall be the following:

(a)

the rights referred to in paragraph 4 of the policy holders of the reinsurance contracts;

(b)

the rights referred to in paragraph 4 of the policy holders of the insurance contracts underlying the reinsurance contracts;

(c)

where the reinsurance contracts covers insurance or reinsurance contracts that will be written in the future, the right of the potential policy holders not to conclude those insurance or reinsurance contracts.

6.   The capital requirement for mass lapse risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from a combination of the following instantaneous events:

(a)

the discontinuance of 70 % of the insurance policies falling within the scope of operations referred to with Article 2(3)(b)(iii) and (iv) of Directive 2009/138/EC, for which discontinuance would result in an increase of technical provisions without the risk margin and where one of the following conditions are met:

(i)

the policyholder is not a natural person and discontinuance of the policy is not subject to approval by the beneficiaries of the pension fund;

(ii)

the policyholder is a natural person acting for the benefit of the beneficiaries of the policy, except where there is a family relationship between that natural person and the beneficiaries, or where the policy is effected for private estate planning or inheritance purposes and the number of beneficiaries under the policy does not exceed 20;

(b)

the discontinuance of 40 % of the insurance policies other than those falling within point (a) for which discontinuance would result in an increase of technical provisions without the risk margin;

(c)

where reinsurance contracts cover insurance or reinsurance contracts that will be written in the future, the decrease of 40 % of the number of those future insurance or reinsurance contracts used in the calculation of technical provisions.

The events referred to in the first subparagraph shall apply uniformly to all insurance and reinsurance contracts concerned. In relation to reinsurance contracts, the event referred to in point (a) shall apply to the underlying insurance contracts.

For the purposes of determining the loss in basic own funds of the insurance or reinsurance undertaking under the events referred to in points (a) and (b) the undertaking shall base the calculation on the type of discontinuance which most negatively affects the basic own funds of the undertaking on a per policy basis.

7.   Where the largest of the capital requirements referred to in points (a), (b) and (c) of paragraph 1 of this Article and the largest of the corresponding capital requirements calculated in accordance with Article 206(2) of this Regulation are not based on the same scenario, the capital requirement for lapse risk referred to in Article 105(3)(f) of Directive 2009/138/EC shall be the capital requirement referred to in points (a), (b) and (c) of paragraph 1 of this Article for which the underlying scenario results in the largest corresponding capital requirement calculated in accordance with Article 206(2) of this Regulations.

Article 143

Life-catastrophe risk sub-module

1.   The capital requirement for life-catastrophe risk referred to in Article 105(3)(g) of Directive 2009/138/EC shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous increase of 0.15 percentage points to the mortality rates (expressed as percentages) which are used in the calculation of technical provisions to reflect the mortality experience in the following 12 months.

2.   The increase in mortality rates referred to in paragraph 1 shall only apply to those insurance policies for which an increase in mortality rates which are used to reflect the mortality experience in the following 12 months leads to an increase in technical provisions. The identification of insurance policies for which an increase in mortality rates leads to an increase in technical provisions without the risk margin may be based on the following assumptions:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under an increase of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance policies, the identification of the policies for which technical provisions increase under an increase of mortality rates shall apply to the underlying insurance policies only and shall be carried out in accordance with paragraph 2.

SECTION 4

Health underwriting risk module

Article 144

Health underwriting risk module

1.   The health underwriting risk module shall consist of all of the following sub-modules:

(a)

the NSLT health insurance underwriting risk sub-module;

(b)

the SLT health insurance underwriting risk sub-module;

(c)

the health catastrophe risk sub-module.

2.   The capital requirement for health underwriting risk shall be equal to the following:

Formula

where:

(a)

the sum covers all possible combinations (i,j) of the sub-modules set out in paragraph 1;

(b)

CorrH(i,j) denotes the correlation parameter for health underwriting risk for sub-modules i and j;

(c)

SCRi and SCRj denote the capital requirements for risk sub-module i and j respectively.

3.   The correlation coefficient CorrH(i,j) referred to in paragraph 2 denotes the item set out in row i and in column j of the following correlation matrix:

j

i

NSLT health underwriting

SLT health underwriting

Health catastrophe

NSLT health underwriting

1

0,5

0,25

SLT health underwriting

0,5

1

0,25

Health catastrophe

0,25

0,25

1

4.   Insurance and reinsurance undertakings shall apply:

(a)

the NSLT health underwriting risk sub-module to health insurance and reinsurance obligations included in lines of business 1, 2, 3, 13, 14, 15 and 25 as set out in Annex I;

(b)

the SLT health underwriting risk sub-module to health insurance and reinsurance obligations included in lines of business 29, 33 and 35 as set out in Annex I;

(c)

the health catastrophe risk sub-module to health insurance and reinsurance obligations.

Article 145

NSLT health underwriting risk sub-module

1.   The NSLT health underwriting risk sub-module shall consist of the following sub- modules:

(a)

the NSLT health premium and reserve risk sub-module;

(b)

the NSLT health lapse risk sub-module.

2.   The capital requirement for NSLT health underwriting risk shall be equal to the following:

Formula

where:

(a)

SCR(NSLTh,pr) denotes the capital requirement for NSLT health premium and reserve risk;

(b)

SCR(NSLTh,lapse) denotes the capital requirement for NSLT health lapse risk.

Article 146

NSLT health premium and reserve risk sub-module

The capital requirement for NSLT health premium and reserve risk shall be equal to the following:

Formula

where:

(a)

σNSLTh denotes the standard deviation for NSLT health premium and reserve risk determined in accordance with Article 148;

(b)

VNSLTh denotes the volume measure for NSLT health premium and reserve risk determined in accordance with Article 147.

Article 147

Volume measure for NSLT health premium and reserve risk

1.   The volume measure for NSLT health premium and reserve risk shall be equal to the sum of the volume measures for premium and reserve risk of the segments set out in Annex XIV.

2.   For all segments set out in Annex XIV, the volume measure of a particular segment s shall be equal to the following:

Formula

where:

(a)

V(prem,s) denotes the volume measure for premium risk of segment s;

(b)

V(res,s) denotes the volume measure for reserve risk of segment s;

(c)

DIVs denotes the factor for geographical diversification of segment s.

3.   For all segments set out in Annex XIV, the volume measure for premium risk of a particular segment s shall be equal to the following:

Formula

where:

(a)

Ps denotes an estimate of the premiums to be earned by the insurance or reinsurance undertaking in the segment s during the following 12 months;

(b)

P(last,s) denotes the premiums earned by the insurance and reinsurance undertaking in the segment s during the last 12 months;

(c)

FP(existing,s) denotes the expected present value of premiums to be earned by the insurance and reinsurance undertaking in the segment s after the following 12 months for existing contracts;

(d)

FP(future,s) denotes the expected present value of premiums to be earned by the insurance and reinsurance undertaking in the segment s for contracts where the initial recognition date falls in the following 12 months but excluding the premiums to be earned during the 12 months after the initial recognition date.

4.   For all segments set out in Annex XIV, insurance and reinsurance undertakings may, as an alternative to the calculation set out in paragraph 3, choose to calculate the volume measure for premium risk of a particular segment s in accordance with the following formula:

Formula

provided that all of the following conditions are met:

(a)

the administrative, management or supervisory body of the insurance or reinsurance undertaking has decided that its earned premiums in the segment s during the following 12 months will not exceed Ps ;

(b)

the insurance or reinsurance undertaking has established effective control mechanisms to ensure that the limits on earned premiums referred to in point (a) will be met;

(c)

the insurance or reinsurance undertaking has informed its supervisory authority about the decision referred to in point (a) and the reasons for it.

For the purposes of this paragraph, the terms Ps , FP(existing,s) and FP(future,s) shall be denoted in accordance with points (a), (c) and (d) of paragraph 3.

5.   For the purposes of the calculations set out in paragraphs 3 and 4, premiums shall be net, after deduction of premiums for reinsurance contracts. The following premiums for reinsurance contracts shall not be deducted:

(a)

premiums in relation to non-insurance events or settled insurance claims that are not accounted for in the cash-flows referred to in Article 41(3);

(b)

premiums for reinsurance contracts that do not comply with Articles 209, 210, 211 and 213.

6.   For all segments set out in Annex XIV, the volume measure for reserve risk of a particular segment shall be equal to the best estimate for the provision for claims outstanding for the segment, after deduction of the amounts recoverable from reinsurance contracts and special purpose vehicles, provided that the reinsurance contracts or special purpose vehicles comply with Articles 209, 210, 211 and 213. The volume measure shall not be a negative amount.

7.   For all segments set out in Annex XIV, the default factor for geographical diversification shall be either equal to 1 or calculated in accordance with Annex III.

Article 148

Standard deviation for NSLT health premium and reserve risk

1.   The standard deviation for NSLT health premium and reserve risk shall be equal to the following:

Formula

where:

(a)

VNSLTh denotes the volume measure for NSLT health premium and reserve risk;

(b)

the sum covers all possible combinations (s,t) of the segments set out in Annex XIV;

(c)

CorrHS(s,t) denotes the correlation coefficient for NSLT health premium and reserve risk for segment s and segment t set out in Annex XV;

(d)

σs and σt denote standard deviations for NSLT health premium and reserve risk of segments s and t respectively;

(e)

Vs and Vt denote volume measures for premium and reserve risk of segments s and t, referred to in Annex XIV, respectively.

2.   For all segments set out in Annex XIV, the standard deviation for NSLT health premium and reserve risk of a particular segment s shall be equal to the following:

Formula

where:

(a)

σ(prem,s) denotes the standard deviation for NSLT health premium risk of segment s determined in accordance with paragraph 3;

(b)

σ(res,s) denotes the standard deviation for NSLT health reserve risk of segment s as set out in Annex XIV;

(c)

V(prem,s) denotes the volume measure for premium risk of segment s referred to in Article 147;

(d)

V(res,s) denotes the volume measure for reserve risk of segment s referred to in Article 147.

3.   For all segments set out in Annex XIV, the standard deviation for NSLT health premium risk of a particular segment shall be equal to the product of the standard deviation for NSLT health gross premium risk of the segment set out in Annex XIV and the adjustment factor for non-proportional reinsurance. For all segments set out in Annex XIV the adjustment factor for non-proportional reinsurance shall be equal to 100 %.

Article 149

Health risk equalisation systems

1.   For the purposes of Article 109a(4) of Directive 2009/138/EC, health insurance obligations subject to the health risk equalisation systems (‘HRES’) shall be identified, managed and organised separately from the other activities of the insurance undertakings, without any possibility of transfer to health insurance obligations that are not subject to HRES.

2.   The standard deviations for NSLT health premium and reserve risk of segments 1, 2 and 3 in Annex XIV for business that is subject to a HRES shall meet all of the following requirements:

(a)

the standard deviations are determined separately for each of the segments 1, 2 and 3, as set out in Annex XIV, and separately for premium and reserve risk;

(b)

for each of the segments set out in Annex XIV, the standard deviation for premium risk is the lower of the following amounts:

(i)

the standard deviation for NSLT health premium risk of that segment set out in Annex XIV;

(ii)

the higher of the following amounts:

A.

a third of the standard deviation for NSLT health premium risk of that segment set out in Annex XIV;

B.

an estimate of the representative standard deviation of an insurance undertaking's combined ratio, being the ratio of the following annual amounts:

the sum of the payments, including the relating expenses, and technical provisions set up for claims incurred during the year for the business subject to the HRES, including any changes due to the HRES;

the earned premium of the year for the business subject to the HRES;

(c)

for each of the segments set out in Annex XIV, the standard deviation for reserve risk is the lower of the following amounts:

(i)

the standard deviation for NSLT health reserve risk of that segment set out in Annex XIV;

(ii)

the higher of the following amounts;

A.

a third of the standard deviation for NSLT health reserve risk of that segment set out in Annex XIV:

B.

an estimate of the representative standard deviation of an insurance undertaking's run-off ratio, being the ratio of the following annual amounts:

the sum of the best estimate provision at the end of the year for claims that were outstanding at the beginning of the year and any claims and expense payments made during the year for claims that were outstanding at the beginning of the year: both amounts include any amendments due to the HRES;

the best estimate provision at the beginning of the year for claims outstanding of the business subject to the HRES, including any amendments due to the HRES;

(d)

the determination of the standard deviation is based on adequate, applicable and relevant actuarial and statistical techniques;

(e)

the determination of the standard deviation is based on complete, accurate and appropriate data that is directly relevant for the business subject to the HRES and reflects the average degree of diversification at the level of insurance undertakings;

(f)

the determination of the standard deviation is based on current and credible information and realistic assumptions;

(g)

the determination of the standard deviation also takes into account any risks which are not mitigated by the HRES, in particular the risk referred to in Article 105(4)(a) of Directive 2009/138/EC and risks which are not reflected in the health catastrophe risk sub-module and that could affect a larger number of insurance undertakings subject to the HRES at the same time;

(h)

the methodology for the calculation of the standard deviation and the calculation of the standard deviation is publicly available.

3.   Where the implementing act adopted pursuant to Article 109a(4) of Directive 2009/138/EC determine a standard deviation for NSLT health insurance premium risk for business subject to a HRES that meet the requirements set out in paragraph 2 of this Article, insurance undertakings shall use this standard deviation instead of the standard deviation for NSLT health premium risk of the segment set out in Annex XIV of this Regulation for the calculation of the standard deviation for NSLT health premium and reserve risk referred to in Article 148(1) of this Regulation.

Where only a part of an insurance undertaking's business in a segment s is subject to the HRES, the undertaking shall use a standard deviation for NSLT health premium risk of the segment in the calculation of the standard deviation for NSLT health premium and reserve risk referred to in Article 148(1) that is equal to the following:

Formula

where:

(a)

σ(prem,s) denotes the standard deviation for NSLT health premium risk segment s set out in Annex XIV;

(b)

V(prem,s,nHRES) denotes the volume measure for NSLT health premium risk of the business in segment s that is not subject to the HRES;

(c)

σ(prem,s,HRES) denotes the standard deviation for NSLT health premium risk of segment s for business subject to the HRES calculated in accordance with paragraph 2;

(d)

V(prem,s,HRES) denotes the volume measure for NSLT health premium risk of business in segment s that is subject to the HRES.

V(prem,s,HRES) and V(prem,s,nHRES) shall be calculated in the same way as the volume measure for NSLT health premium risk of segment s referred to in Article 147, but V(prem,s,HRES) shall only take into account the insurance and reinsurance obligations subject to HRES and V(prem,s,nHRES) shall only take into account the insurance and reinsurance obligations not subject to the HRES.

4.   Where the implementing act adopted pursuant to Article 109a(4) of Directive 2009/138/EC determine a standard deviation for NSLT health insurance reserve risk for business subject to a HRES that fulfill the requirements set out in paragraph 2 of this Article, insurance undertakings shall use this standard deviation instead of the standard deviation for NSLT health reserve risk of the segment set out in Annex XIV of this Regulation for the calculation of the standard deviation for NSLT health premium and reserve risk referred to in Article 148(1) of this Regulation.

Where only a part of an insurance undertaking's business in a segment s is subject to the HRES, the undertaking shall use a standard deviation for NSLT health premium risk of the segment in the calculation of the standard deviation for NSLT health premium and reserve risk referred to in Article 148(1) that is equal to the following:

Formula

where:

(a)

σ(res,s) denotes the standard deviation for NSLT health reserve risk segment s as set out in Annex XIV;

(b)

V(res,s,nHRES) denotes the volume measure for NSLT health reserve risk of the business in segment s that is not subject to the HRES;

(c)

σ(res,s,HRES) denotes the standard deviation for NSLT health reserve risk of segment s for business subject to the HRES calculated in accordance with paragraph 2;

(d)

V(res,s,HRES) denotes the volume measure for NSLT health reserve risk of business in segment s that is subject to the HRES.

V(res,s,nHRES) and V(res,s,HRES) shall be calculated in the same way as the volume measure for NSLT health reserve risk of segment s referred to in Article 147, but V(res,s,HRES) shall only take into account the insurance and reinsurance obligations subject to the HRES and V(res,s,nHRES) shall only take into account the insurance and reinsurance obligations not subject to the HRES.

5.   Insurance and reinsurance undertakings may replace the standard deviations for NSLT health premium and reserve risk for business subject to a HRES with parameters specific to the insurance and reinsurance undertaking in accordance with Article 104(7) of Directive 2009/138/EC. Supervisory authorities may require insurance and reinsurance undertakings to replace those standard deviations with parameters specific to the undertaking in accordance with Article 110 of that Directive 2009/138/EC.

Article 150

NSLT health lapse risk sub-module

1.   The capital requirement for NSLT health lapse risk referred to in Article 145(1)(b) shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the combination of the following instantaneous events:

(a)

the discontinuance of 40 % of the insurance policies for which discontinuance would result in an increase of technical provisions without the risk margin;

(b)

where reinsurance contracts cover insurance or reinsurance contracts that will be written in the future, the decrease of 40 % of the number of those future insurance or reinsurance contracts used in the calculation of technical provisions.

2.   The events referred to in paragraph 1 shall apply uniformly to all insurance and reinsurance contracts concerned. In relation to reinsurance contracts the event referred to in point (a) of paragraph 1 shall apply to the underlying insurance contracts.

3.   For the purposes of determining the loss in basic own funds of the insurance or reinsurance undertaking under the event referred to in point (a) of paragraph 1, the undertaking shall base the calculation on the type of discontinuance which most negatively affects the basic own funds of the undertaking on a per policy basis.

Article 151

SLT health underwriting risk sub-module

1.   The SLT health underwriting risk module shall consist of all of the following sub-modules:

(a)

the health mortality risk sub-module;

(b)

the health longevity risk sub-module;

(c)

the health disability-morbidity risk sub-module;

(d)

the health expense risk sub-module;

(e)

the health revision risk sub-module;

(f)

the SLT health lapse risk sub-module.

2.   The capital requirement for SLT health underwriting risk shall be equal to the following:

Formula

where:

(a)

the sum denotes all possible combinations (i,j) of the sub-modules set out in paragraph 1;

(b)

CorrSLTH(i,j) denotes the correlation parameter for SLT health underwriting risk for sub-modules i and j;

(c)

SCRi and SCRj denote the capital requirements for risk sub-module i and j respectively.

3.   The correlation coefficient CorrSLTH(i,j) referred to in paragraph 2 shall be equal to the item set out in row i and in column j of the following correlation matrix:

j

i

Health mortality

Health longevity

Health disability-morbidity

Health expense

Health revision

SLT health lapse

Health mortality

1

– 0,25

0,25

0,25

0

0

Health longevity

– 0,25

1

0

0,25

0,25

0,25

Health disability-morbidity

0,25

0

1

0,5

0

0

Health expense

0,25

0,25

0,5

1

0,5

0,5

Health revision

0

0,25

0

0,5

1

0

SLT health lapse

0

0,25

0

0,5

0

1

Article 152

Health mortality risk sub-module

1.   The capital requirement for health mortality risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent increase of 15 % in the mortality rates used for the calculation of technical provisions.

2.   The increase in mortality rates referred to in paragraph 1 shall only apply to those insurance policies for which an increase in mortality rates leads to an increase in technical provisions without the risk margin. The identification of insurance policies for which an increase in mortality rates leads to an increase in technical provisions without the risk margin may be based on the following:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under an increase of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance obligations, the identification of the policies for which technical provisions increase under an increase of mortality rates shall apply to the underlying insurance policies only and shall be carried out in accordance with paragraph 2.

Article 153

Health longevity risk sub-module

1.   The capital requirement for health longevity risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent decrease of 20 % in the mortality rates used for the calculation of technical provisions.

2.   The decrease in mortality rates referred to in paragraph 1 shall only apply to those insurance policies for which a decrease in mortality rates leads to an increase in technical provisions without the risk margin. The identification of insurance policies for which a decrease in mortality rates leads to an increase in technical provisions without the risk margin may be based on the following assumptions:

(a)

multiple insurance policies in respect of the same insured person may be treated as if they were one insurance policy;

(b)

where the calculation of technical provisions is based on groups of policies as referred to in Article 35, the identification of the policies for which technical provisions increase under an decrease of mortality rates may also be based on those groups of policies instead of single policies, provided that it yields a result which is not materially different.

3.   With regard to reinsurance obligations, the identification of the policies for which technical provisions increase under an decrease of mortality rates shall apply only to the underlying insurance policies and shall be carried out in accordance with paragraph 2.

Article 154

Health disability-morbidity risk sub-module

1.   The capital requirement for health disability-morbidity risk shall be equal to the sum of the following:

(a)

the capital requirement for medical expense disability-morbidity risk;

(b)

the capital requirement for income protection disability-morbidity risk.

2.   Insurance and reinsurance undertakings shall apply:

(a)

the scenarios underlying the calculation of the capital requirement for medical expense disability-morbidity risk only to medical expense insurance and reinsurance obligations where the underlying business is pursued on a similar technical basis to that of life insurance;

(b)

the scenarios underlying the calculation of the capital requirement for income protection disability-morbidity risk only to income protection insurance and reinsurance obligations where the underlying business is pursued on a similar technical basis to that of life insurance.

Article 155

Capital requirement for medical expense disability-morbidity risk

1.   The capital requirement for medical expense disability-morbidity risk shall be equal to the larger of the following capital requirements:

(a)

the capital requirement for the increase of medical payments;

(b)

the capital requirement for the decrease of medical payments.

2.   The capital requirement for the increase of medical payments shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following combination of instantaneous permanent changes:

(a)

an increase of 5 % in the amount of medical payments taken into account in the calculation of technical provisions;

(b)

an increase by 1 percentage point to the inflation rate of medical payments (expressed as a percentage) used for the calculation of technical provisions.

3.   The capital requirement for the decrease of medical payments shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following combination of instantaneous permanent changes:

(a)

a decrease of 5 % in the amount of medical payments taken into account in the calculation of technical provisions;

(b)

a decrease by 1 percentage point from the inflation rate of medical payments (expressed as a percentage) used for the calculation of technical provisions.

Article 156

Capital requirement for income protection disability-morbidity risk

The capital requirement for income protection disability-morbidity risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following combination of instantaneous permanent changes:

(a)

an increase of 35 % in the disability and morbidity rates which are used in the calculation of technical provisions to reflect the disability and morbidity in the following 12 months;

(b)

an increase of 25 % in the disability and morbidity rates which are used in the calculation of technical provisions to reflect the disability and morbidity in the years after the following 12 months;

(c)

where the disability and morbidity recovery rates used in the calculation of technical provisions are lower than 50 %, a decrease of 20 % in those rates;

(d)

where the disability and morbidity persistency rates used in the calculation of technical provisions are equal or lower than 50 %, an increase of 20 % in those rates.

Article 157

Health expense risk sub-module

The capital requirement for health expense risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from the following combination of instantaneous permanent changes:

(a)

an increase of 10 % in the amount of expenses taken into account in the calculation of technical provisions;

(b)

an increase by 1 percentage point to the expense inflation rate (expressed as a percentage) used for the calculation of technical provisions.

With regard to reinsurance obligations, insurance and reinsurance undertakings shall apply those changes to their own expenses and, where relevant, to the expenses of the ceding undertakings.

Article 158

Health revision risk sub-module

The capital requirement for health revision risk shall be equal to the loss in basic own funds of insurance and reinsurance undertakings that would result from an instantaneous permanent increase of 4 % in the amount of annuity benefits, only on annuity insurance and reinsurance obligations where the benefits payable under the underlying insurance policies could increase as a result of changes in inflation, the legal environment or the state of health of the person insured.

Article 159

SLT health lapse risk sub-module

1.   The capital requirement for SLT health lapse risk referred to in Article 151(1)(f) shall be equal to the largest of the following capital requirements:

(a)

capital requirement for the risk of a permanent increase in SLT health lapse rates;

(b)

capital requirement for the risk of a permanent decrease in SLT health lapse rates;

(c)

capital requirement for SLT health mass lapse risk.

2.   The capital requirement for the risk of a permanent increase