13.12.2006   

EN

Official Journal of the European Union

C 304/1


Commission communication in the framework of the implementation of the Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products

(Text with EEA relevance)

(Publication of titles and references of harmonised standards under the Directive)

(2006/C 304/01)

European standardisation organisation (1)

Reference and title of the harmonised standard (3)

Reference of superseded standard

Date of applicability of the standard as a harmonised European standard

Date of the end of the coexistence period (2)

CEN

EN 40-4:2005

1.10.2006

1.10.2007

Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns

 

 

 

EN 40-4:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 40-5:2002

1.2.2003

1.2.2005

Lighting columns — Part 5: Requirements for steel lighting columns

 

 

 

CEN

EN 40-6:2002

1.2.2003

1.2.2005

Lighting columns — Part 6: Requirements for aluminium lighting columns

 

 

 

CEN

EN 40-7:2002

1.10.2003

1.10.2004

Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns

 

 

 

CEN

EN 54-3:2001

 

Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders

 

 

 

EN 54-3:2001/A1:2002

 

1.4.2003

30.6.2005

EN 54-3:2001/A2:2006

 

1.3.2007

1.6.2009

CEN

EN 54-4:1997

 

Fire detection and fire alarm systems — Part 4: Power supply equipment

 

 

 

EN 54-4:1997/A1:2002

 

1.10.2003

31.12.2007

EN 54-4:1997/A2:2006

 

1.6.2007

1.6.2008

EN 54-4:1997/AC:1999

 

1.6.2005

1.6.2005

CEN

EN 54-5:2000

 

Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors

 

 

 

EN 54-5:2000/A1:2002

 

1.4.2003

30.6.2005

CEN

EN 54-7:2000

 

Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization

 

 

 

EN 54-7:2000/A1:2002

 

1.4.2003

30.6.2005

EN 54-7:2000/A2:2006

 

1.5.2007

1.8.2009

CEN

EN 54-10:2002

1.9.2006

1.9.2008

Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors

 

 

 

EN 54-10:2002/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-11:2001

1.9.2006

1.9.2008

Fire detection and fire alarm systems — Part 11: Manual call points

 

 

 

EN 54-11:2001/A1:2005

 

1.9.2006

1.9.2008

CEN

EN 54-12:2002

1.10.2003

31.12.2005

Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam

 

 

 

CEN

EN 54-17:2005

1.10.2006

1.12.2008

Fire detection and fire alarm systems — Part 17: Short-circuit isolators

 

 

 

CEN

EN 54-18:2005

1.10.2006

1.12.2008

Fire detection and fire alarm systems — Part 18: Input/output devices

 

 

 

CEN

EN 54-20:2006

1.4.2007

1.7.2009

Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors

 

 

 

CEN

EN 54-21:2006

1.3.2007

1.6.2009

Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment

 

 

 

CEN

EN 179:1997

 

Building hardware — Emergency exit devices operated by a lever handle or push pad — Requirements and test methods

 

 

 

EN 179:1997/A1:2001

 

1.4.2002

1.4.2003

EN 179:1997/A1:2001/AC:2002

 

1.6.2005

1.6.2005

CEN

EN 197-1:2000

1.4.2001

1.4.2002

Cement — Part 1: Composition, specifications and conformity criteria for common cements

 

 

 

EN 197-1:2000/A1:2004

 

1.2.2005

1.2.2006

CEN

EN 197-4:2004

1.2.2005

1.2.2006

Cement — Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements

 

 

 

CEN

EN 295-10:2005

1.1.2006

1.1.2007

Vitrified clay pipes and fittings and pipe joints for drains and sewers — Part 10: Performance requirements

 

 

 

CEN

EN 413-1:2004

1.12.2004

1.12.2005

Masonry cement — Part 1: Composition, specifications and conformity criteria

 

 

 

CEN

EN 438-7:2005

1.11.2005

1.11.2006

High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

 

 

 

CEN

EN 442-1:1995

 

Radiators and convectors — Part 1: Technical specifications and requirements

 

 

 

EN 442-1:1995/A1:2003

 

1.12.2004

1.12.2005

CEN

EN 450-1:2005

1.1.2006

1.1.2007

Fly ash for concrete — Part 1: Definition, specifications and conformity criteria

 

 

 

CEN

EN 459-1:2001

1.8.2002

1.8.2003

Building lime — Part 1: Definitions, specifications and conformity criteria

 

 

 

CEN

EN 490:2004

1.9.2005

1.6.2007

Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications

 

 

 

CEN

EN 492:2004

1.1.2006

1.1.2007

Fibre-cement slates and fittings — Product specification and test methods

 

 

 

EN 492:2004/A1:2005

 

1.1.2006

1.1.2007

EN 492:2004/A2:2005

 

1.7.2007

1.7.2008

CEN

EN 494:2004

1.1.2006

1.1.2008

Fibre-cement profiled sheets and fittings — Product specification and test methods

 

 

 

EN 494:2004/A1:2005

 

1.1.2006

1.1.2007

EN 494:2004/A2:2006

 

1.7.2007

1.7.2008

CEN

EN 516:2006

1.11.2006

1.11.2007

Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps

 

 

 

CEN

EN 517:2006

1.12.2006

1.12.2007

Prefabricated accessories for roofing — Roof safety hooks

 

 

 

CEN

EN 520:2004

1.9.2005

1.3.2007

Gypsum plasterboards — Definitions, requirements and test methods

 

 

 

CEN

EN 523:2003

1.6.2004

1.6.2005

Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control

 

 

 

CEN

EN 534:2006

1.4.2007

1.4.2008

Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods

 

 

 

CEN

EN 544:2005

1.10.2006

1.10.2007

Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods

 

 

 

CEN

EN 572-9:2004

1.9.2005

1.9.2006

Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard

 

 

 

CEN

EN 588-2:2001

1.10.2002

1.10.2003

Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers

 

 

 

CEN

EN 671-1:2001

1.2.2002

1.4.2004

Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose

 

 

 

EN 671-1:2001/AC:2002

 

1.1.2007

1.1.2007

CEN

EN 671-2:2001

1.2.2002

1.4.2004

Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose

 

 

 

EN 671-2:2001/A1:2004

 

1.3.2007

1.3.2008

CEN

EN 681-1:1996

 

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

 

 

 

EN 681-1:1996/A1:1998

 

 

EN 681-1:1996/A2:2002

 

1.1.2003

1.1.2004

CEN

EN 681-2:2000

 

Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

 

 

 

EN 681-2:2000/A1:2002

 

1.1.2003

1.1.2004

CEN

EN 681-3:2000

 

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber

 

 

 

EN 681-3:2000/A1:2002

 

1.1.2003

1.1.2004

CEN

EN 681-4:2000

 

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements

 

 

 

EN 681-4:2000/A1:2002

 

1.1.2003

1.1.2004

CEN

EN 682:2002

1.10.2002

1.12.2003

Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

 

 

 

CEN

EN 771-1:2003

(1.12.2004)

 

Specification for masonry units — Part 1: Clay masonry units

 

1.4.2005

1.4.2006

EN 771-1:2003/A1:2005

 

1.4.2005

1.4.2006

CEN

EN 771-2:2003

EN 771-2:2000

(1.12.2004)

 

Specification for masonry units — Part 2: Calcium silicate masonry units

 

1.4.2005

1.4.2006

EN 771-2:2003/A1:2005

 

1.4.2005

1.4.2006

CEN

EN 771-3:2003

(1.12.2004)

 

Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)

 

1.4.2005

1.4.2006

EN 771-3:2003/A1:2005

 

1.4.2005

1.4.2006

CEN

EN 771-4:2003

(1.12.2004)

 

Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units

 

1.4.2005

1.4.2006

EN 771-4:2003/A1:2005

 

1.4.2005

1.4.2006

CEN

EN 771-5:2003

(1.3.2005)

 

Specification for masonry units — Part 5: Manufactured stone masonry units

 

1.4.2005

1.4.2006

EN 771-5:2003/A1:2005

 

1.4.2005

1.4.2006

CEN

EN 771-6:2005

1.8.2006

1.8.2007

Specification for masonry units — Part 6: Natural stone masonry units

 

 

 

CEN

EN 845-1:2003

1.2.2004

1.2.2005

Specification for ancillary components for masonry — Part 1: Ties, tension straps, hangers and brackets

 

 

 

CEN

EN 845-2:2003

1.2.2004

1.4.2006

Specification for ancillary components for masonry — Part 2: Lintels

 

 

 

CEN

EN 845-3:2003

1.2.2004

1.2.2005

Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork

 

 

 

CEN

EN 858-1:2002

1.9.2005

1.9.2006

Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control

 

 

 

EN 858-1:2002/A1:2004

 

1.9.2005

1.9.2006

CEN

EN 934-2:2001

1.5.2002

1.5.2003

Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling

 

 

 

EN 934-2:2001/A1:2004

 

1.7.2005

1.7.2005

EN 934-2:2001/A2:2005

 

1.10.2006

1.10.2007

CEN

EN 934-3:2003

1.6.2005

1.6.2006

Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity, marking and labelling

 

 

 

EN 934-3:2003/AC:2005

 

1.6.2005

1.6.2005

CEN

EN 934-4:2001

1.5.2002

1.5.2003

Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling

 

 

 

CEN

EN 997:2003

1.12.2004

1.12.2006

WC pans and WC suites with integral trap

 

 

 

CEN

EN 998-1:2003

1.2.2004

1.2.2005

Specification for mortar for masonry — Part 1: Rendering and plastering mortar

 

 

 

EN 998-1:2003/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 998-2:2003

1.2.2004

1.2.2005

Specification for mortar for masonry — Part 2: Masonry mortar

 

 

 

CEN

EN 1057:2006

1.3.2007

1.3.2008

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications

 

 

 

CEN

EN 1096-4:2004

1.9.2005

1.9.2006

Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard

 

 

 

CEN

EN 1123-1:1999

1.6.2005

1.6.2006

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

 

 

EN 1123-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1124-1:1999

1.6.2005

1.6.2006

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

 

 

EN 1124-1:1999/A1:2004

 

1.6.2005

1.6.2006

CEN

EN 1125:1997

 

Building hardware — Panic exit devices operated by a horizontal bar — Requirements and test methods

 

 

 

EN 1125:1997/A1:2001

 

1.4.2002

1.4.2003

EN 1125:1997/A1:2001/AC:2002

 

1.6.2005

1.6.2005

CEN

EN 1154:1996

 

Building hardware — Controlled door closing devices — Requirements and test methods

 

 

 

EN 1154:1996/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1155:1997

 

Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods

 

 

 

EN 1155:1997/A1:2002

 

1.10.2003

1.10.2004

CEN

EN 1158:1997

 

Building hardware — Door coordinator devices — Requirements and test methods

 

 

 

EN 1158:1997/A1:2002

 

1.10.2003

1.10.2004

EN 1158:1997/A1:2002/AC:2006

 

1.6.2006

1.6.2006

CEN

EN 1168:2005

1.3.2006

1.3.2008

Precast concrete products — Hollow core slabs

 

 

 

CEN

EN 1279-5:2005

1.3.2006

1.3.2007

Glass in building — Insulating glass units — Part 5: Evaluation of conformity

 

 

 

CEN

EN 1304:2005

1.2.2006

1.2.2007

Clay roofing tiles and fittings — Product definitions and specifications

 

 

 

CEN

EN 1337-3:2005

1.1.2006

1.1.2007

Structural bearings — Part 3: Elastomeric bearings

 

 

 

CEN

EN 1337-4:2004

1.2.2005

1.2.2006

Structural bearings — Part 4: Roller bearings

 

 

 

CEN

EN 1337-5:2005

1.1.2006

1.1.2007

Structural bearings — Part 5: Pot bearings

 

 

 

CEN

EN 1337-6:2004

1.2.2005

1.2.2006

Structural bearings — Part 6: Rocker bearings

 

 

 

CEN

EN 1337-7:2004

EN 1337-7:2000

1.12.2004

1.6.2005

Structural bearings — Part 7: Spherical and cylindrical PTFE bearings

 

 

 

CEN

EN 1338:2003

1.3.2004

1.3.2005

Concrete paving blocks — Requirements and test methods

 

 

 

EN 1338:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1339:2003

1.3.2004

1.3.2005

Concrete paving flags — Requirements and test methods

 

 

 

EN 1339:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1340:2003

1.2.2004

1.2.2005

Concrete kerb units — Requirements and test methods

 

 

 

EN 1340:2003/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1341:2001

1.10.2002

1.10.2003

Slabs of natural stone for external paving — Requirements and test methods

 

 

 

CEN

EN 1342:2001

1.10.2002

1.10.2003

Setts of natural stone for external paving — Requirements and test methods

 

 

 

CEN

EN 1343:2001

1.10.2002

1.10.2003

Kerbs of natural stone for external paving — Requirements and test methods

 

 

 

CEN

EN 1344:2002

1.1.2003

1.1.2004

Clay pavers — Requirements and test methods

 

 

 

CEN

EN 1423:1997

 

Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two

 

 

 

EN 1423:1997/A1:2003

 

1.5.2004

1.5.2005

CEN

EN 1433:2002

1.8.2003

1.8.2004

Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity

 

 

 

EN 1433:2002/A1:2005

 

1.1.2006

1.1.2006

CEN

EN 1457:1999

 

Chimneys — Clay/Ceramic Flue Liners — Requirements and test methods

 

 

 

EN 1457:1999/A1:2002

 

1.8.2003

1.8.2004

EN 1457:1999/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1463-1:1997

 

Road marking materials — Retroflecting road studs — Part 1: Initial performance requirements

 

 

 

EN 1463-1:1997/A1:2003

 

1.12.2004

1.12.2006

CEN

EN 1469:2004

1.7.2005

1.7.2006

Natural stone products — Slabs for cladding — Requirements

 

 

 

CEN

EN 1504-2:2004

1.9.2005

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete

 

 

 

CEN

EN 1504-3:2005

1.10.2006

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair

 

 

 

CEN

EN 1504-4:2004

1.9.2005

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding

 

 

 

CEN

EN 1504-5:2004

1.10.2005

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection

 

 

 

CEN

EN 1504-6:2006

1.6.2007

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar

 

 

 

CEN

EN 1504-7:2006

1.6.2007

1.1.2009

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection

 

 

 

CEN

EN 1520:2002

1.9.2003

1.9.2004

Prefabricated reinforced components of lightweight aggregate concrete with open structure

 

 

 

CEN

EN 1748-1-2:2004

1.9.2005

1.9.2006

Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 1748-2-2:2004

1.9.2005

1.9.2006

Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 1806:2006

1.5.2007

1.5.2008

Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods

 

 

 

CEN

EN 1825-1:2004

1.9.2005

1.9.2006

Grease separators — Part 1: Principles of design, performance and testing, marking and quality control

 

 

 

EN 1825-1:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 1856-1:2003

1.4.2004

1.4.2005

Chimneys — Requirements for metal chimneys — Part 1: System chimney products

 

 

 

EN 1856-1:2003/A1:2006

 

1.3.2007

1.3.2008

CEN

EN 1856-2:2004

1.5.2005

1.11.2007

Chimneys — Requirements for metal chimneys — Part 2: Metal liners and connecting flue pipes

 

 

 

CEN

EN 1857:2003

1.5.2004

1.5.2005

Chimneys — Components — Concrete flue liners

 

 

 

EN 1857:2003/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 1858:2003

1.5.2004

1.5.2005

Chimneys — Components — Concrete flue blocks

 

 

 

CEN

EN 1863-2:2004

1.9.2005

1.9.2006

Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 1873:2005

1.10.2006

1.10.2009

Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods

 

 

 

CEN

EN 1916:2002

1.8.2003

23.11.2004

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

 

 

 

EN 1916:2002/AC:2003

 

1.1.2007

1.1.2007

CEN

EN 1917:2002

1.8.2003

23.11.2004

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

 

 

 

EN 1917:2002/AC:2003

 

1.1.2007

1.1.2007

CEN

EN 1935:2002

1.10.2002

1.12.2003

Building hardware — Single-axis hinges — Requirements and test methods

 

 

 

EN 1935:2002/AC:2003

 

1.1.2007

1.1.2007

CEN

EN 10025-1:2004

1.9.2005

1.9.2006

Hot rolled products of structural steels — Part 1: General technical delivery conditions

 

 

 

CEN

EN 10210-1:2006

1.2.2007

1.2.2008

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

 

 

 

CEN

EN 10219-1:2006

1.2.2007

1.2.2008

Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

 

 

 

CEN

EN 10224:2002

1.4.2006

1.4.2007

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

 

 

EN 10224:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 10311:2005

1.3.2006

1.3.2007

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids

 

 

 

CEN

EN 103122002

1.4.2006

1.4.2007

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

 

 

EN 10312:2002/A1:2005

 

1.4.2006

1.4.2007

CEN

EN 12004:2001

 

Adhesives for tiles — Definitions and specifications

 

 

 

EN 12004:2001/A1:2002

 

1.4.2003

1.4.2004

EN 12004:2001/A1:2002/AC:2002

 

1.6.2005

1.6.2005

CEN

EN 12050-1:2001

1.11.2001

1.11.2002

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter

 

 

 

CEN

EN 12050-2:2000

1.10.2001

1.10.2002

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater

 

 

 

CEN

EN 12050-3:2000

1.10.2001

1.10.2002

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications

 

 

 

CEN

EN 12050-4:2000

1.10.2001

1.10.2002

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter

 

 

 

CEN

EN 12057:2004

1.9.2005

1.9.2006

Natural stone products — Modular tiles — Requirements

 

 

 

CEN

EN 12058:2004

1.9.2005

1.9.2006

Natural stone products — Slabs for floors and stairs — Requirements

 

 

 

CEN

EN 12094-1 2003

1.2.2004

1.5.2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices

 

 

 

CEN

EN 12094-2:2003

1.2.2004

1.5.2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices

 

 

 

CEN

EN 12094-3:2003

1.1.2004

1.9.2005

Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices

 

 

 

CEN

EN 12094-4:2004

1.5.2005

1.8.2007

Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators

 

 

 

CEN

EN 12094-5:2006

EN 12094-5:2000

1.2.2007

1.2.2008

Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems

 

 

 

CEN

EN 12094-6:2006

EN 12094-6:2000

1.2.2007

1.2.2008

Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems

 

 

 

CEN

EN 12094-7:2000

1.10.2001

1.4.2004

Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems

 

 

 

EN 12094-7:2000/A1:2005

 

1.11.2005

1.11.2006

CEN

EN 12094-8:2006

1.2.2007

1.5.2009

Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors

 

 

 

CEN

EN 12094-9:2003

1.1.2004

1.9.2005

Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors

 

 

 

CEN

EN 12094-10:2003

1.2.2004

1.5.2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches

 

 

 

CEN

EN 12094-11:2003

1.1.2004

1.9.2005

Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices

 

 

 

CEN

EN 12094-12:2003

1.1.2004

1.9.2005

Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices

 

 

 

CEN

EN 12094-13:2001

1.1.2002

1.4.2004

Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves

 

 

 

CEN

EN 12101-1:2005

1.6.2006

1.9.2008

Smoke and heat control systems — Part 1: Specification for smoke barriers

 

 

 

EN 12101-1:2005/A1:2006

 

1.12.2006

1.9.2008

CEN

EN 12101-2:2003

1.4.2004

1.9.2006

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators

 

 

 

CEN

EN 12101-3:2002

1.4.2004

1.4.2005

Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators

 

 

 

EN 12101-3:2002/AC:2005

 

1.1.2006

1.1.2006

CEN

EN 12101-6:2005

1.4.2006

1.4.2007

Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits

 

 

 

EN 12101-6:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12101-10:2005

1.10.2006

1.1.2009

Smoke and heat control systems — Part 10: Power supplies

 

 

 

CEN

EN 12150-2:2004

1.9.2005

1.9.2006

Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 12209:2003

1.12.2004

1.6.2006

Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods

 

 

 

EN 12209:2003/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 12259-1:1999 + A1:2001

1.4.2002

1.9.2005

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers

 

 

 

EN 12259-1:1999 + A1:2001/A2:2004

 

1.3.2005

1.3.2006

EN 12259-1:1999 + A1:2001/A3:2006

 

1.11.2006

1.11.2007

CEN

EN 12259-2:1999

 

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies

 

 

 

EN 12259-2:1999/A1:2001

 

1.1.2002

1.8.2007

EN 12259-2:1999/A2:2005

 

1.9.2006

1.8.2007

EN 12259-2:1999/AC:2002

 

1.6.2005

1.6.2005

CEN

EN 12259-3:2000

 

Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies

 

 

 

EN 12259-3:2000/A1:2001

 

1.1.2002

1.8.2007

EN 12259-3:2000/A2:2005

 

1.9.2006

1.8.2007

CEN

EN 12259-4:2000

 

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms

 

 

 

EN 12259-4:2000/A1:2001

 

1.1.2002

1.4.2004

CEN

EN 12259-5:2002

1.7.2003

1.9.2009

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors

 

 

 

CEN

EN 12285-2:2005

1.1.2006

1.1.2008

Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

 

 

 

CEN

EN 12326-1:2004

1.5.2005

1.5.2008

Slate and stone products for discontinuous roofing and cladding — Part 1: Product specification

 

 

 

CEN

EN 12337-2:2004

1.9.2005

1.9.2006

Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 12352:2006

1.2.2007

1.2.2008

Traffic control equipment — Warning and safety light devices

 

 

 

CEN

EN 12368:2006

1.2.2007

1.2.2008

Traffic control equipment — Signal heads

 

 

 

CEN

EN 12380:2002

1.10.2003

1.10.2004

Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity

 

 

 

CEN

EN 12416-1:2001

1.1.2002

1.4.2004

Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components

 

 

 

EN 12416-1:2001/A1:2004

 

1.6.2005

1.6.2005

CEN

EN 12416-2:2001

1.4.2002

1.4.2004

Fixed firefighting systems — Powder systems — Part 2: Design, construction and maintenance

 

 

 

CEN

EN 12446:2003

1.2.2004

1.2.2005

Chimneys — Components — Concrete outer wall elements

 

 

 

CEN

EN 12467:2004

1.1.2006

1.1.2007

Fibre-cement flat sheets — Product specification and test methods

 

 

 

EN 12467:2004/A1:2005

 

1.1.2006

1.1.2007

EN 12467:2004/A2:2006

 

1.7.2007

1.7.2008

CEN

EN 12566-1:2000

 

Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks

 

 

 

EN 12566-1:2000/A1:2003

 

1.12.2004

1.12.2005

CEN

EN 12566-3:2005

1.5.2006

1.7.2008

Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants

 

 

 

CEN

EN 12620:2002

1.7.2003

1.6.2004

Aggregates for concrete

 

 

 

CEN

EN 12676-1:2000

 

Anti-glare systems for roads — Part 1: Performance and characteristics

 

 

 

EN 12676-1:2000/A1:2003

 

1.2.2004

1.2.2006

CEN

EN 12764:2004

1.10.2005

1.10.2007

Sanitary appliances — Specification for whirlpool baths

 

 

 

CEN

EN 12794:2005

1.1.2006

1.1.2008

Precast concrete products — Foundation piles

 

 

 

CEN

EN 12809:2001

1.7.2005

1.7.2007

Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods

 

 

 

EN 12809:2001/A1:2004

 

1.7.2005

1.7.2007

EN 12809:2001/AC:2006

 

1.1.2007

1.1.2007

EN 12809:2001/A1:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12815:2001

1.7.2005

1.7.2007

Residential cookers fired by solid fuel — Requirements and test methods

 

 

 

EN 12815:2001/A1:2004

 

1.7.2005

1.7.2007

EN 12815:2001/AC:2006

 

1.1.2007

1.1.2007

EN 12815:2001/A1:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12839:2001

1.3.2002

1.3.2003

Precast concrete products — Elements for fences

 

 

 

CEN

EN 12843:2004

1.9.2005

1.9.2007

Precast concrete products — Masts and poles

 

 

 

CEN

EN 12859:2001

1.4.2002

1.4.2003

Gypsum blocks — Definitions, requirements and test methods

 

 

 

EN 12859:2001/A1:2004

 

1.6.2005

1.6.2005

CEN

EN 12860:2001

1.4.2002

1.4.2003

Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods

 

 

 

CEN

EN 12878:2005

1.3.2006

1.3.2007

Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test

 

 

 

EN 12878:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 12951:2004

1.9.2005

1.9.2006

Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods

 

 

 

CEN

EN 12966-1:2005

1.2.2006

1.2.2007

Road vertical signs — Variable message traffic signs — Part 1: Product standard

 

 

 

CEN

EN 13024-2:2004

1.9.2005

1.9.2006

Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 13043:2002

1.7.2003

1.6.2004

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

 

 

 

EN 13043:2002/AC:2004

 

1.6.2006

1.6.2006

CEN

EN 13055-1:2002

1.3.2003

1.6.2004

Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout

 

 

 

CEN

EN 13055-2:2004

1.5.2005

1.5.2006

Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications

 

 

 

CEN

EN 13063-1:2005

1.10.2006

1.10.2008

Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance

 

 

 

CEN

EN 13063-2:2005

1.3.2006

1.3.2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions

 

 

 

CEN

EN 13069:2005

1.5.2006

1.5.2007

Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods

 

 

 

CEN

EN 13084-5:2005

1.4.2006

1.4.2007

Free-standing chimneys — Part 5: Material for brick liners — Product specifications

 

 

 

EN 13084-5:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13084-7:2005

1.8.2006

1.8.2007

Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

 

 

 

CEN

EN 13101:2002

1.8.2003

1.8.2004

Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity

 

 

 

CEN

EN 13108-1:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete

 

 

 

CEN

EN 13108-2:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers

 

 

 

CEN

EN 13108-3:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 3: Soft Asphalt

 

 

 

CEN

EN 13108-4:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt

 

 

 

CEN

EN 13108-5:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt

 

 

 

CEN

EN 13108-6:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt

 

 

 

CEN

EN 13108-7:2006

1.3.2007

1.3.2008

Bituminous mixtures - Material specifications - Part 7: Porous Asphalt

 

 

 

CEN

EN 13139:2002

1.3.2003

1.6.2004

Aggregates for mortar

 

 

 

CEN

EN 13160-1:2003

1.3.2004

1.3.2005

Leak detection systems — Part 1: General principles

 

 

 

CEN

EN 13162:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification

 

 

 

EN 13162:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13163:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification

 

 

 

EN 13163:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13164:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification

 

 

 

EN 13164:2001/A1:2004

 

1.12.2004

1.12.2004

EN 13164:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13165:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification

 

 

 

EN 13165:2001/A1:2004

1.12.2004

1.12.2004

EN 13165:2001/A2:2004

 

1.1.2006

1.1.2007

EN 13165:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13166:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made products of phenolic foam (PF) — Specification

 

 

 

EN 13166:2001/A1:2004

1.12.2004

1.12.2004

EN 13166:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13167:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification

 

 

 

EN 13167:2001/A1:2004

1.12.2004

1.12.2004

EN 13167:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13168:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification

 

 

 

EN 13168:2001/A1:2004

1.12.2004

1.12.2004

EN 13168:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13169:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made products of expanded perlite (EPB) — Specification

 

 

 

EN 13169:2001/A1:2004

1.12.2004

1.12.2004

EN 13169:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13170:2001

1.3.2002

13.5.2003

Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification

 

 

 

EN 13170:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13171:2001

1.3.2002

13.5.2003

Thermal insulating products for buildings — Factory made wood fibre (WF) products — Specification

 

 

 

EN 13171:2001/A1:2004

1.12.2004

1.12.2004

EN 13171:2001/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 13224:2004

1.9.2005

1.9.2007

Precast concrete products — Ribbed floor elements

 

 

 

EN 13224:2004/AC:2005

 

1.6.2005

1.6.2005

CEN

EN 13225:2004

1.9.2005

1.9.2007

Precast concrete products — Linear structural elements

 

 

 

CEN

EN 13229:2001

1.7.2005

1.7.2007

Inset appliances including open fires fired by solid fuels — Requirements and test methods

 

 

 

EN 13229:2001/A1:2003

 

1.6.2006

1.6.2007

EN 13229:2001/A2:2004

 

1.7.2005

1.7.2007

EN 13229:2001/AC:2006

 

1.1.2007

1.1.2007

EN 13229:2001/A2:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13240:2001

1.7.2005

1.7.2007

Room heaters fired by solid fuel — Requirements and test methods

 

 

 

EN 13240:2001/A2:2004

 

1.7.2005

1.7.2007

EN 13240:2001/AC:2006

 

1.1.2007

1.1.2007

EN 13240:2001/A2:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13241-1:2003

1.5.2004

1.5.2005

Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics

 

 

 

CEN

EN 13242:2002

1.10.2003

1.6.2004

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

 

 

 

EN 13242:2002/AC:2004

 

1.1.2007

1.1.2007

CEN

EN 13249:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

 

 

 

EN 13249:2000/A1:2005

 

1.11.2005

1.11.2006

CEN

EN 13250:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways

 

 

 

EN 13250:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13251:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures

 

 

 

EN 13251:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13252:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in drainage systems

 

 

 

EN 13252:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13253:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)

 

 

 

EN 13253:2000/A1:2005

 

1.6.2006

1.6.2007

CEN

EN 13254:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams

 

 

 

EN 13254:2000/A1:2005

 

1.6.2006

1.6.2007

EN 13254:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13255:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals

 

 

 

EN 13255:2000/A1:2005

 

1.6.2006

1.6.2007

EN 13255:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13256:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures

 

 

 

EN 13256:2000/A1:2005

 

1.6.2006

1.6.2007

EN 13256:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13257:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals

 

 

 

EN 13257:2000/A1:2005

 

1.6.2006

1.6.2007

EN 13257:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13263-1:2005

1.4.2006

1.4.2007

Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria

 

 

 

CEN

EN 13265:2000

1.10.2001

1.10.2002

Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects

 

 

 

EN 13265:2000/A1:2005

 

1.6.2006

1.6.2007

EN 13265:2000/AC:2003

 

1.6.2006

1.6.2006

CEN

EN 13279-1:2005

1.4.2006

1.4.2007

Gypsum binders and gypsum plasters — Part 1: Definitions and requirements

 

 

 

CEN

EN 13310:2003

1.2.2004

1.2.2006

Kitchen sinks — Functional requirements and test methods

 

 

 

CEN

EN 13341:2005

1.1.2006

1.1.2009

Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks — Requirements and test methods

 

 

 

CEN

EN 13361:2004

1.9.2005

1.9.2006

Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams

 

 

 

EN 13361:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13362:2005

1.2.2006

1.2.2007

Geosynthetic Barriers — Characteristics required for use in the construction of canals

 

 

 

CEN

EN 13383-1:2002

1.3.2003

1.6.2004

Armourstone — Part 1: Specification

 

 

 

CEN

EN 13450:2002

1.10.2003

1.6.2004

Aggregates for railway ballast

 

 

 

EN 13450:2002/AC:2004

 

1.1.2007

1.1.2007

CEN

EN 13454-1:2004

1.7.2005

1.7.2006

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements

 

 

 

CEN

EN 13479:2004

1.10.2005

1.10.2006

Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials

 

 

 

CEN

EN 13491:2004

1.9.2005

1.9.2006

Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

 

 

 

EN 13491:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13492:2004

1.9.2005

1.9.2006

Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

 

 

 

EN 13492:2004/A1:2006

 

1.6.2007

1.6.2008

CEN

EN 13493:2005

1.3.2006

1.3.2007

Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites

 

 

 

CEN

EN 13502:2002

1.8.2003

1.8.2004

Chimneys — Requirements and test methods for clay/ceramic flue terminals

 

 

 

CEN

EN 13561:2004

1.3.2005

1.3.2006

External blinds — Performance requirements including safety

 

 

 

CEN

EN 13564-1:2002

1.5.2003

1.5.2004

Anti-flooding devices for buildings — Part 1: Requirements

 

 

 

CEN

EN 13565-1:2003

1.12.2004

1.3.2008

Fixed firefighting systems — Foam systems — Part 1: Requirements and test methods for components

 

 

 

CEN

EN 13616:2004

1.5.2005

1.5.2006

Overfill prevention devices for static tanks for liquid petroleum fuels

 

 

 

EN 13616:2004/AC:2006

 

1.6.2006

1.6.2006

CEN

EN 13658-1:2005

1.3.2006

1.3.2007

Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering

 

 

 

CEN

EN 13658-2:2005

1.3.2006

1.3.2007

Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

 

 

 

CEN

EN 13659:2004

1.4.2005

1.4.2006

Shutters — Performance requirements including safety

 

 

 

CEN

EN 13693:2004

1.6.2005

1.6.2007

Precast concrete products — Special roof elements

 

 

 

CEN

EN 13707:2004

1.9.2005

1.9.2006

Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics

 

 

 

CEN

EN 13747:2005

1.5.2006

1.5.2008

Precast concrete products — Floor plates for floor systems

 

 

 

CEN

EN 13748-1:2004

1.6.2005

1.10.2006

Terrazzo tiles — Part 1: Terrazzo tiles for internal use

 

 

 

EN 13748-1:2004/A1:2005

 

1.4.2006

1.10.2006

EN 13748-1:2004/AC:2005

 

1.6.2005

1.6.2005

CEN

EN 13748-2:2004

1.4.2005

1.4.2006

Terrazzo tiles — Part 2: Terrazzo tiles for external use

 

 

 

CEN

EN 13813:2002

1.8.2003

1.8.2004

Screed material and floor screeds — Screed material — Properties and requirements

 

 

 

CEN

EN 13815:2006

1.6.2007

1.6.2008

Fibrous gypsum plaster casts - Definitions, requirements and test methods

 

 

 

CEN

EN 13830:2003

1.12.2004

1.12.2005

Curtain walling — Product standard

 

 

 

CEN

EN 13859-1:2005

1.1.2006

1.1.2007

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing

 

 

 

CEN

EN 13859-2:2004

1.9.2005

1.9.2006

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls

 

 

 

CEN

EN 13877-3:2004

1.9.2005

1.9.2006

Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements

 

 

 

CEN

EN 13950:2005

1.9.2006

1.9.2007

Gypsum plasterboard thermal/acoustic insulation composite panels — Definitions, requirements and test methods

 

 

 

CEN

EN 13956:2005

1.7.2006

1.7.2007

Flexible sheet for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics

 

 

 

EN 13956:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13963:2005

1.3.2006

1.3.2007

Jointing materials for gypsum plasterboards — Definitions, requirements and test methods

 

 

 

EN 13963:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 13964:2004

1.1.2005

1.7.2007

Suspended ceilings — Requirements and test methods

 

 

 

CEN

EN 13967:2004

1.10.2005

1.10.2006

Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics

 

 

 

CEN

EN 13969:2004

1.9.2005

1.9.2006

Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics

 

 

 

CEN

EN 13970:2004

1.9.2005

1.9.2006

Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics

 

 

 

CEN

EN 13978-1:2005

1.3.2006

1.3.2008

Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions

 

 

 

CEN

EN 13984:2004

1.9.2005

1.9.2006

Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics

 

 

 

CEN

EN 13986:2004

EN 13986:2002

1.6.2005

1.6.2006

Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking

 

 

 

CEN

EN 14016-1:2004

1.12.2004

1.12.2005

Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements

 

 

 

CEN

EN 14037-1:2003

1.2.2004

1.2.2005

Ceiling mounted radiant panels supplied with water at temperature below 120 C — Part 1: Technical specifications and requirements

 

 

 

CEN

EN 14041:2004

(1.6.2005)

 

Resilient, textile and laminate floor coverings — Essential characteristics

 

1.1.2006

1.1.2007

EN 14041:2004/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14063-1:2004

1.6.2005

1.6.2006

Thermal insulation materials and products — In-situ formed expanded clay lightweight aggregate products (LWA) — Part 1: Specification for the loose-fill products before installation

 

 

 

CEN

EN 14080:2005

1.4.2006

1.4.2009

Timber structures — Glued laminated timber — Requirements

 

 

 

CEN

EN 14081-1:2005

1.9.2006

1.9.2007

Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements

 

 

 

CEN

EN 14178-2:2004

1.9.2005

1.9.2006

Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 14179-2:2005

1.3.2006

1.3.2007

Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 14188-1:2004

1.7.2005

1.1.2007

Joint fillers and sealants — Part 1: Specifications for hot applied sealants

 

 

 

CEN

EN 14188-2:2004

1.10.2005

1.1.2007

Joint fillers and sealants — Part 2: Specifications for cold applied sealants

 

 

 

CEN

EN 14188-3:2006

1.11.2006

1.11.2007

Joint fillers and sealants — Part 3: Specifications for preformed joint seals

 

 

 

CEN

EN 14190:2005

1.4.2006

1.4.2007

Gypsum plasterboard products from reprocessing — Definitions, requirements and test methods

 

 

 

CEN

EN 14195:2005

1.1.2006

1.1.2007

Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods

 

 

 

EN 14195:2005/AC:2006

 

1.1.2007

1.1.2007

CEN

EN 14209:2005

1.9.2006

1.9.2007

Preformed plasterboard cornices — Definitions, requirements and test methods

 

 

 

CEN

EN 14216:2004

1.2.2005

1.2.2006

Cement — Composition, specifications and conformity criteria for very low heat special cements

 

 

 

CEN

EN 14246:2006

1.4.2007

1.4.2008

Gypsum elements for suspended ceilings - Definitions, requirements and test methods

 

 

 

CEN

EN 14250:2004

1.9.2005

1.6.2008

Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners

 

 

 

CEN

EN 14296:2005

1.3.2006

1.3.2008

Sanitary appliances — Communal washing troughs

 

 

 

CEN

EN 14316-1:2004

1.6.2005

1.6.2006

Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

 

 

CEN

EN 14317-1:2004

1.6.2005

1.6.2006

Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

 

 

CEN

EN 14321-2:2005

1.6.2006

1.6.2007

Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

 

 

CEN

EN 14339:2005

1.5.2006

1.5.2007

Underground fire hydrants

 

 

 

CEN

EN 14342:2005

1.3.2006

1.3.2008

Wood flooring — Characteristics, evaluation of conformity and marking

 

 

 

CEN

EN 14351-1:2006

1.2.2007

1.2.2009

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

 

 

 

CEN

EN 14374:2004

1.9.2005

1.9.2006

Timber structures — Structural laminated veneer lumber — Requirements

 

 

 

CEN

EN 14384:2005

1.5.2006

1.5.2007

Pillar fire hydrants

 

 

 

CEN

EN 14388:2005

1.5.2006

1.5.2007

Road traffic noise reducing devices — Specifications

 

 

 

CEN

EN 14396:2004

1.12.2004

1.12.2005

Fixed ladders for manholes

 

 

 

CEN

EN 14399-1:2005

1.1.2006

1.10.2007

High-strength structural bolting assemblies for preloading — Part 1: General requirements

 

 

 

CEN

EN 14411:2003

1.12.2004

1.12.2005

Ceramic tiles — Definitions, classification, characteristics and marking (ISO 13006:1998, modified)

 

 

 

CEN

EN 14428:2004

1.9.2005

1.9.2007

Shower enclosures — Functional requirements and test methods

 

 

 

CEN

EN 14449:2005

1.3.2006

1.3.2007

Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard

 

 

 

EN 14449:2005/AC:2005

 

1.6.2006

1.6.2006

CEN

EN 14471:2005

1.6.2006

1.6.2007

Chimneys — System chimneys with plastic flue liners — Requirements and test methods

 

 

 

CEN

EN 14496:2005

1.9.2006

1.9.2007

Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods

 

 

 

CEN

EN 14528:2005

1.10.2006

1.10.2008

Bidets — Functional requirements and test methods

 

 

 

CEN

EN 14604:2005

1.5.2006

1.8.2008

Smoke alarm devices

 

 

 

CEN

EN 14647:2005

1.8.2006

1.8.2007

Calcium aluminate cement — Composition, specifications and conformity criteria

 

 

 

CEN

EN 14716:2004

1.10.2005

1.10.2006

Stretched ceilings — Requirements and test methods

 

 

 

CEN

EN 14782:2006

1.11.2006

1.11.2007

Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements

 

 

 

CEN

EN 14783:2006

1.7.2007

1.7.2008

Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements

 

 

 

CEN

EN 14844:2006

1.5.2007

1.5.2008

Precast concrete products — Box culverts

 

 

 

CEN

EN 14889-1:2006

1.6.2007

1.6.2008

Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity

 

 

 

CEN

EN 14889-2:2006

1.6.2007

1.6.2008

Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity

 

 

 

CEN

EN 14904:2006

1.2.2007

1.2.2008

Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification

 

 

 

CEN

EN 14909:2006

1.2.2007

1.2.2008

Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics

 

 

 

CEN

EN 14915:2006

1.6.2007

1.6.2008

Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking

 

 

 

CEN

EN 14967:2006

1.3.2007

1.3.2008

Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics

 

 

 

CEN

EN 15088:2005

1.10.2006

1.10.2007

Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery

 

 

 

Note:

Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and of the Council (4) amended by Directive 98/48/EC (5).

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages.

This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list.

More information about harmonised standards on the Internet at

http://ec.europa.eu/enterprise/newapproach/standardization/harmstds/


(1)

ESO: European Standardisation Organisation:

CEN: rue de Stassart 36, B-1050 Brussels, tel. (32-2) 550 08 11; fax (32-2) 550 08 19 (http://www.cen.eu)

CENELEC: rue de Stassart 35, B-1050 Brussels, tel. (32-2) 519 68 71; fax (32-2) 519 69 19 (http://www.cenelec.org)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, tel. (33) 492 94 42 00; fax (33) 493 65 47 16 (http://www.etsi.org)

(2)  The date of the end of the co-existence period is the same as the date of withdrawal of conflicting national technical specifications, after which presumption of conformity must be based upon harmonised European specifications (harmonised standards or European Technical Approvals).

(3)  In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment.

(4)  OJ L 204, 21.7.1998, p. 37.

(5)  OJ L 217, 5.8.1998, p. 18.