|
30.6.2005 |
EN |
Official Journal of the European Union |
L 168/1 |
COUNCIL REGULATION (EC) No 989/2005
of 27 June 2005
amending Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain industrial, agricultural and fishery products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 26 thereof,
Having regard to the proposal from the Commission,
Whereas:
|
(1) |
It is in the interest of the Community to suspend partially or totally the autonomous common customs tariff duties for a number of new products not listed in the Annex to Regulation (EC) No 1255/96 (1). |
|
(2) |
A number of products which are referred to in the said Regulation should be withdrawn from the list in the Annex because it is no longer in the Community’s interest to maintain suspension of autonomous common customs tariff duties or because the description needs to be altered in order to take account of technical product developments and economic trends on the market. |
|
(3) |
Accordingly, products whose description needs to be altered should be regarded as new products. |
|
(4) |
It is therefore appropriate to amend Regulation (EC) No 1255/96 accordingly. |
|
(5) |
In view of the economic importance of this Regulation, it is necessary to rely upon the grounds of urgency provided for in point I.3 of the Protocol annexed to the Treaty on European Union and to the Treaties establishing the European Communities on the role of national parliaments in the European Union. |
|
(6) |
Since this Regulation is to apply from 1 July 2005, it should enter into force immediately, |
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EC) No 1255/96 is hereby amended as follows:
|
1. |
The products set out in Annex I to this Regulation shall be inserted. |
|
2. |
The products for which the codes are set out in Annex II to this Regulation shall be deleted. |
Article 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply with effect from 1 July 2005.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 27 June 2005.
For the Council
The President
L. LUX
(1) OJ L 158, 29.6.1996, p. 1. Regulation as last amended by Regulation (EC) No 2271/2004 (OJ L 396, 31.12.2004, p. 13).
ANNEX I
|
CN code |
TARIC |
Description |
Rate of autonomous duty (%)′ |
||||||||||||
|
ex 2903 43 00 |
10 |
1,1,1-Trichlorotrifluoroethane |
0 |
||||||||||||
|
ex 2903 49 10 |
10 |
Chloro-1,1,1-trifluoroethane |
0 |
||||||||||||
|
ex 2904 20 00 |
50 |
2,2’-dinitro-bibenzyl |
0 |
||||||||||||
|
ex 2906 29 00 |
20 |
1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene |
0 |
||||||||||||
|
ex 2907 29 00 |
85 |
Phloroglucinol whether or not hydrated |
0 |
||||||||||||
|
ex 2909 60 00 |
10 |
Bis(α,α-dimethylbenzyl) peroxide |
0 |
||||||||||||
|
ex 2915 39 90 |
60 |
1-phenylethyl acetate |
0 |
||||||||||||
|
ex 2916 39 00 |
85 |
2,6-difluorobenzoic acid |
0 |
||||||||||||
|
ex 2920 90 10 |
40 |
Dimethyl carbonate |
0 |
||||||||||||
|
ex 2920 90 85 |
50 |
tri iso octyl phosphite |
0 |
||||||||||||
|
ex 2921 42 10 |
85 |
3,5-dichloroaniline |
0 |
||||||||||||
|
ex 2921 51 19 |
20 |
Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight |
0 |
||||||||||||
|
ex 2924 19 00 |
50 |
Acrylamide |
0 |
||||||||||||
|
ex 2924 29 95 |
91 |
3-hydroxy-2’-methoxy-2-naphthanilide |
0 |
||||||||||||
|
ex 2924 29 95 |
92 |
3-hydroxy-2-naphthanilide |
0 |
||||||||||||
|
ex 2924 29 95 |
93 |
3-hydroxy-2’-methyl-2-naphthanilide |
0 |
||||||||||||
|
ex 2924 29 95 |
94 |
2’-ethoxy-3-hydroxy-2-naphthanilide |
0 |
||||||||||||
|
ex 2924 29 95 |
96 |
4’-chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide |
0 |
||||||||||||
|
ex 2926 90 95 |
25 |
Aminoacetonitrile hydrochloride |
0 |
||||||||||||
|
ex 2926 90 95 |
35 |
2-Bromo-2(bromomethyl) pentanedinitrile |
0 |
||||||||||||
|
ex 2932 99 70 |
40 |
1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol |
0 |
||||||||||||
|
ex 2932 99 85 |
30 |
Carbofuran (ISO) |
0 |
||||||||||||
|
ex 2933 19 90 |
30 |
3-methyl-1-p. -tolyl-5-pyrazolone |
0 |
||||||||||||
|
ex 2933 39 99 |
40 |
2-chloropyridine |
0 |
||||||||||||
|
ex 2933 59 95 |
85 |
Adenine |
0 |
||||||||||||
|
ex 2933 99 90 |
88 |
2,6-dichloroquinoxaline |
0 |
||||||||||||
|
ex 2935 00 90 |
88 |
N-(2-(4-amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate |
0 |
||||||||||||
|
ex 3205 00 00 |
10 |
Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1) |
0 |
||||||||||||
|
ex 3208 90 19 |
85 |
Mixture containing by weight:
|
0 |
||||||||||||
|
ex 3402 11 90 |
10 |
Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid) |
0 |
||||||||||||
|
ex 3811 90 00 |
10 |
Dinonylnaphthylsulphonic acid salt, in the form of a solution in mineral oil, for use as an additive for distillate fuels and lubricating oils (1) |
0 |
||||||||||||
|
ex 3814 00 90 |
40 |
Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether |
0 |
||||||||||||
|
ex 3815 90 90 |
88 |
Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:
|
0 |
||||||||||||
|
ex 3815 90 90 |
89 |
Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1) |
0 |
||||||||||||
|
ex 3824 90 99 |
54 |
2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile |
0 |
||||||||||||
|
ex 3824 90 99 |
70 |
Preparation, in an aqueous solution, of tetramethylammonium hydroxide and a surfactant containing:
|
0 |
||||||||||||
|
ex 3824 90 99 |
80 |
Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate |
0 |
||||||||||||
|
ex 3824 90 99 |
97 |
Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents |
0 |
||||||||||||
|
ex 3904 69 90 |
97 |
Copolymer of chlorotrifluoroethylene and vinylidene difluoride |
0 |
||||||||||||
|
ex 3906 90 90 |
55 |
Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets |
0 |
||||||||||||
|
ex 3906 90 90 |
85 |
Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends |
0 |
||||||||||||
|
ex 3908 90 00 |
40 |
Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes (1) |
0 |
||||||||||||
|
ex 3911 90 99 |
75 |
Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm |
0 |
||||||||||||
|
ex 3926 90 99 |
75 |
||||||||||||||
|
ex 3913 90 00 |
98 |
Sodium hyaluronate |
0 |
||||||||||||
|
ex 3919 10 69 |
95 |
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet |
0 |
||||||||||||
|
ex 3919 90 69 |
98 |
||||||||||||||
|
ex 3919 90 31 |
70 |
Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters (1) |
0 |
||||||||||||
|
ex 3920 20 21 |
30 |
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm. |
0 |
||||||||||||
|
ex 3920 91 00 |
93 |
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:
for use in the manufacture of heat-reflecting or decorative laminated glass (1) |
0 |
||||||||||||
|
ex 3920 99 59 |
60 |
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 % |
0 |
||||||||||||
|
ex 3921 90 60 |
94 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm |
0 |
||||||||||||
|
ex 3926 90 99 |
15 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1) |
0 |
||||||||||||
|
ex 3926 90 99 |
25 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm |
0 |
||||||||||||
|
ex 6909 19 00 |
60 |
Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 liters, having per cm2 of the surface of the cross section one or more closed channels at the tail end |
0 |
||||||||||||
|
ex 7007 19 20 |
10 |
Glass plate of a diagonal size of 81,28 cm (+/– 1,5 cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets (1) |
0 |
||||||||||||
|
ex 7007 29 00 |
10 |
Glass plate of a diagonal size of 81,28 cm (+/– 1,5cm) or more, but not exceeding 185,42 cm (+/– 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP video monitors or television sets (1) |
0 |
||||||||||||
|
ex 8501 10 99 |
81 |
DC stepping motor, with an angle of step of 18° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 × 68 mm, a two phase winding and an output not exceeding 5 W |
0 |
||||||||||||
|
ex 8501 10 99 |
82 |
DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1 500 (± 15 %) or 6 800 (± 15 %) rpm, a supply voltage of 2 or 8 V |
0 |
||||||||||||
|
ex 8501 10 99 |
83 |
Multiphase electric motor with D.C. current, without brush, of a normal power drive of 31 W (+/– 5 W) calculated with 600 rpm (revolution per minute), equipped with electronic circuit provided with sensors using Hall effect (electric power steering motor) |
0 |
||||||||||||
|
ex 8505 11 00 |
33 |
Neodymium-magnet discs with a diameter not exceeding 90 mm, whether or not containing a hole in the centre |
0 |
||||||||||||
|
ex 8507 80 94 |
30 |
Electric lithium-ion accumulator, with:
for use in the manufacture of mobile phones (1) |
0 |
||||||||||||
|
ex 8516 90 00 |
33 |
Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1) (1) |
0 |
||||||||||||
|
ex 8516 90 00 |
35 |
Steam iron, not capable of independent operation, for use in the manufacture of steam ironing systems (1) |
0 |
||||||||||||
|
ex 8522 90 98 |
44 |
Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording |
0 |
||||||||||||
|
ex 8522 90 98 |
49 |
Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8 519 (1) |
0 |
||||||||||||
|
ex 8529 90 81 |
44 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 |
||||||||||||
|
ex 8537 10 99 |
94 |
Unit consisting of two junction field effect transistors contained in a dual lead frame housing |
0 |
||||||||||||
|
ex 8543 89 95 |
66 |
||||||||||||||
|
ex 8537 10 99 |
95 |
Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing |
0 |
||||||||||||
|
ex 8543 89 95 |
65 |
||||||||||||||
|
ex 8540 91 00 |
32 |
Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV |
0 |
||||||||||||
|
ex 8543 89 95 |
52 |
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing |
0 |
||||||||||||
|
ex 8548 90 90 |
47 |
Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a lead frame housing having a circular opening whose exterior dimensions without fittings – do not exceed 4 × 4 mm |
0 |
||||||||||||
|
ex 8548 90 90 |
48 |
Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm |
0 |
||||||||||||
|
ex 8548 90 90 |
49 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 |
||||||||||||
|
ex 9405 40 35 |
10 |
Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more, but not exceeding 600 mm (± 1 mm), for the manufacture of goods of heading 8528 (1) |
0 |
(1) Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253, 11.10.1993, p. 1)).
ANNEX II
|
Code NC |
TARIC |
|
ex 2932 11 00 |
10 |
|
ex 2933 69 80 |
10 |
|
ex 3824 90 99 |
54 |
|
ex 3907 20 99 |
25 |
|
ex 3911 90 99 |
75 |
|
ex 3926 90 99 |
75 |
|
ex 3920 91 00 |
93 |
|
ex 3920 99 59 |
60 |
|
ex 3926 90 99 |
85 |
|
ex 8522 90 98 |
44 |
|
ex 8529 90 81 |
31 |
|
ex 8540 91 00 |
32 |
|
ex 8543 89 95 |
52 |
|
ex 8548 90 90 |
39 |
|
ex 8548 90 90 |
46 |