4.12.2007   

EN

Official Journal of the European Union

C 290/15


Commission communication in the framework of the implementation of the Council Directive 89/106/EEC on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products

(Text with EEA relevance)

(Publication of titles and references of harmonised standards under the directive)

(2007/C 290/12)

The date of applicability of the standard as a harmonised European standard and of the end of the co-existence period, i.e. of withdrawal of conflicting national technical specifications, after which presumption of conformity must be based upon the harmonised European standard, are available at page: http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=cpd.hs of the European Commission NANDO information system.

ESO (1)

Reference and title of the harmonised standard

(and reference document)

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

(Note 1)

CEN

EN 1:1998

Flued oil stoves with vaporizing burners

 

EN 1:1998/A1:2007

 

 

CEN

EN 40-4:2005

Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns

 

EN 40-4:2005/AC:2006

 

 

CEN

EN 40-5:2002

Lighting columns — Part 5: Requirements for steel lighting columns

 

CEN

EN 40-6:2002

Lighting columns — Part 6: Requirements for aluminium lighting columns

 

CEN

EN 40-7:2002

Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns

 

CEN

EN 54-2:1997

Fire detection and fire alarm systems — Part 2: Control and indicating equipment

 

EN 54-2:1997/A1:2006

Note 3

31.12.2007

EN 54-2:1997/AC:1999

 

 

CEN

EN 54-3:2001

Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders

 

EN 54-3:2001/A1:2002

 

 

EN 54-3:2001/A2:2006

Note 3

31.5.2009

CEN

EN 54-4:1997

Fire detection and fire alarm systems — Part 4: Power supply equipment

 

EN 54-4:1997/A1:2002

 

 

EN 54-4:1997/A2:2006

Note 3

31.8.2009

EN 54-4:1997/AC:1999

 

 

CEN

EN 54-5:2000

Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors

 

EN 54-5:2000/A1:2002

 

 

CEN

EN 54-7:2000

Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization

 

EN 54-7:2000/A1:2002

 

 

EN 54-7:2000/A2:2006

Note 3

31.7.2009

CEN

EN 54-10:2002

Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors

 

EN 54-10:2002/A1:2005

Note 3

Date Expired

(31.8.2007)

CEN

EN 54-11:2001

Fire detection and fire alarm systems — Part 11: Manual call points

 

EN 54-11:2001/A1:2005

Note 3

30.9.2008

CEN

EN 54-12:2002

Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam

 

CEN

EN 54-17:2005

Fire detection and fire alarm systems — Part 17: Short-circuit isolators

 

CEN

EN 54-18:2005

Fire detection and fire alarm systems — Part 18: Input/output devices

 

EN 54-18:2005/AC:2007

 

 

CEN

EN 54-20:2006

Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors

 

CEN

EN 54-21:2006

Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment

 

CEN

EN 179:1997

Building hardware — Emergency exit devices operated by a lever handle or push pad — Requirements and test methods

 

EN 179:1997/A1:2001

 

 

EN 179:1997/A1:2001/AC:2002

 

 

CEN

EN 197-1:2000

Cement — Part 1: Composition, specifications and conformity criteria for common cements

 

EN 197-1:2000/A1:2004

Note 3

Date Expired

(21.10.2004)

EN 197-1:2000/A3:2007

Note 3

31.1.2008

CEN

EN 197-4:2004

Cement — Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements

 

CEN

EN 295-10:2005

Vitrified clay pipes and fittings and pipe joints for drains and sewers — Part 10: Performance requirements

 

CEN

EN 413-1:2004

Masonry cement — Part 1: Composition, specifications and conformity criteria

 

CEN

EN 438-7:2005

High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

 

CEN

EN 442-1:1995

Radiators and convectors — Part 1: Technical specifications and requirements

 

EN 442-1:1995/A1:2003

 

 

CEN

EN 450-1:2005

Fly ash for concrete — Part 1: Definition, specifications and conformity criteria

 

CEN

EN 459-1:2001

Building lime — Part 1: Definitions, specifications and conformity criteria

 

CEN

EN 490:2004

Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications

 

CEN

EN 492:2004

Fibre-cement slates and fittings — Product specification and test methods

 

EN 492:2004/A1:2005

Note 3

Date Expired

(28.2.2006)

EN 492:2004/A2:2006

Note 3

30.6.2008

CEN

EN 494:2004 + A3:2007

Fibre-cement profiled sheets and fittings — Product specification and test methods

EN 494:2004

Date Expired

(30.9.2007)

CEN

EN 516:2006

Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps

 

CEN

EN 517:2006

Prefabricated accessories for roofing — Roof safety hooks

 

CEN

EN 520:2004

Gypsum plasterboards — Definitions, requirements and test methods

 

CEN

EN 523:2003

Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control

 

CEN

EN 534:2006

Corrugated bitumen sheets — Product specification and test methods

 

CEN

EN 544:2005

Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods

 

CEN

EN 572-9:2004

Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard

 

CEN

EN 588-2:2001

Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers

 

CEN

EN 671-1:2001

Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose

 

EN 671-1:2001/AC:2002

 

 

CEN

EN 671-2:2001

Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose

 

EN 671-2:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

CEN

EN 681-1:1996

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber

 

EN 681-1:1996/A1:1998

 

 

EN 681-1:1996/A2:2002

 

 

EN 681-1:1996/A3:2005

Note 3

Date Expired

(28.2.2006)

CEN

EN 681-2:2000

Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers

 

EN 681-2:2000/A1:2002

 

 

CEN

EN 681-3:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber

 

EN 681-3:2000/A1:2002

 

 

CEN

EN 681-4:2000

Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements

 

EN 681-4:2000/A1:2002

 

 

CEN

EN 682:2002

Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

 

CEN

EN 771-1:2003

Specification for masonry units — Part 1: Clay masonry units

 

EN 771-1:2003/A1:2005

Note 3

Date Expired

(1.4.2006)

CEN

EN 771-2:2003

Specification for masonry units — Part 2: Calcium silicate masonry units

EN 771-2:2000

Date Expired

(31.1.2005)

EN 771-2:2003/A1:2005

Note 3

Date Expired

(1.4.2006)

CEN

EN 771-3:2003

Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)

 

EN 771-3:2003/A1:2005

Note 3

Date Expired

(1.4.2006)

CEN

EN 771-4:2003

Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units

 

EN 771-4:2003/A1:2005

Note 3

Date Expired

(1.4.2006)

CEN

EN 771-5:2003

Specification for masonry units — Part 5: Manufactured stone masonry units

 

EN 771-5:2003/A1:2005

Note 3

Date Expired

(1.4.2006)

CEN

EN 771-6:2005

Specification for masonry units — Part 6: Natural stone masonry units

 

CEN

EN 845-1:2003

Specification for ancillary components for masonry — Part 1: Ties, tension straps, hangers and brackets

 

CEN

EN 845-2:2003

Specification for ancillary components for masonry — Part 2: Lintels

 

CEN

EN 845-3:2003

Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork

 

CEN

EN 858-1:2002

Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control

 

EN 858-1:2002/A1:2004

 

 

CEN

EN 877:1999

Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance

 

EN 877:1999/A1:2006

Note 3

31.7.2008

CEN

EN 934-2:2001

Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling

 

EN 934-2:2001/A1:2004

 

 

EN 934-2:2001/A2:2005

Note 3

Date Expired

(30.6.2006)

CEN

EN 934-3:2003

Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity, marking and labelling

 

EN 934-3:2003/AC:2005

 

 

CEN

EN 934-4:2001

Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling

 

CEN

EN 997:2003

WC pans and WC suites with integral trap

 

EN 997:2003/A1:2006

Note 3

30.9.2008

CEN

EN 998-1:2003

Specification for mortar for masonry — Part 1: Rendering and plastering mortar

 

EN 998-1:2003/AC:2005

 

 

CEN

EN 998-2:2003

Specification for mortar for masonry — Part 2: Masonry mortar

 

CEN

EN 1057:2006

Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications

 

CEN

EN 1096-4:2004

Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard

 

CEN

EN 1123-1:1999

Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

EN 1123-1:1999/A1:2004

 

 

CEN

EN 1124-1:1999

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control

 

EN 1124-1:1999/A1:2004

 

 

CEN

EN 1125:1997

Building hardware — Panic exit devices operated by a horizontal bar — Requirements and test methods

 

EN 1125:1997/A1:2001

 

 

EN 1125:1997/A1:2001/AC:2002

 

 

CEN

EN 1154:1996

Building hardware — Controlled door closing devices — Requirements and test methods

 

EN 1154:1996/A1:2002

 

 

CEN

EN 1155:1997

Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods

 

EN 1155:1997/A1:2002

 

 

CEN

EN 1158:1997

Building hardware — Door coordinator devices — Requirements and test methods

 

EN 1158:1997/A1:2002

 

 

EN 1158:1997/A1:2002/AC:2006

 

 

CEN

EN 1168:2005

Precast concrete products — Hollow core slabs

 

CEN

EN 1279-5:2005

Glass in building — Insulating glass units — Part 5: Evaluation of conformity

 

CEN

EN 1304:2005

Clay roofing tiles and fittings — Product definitions and specifications

 

CEN

EN 1317-5:2007

Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems

 

CEN

EN 1337-3:2005

Structural bearings — Part 3: Elastomeric bearings

 

CEN

EN 1337-4:2004

Structural bearings — Part 4: Roller bearings

 

EN 1337-4:2004/AC:2007

 

 

CEN

EN 1337-5:2005

Structural bearings — Part 5: Pot bearings

 

CEN

EN 1337-6:2004

Structural bearings — Part 6: Rocker bearings

 

CEN

EN 1337-7:2004

Structural bearings — Part 7: Spherical and cylindrical PTFE bearings

EN 1337-7:2000

Date Expired

(30.9.2004)

CEN

EN 1338:2003

Concrete paving blocks — Requirements and test methods

 

EN 1338:2003/AC:2006

 

 

CEN

EN 1339:2003

Concrete paving flags — Requirements and test methods

 

EN 1339:2003/AC:2006

 

 

CEN

EN 1340:2003

Concrete kerb units — Requirements and test methods

 

EN 1340:2003/AC:2006

 

 

CEN

EN 1341:2001

Slabs of natural stone for external paving — Requirements and test methods

 

CEN

EN 1342:2001

Setts of natural stone for external paving — Requirements and test methods

 

CEN

EN 1343:2001

Kerbs of natural stone for external paving — Requirements and test methods

 

CEN

EN 1344:2002

Clay pavers — Requirements and test methods

 

CEN

EN 1423:1997

Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two

 

EN 1423:1997/A1:2003

 

 

CEN

EN 1433:2002

Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity

 

EN 1433:2002/A1:2005

Note 3

Date Expired

(31.12.2005)

CEN

EN 1457:1999

Chimneys — Clay/Ceramic Flue Liners — Requirements and test methods

 

EN 1457:1999/A1:2002

 

 

EN 1457:1999/AC:2006

 

 

EN 1457:1999/A1:2002/AC:2007

 

 

CEN

EN 1463-1:1997

Road marking materials — Retroflecting road studs — Part 1: Initial performance requirements

 

EN 1463-1:1997/A1:2003

 

 

CEN

EN 1469:2004

Natural stone products — Slabs for cladding — Requirements

 

CEN

EN 1504-2:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete

 

CEN

EN 1504-3:2005

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair

 

CEN

EN 1504-4:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding

 

CEN

EN 1504-5:2004

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection

 

CEN

EN 1504-6:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar

 

CEN

EN 1504-7:2006

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection

 

CEN

EN 1520:2002

Prefabricated reinforced components of lightweight aggregate concrete with open structure

 

CEN

EN 1748-1-2:2004

Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard

 

CEN

EN 1748-2-2:2004

Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard

 

CEN

EN 1806:2006

Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods

 

CEN

EN 1825-1:2004

Grease separators — Part 1: Principles of design, performance and testing, marking and quality control

 

EN 1825-1:2004/AC:2006

 

 

CEN

EN 1856-1:2003

Chimneys — Requirements for metal chimneys — Part 1: System chimney products

 

EN 1856-1:2003/A1:2006

Note 3

Date Expired

(30.11.2006)

CEN

EN 1856-2:2004

Chimneys — Requirements for metal chimneys — Part 2: Metal liners and connecting flue pipes

 

CEN

EN 1857:2003

Chimneys — Components — Concrete flue liners

 

EN 1857:2003/AC:2005

 

 

EN 1857:2003/AC:2007

 

 

CEN

EN 1858:2003

Chimneys — Components — Concrete flue blocks

 

CEN

EN 1863-2:2004

Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 1873:2005

Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods

 

CEN

EN 1916:2002

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

 

EN 1916:2002/AC:2006

 

 

CEN

EN 1917:2002

Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

 

EN 1917:2002/AC:2006

 

 

CEN

EN 1935:2002

Building hardware — Single-axis hinges — Requirements and test methods

 

EN 1935:2002/AC:2003

 

 

CEN

EN 10025-1:2004

Hot rolled products of structural steels — Part 1: General technical delivery conditions

 

CEN

EN 10210-1:2006

Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

CEN

EN 10219-1:2006

Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions

 

CEN

EN 10224:2002

Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

EN 10224:2002/A1:2005

Note 3

Date Expired

(31.12.2005)

CEN

EN 10311:2005

Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids

 

CEN

EN 10312:2002

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions

 

EN 10312:2002/A1:2005

Note 3

Date Expired

(31.12.2005)

CEN

EN 12004:2007

Adhesives for tiles — Requirements, evaluation of conformity, classification and designation

EN 12004:2001

31.5.2009

CEN

EN 12050-1:2001

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter

 

CEN

EN 12050-2:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater

 

CEN

EN 12050-3:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications

 

CEN

EN 12050-4:2000

Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter

 

CEN

EN 12057:2004

Natural stone products — Modular tiles — Requirements

 

CEN

EN 12058:2004

Natural stone products — Slabs for floors and stairs — Requirements

 

CEN

EN 12094-1:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices

 

CEN

EN 12094-2:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices

 

CEN

EN 12094-3:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices

 

CEN

EN 12094-4:2004

Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators

 

CEN

EN 12094-5:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators

EN 12094-5:2000

30.4.2009

CEN

EN 12094-6:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices

EN 12094-6:2000

30.4.2009

CEN

EN 12094-7:2000

Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems

 

EN 12094-7:2000/A1:2005

 

 

CEN

EN 12094-8:2006

Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors

 

CEN

EN 12094-9:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors

 

CEN

EN 12094-10:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches

 

CEN

EN 12094-11:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices

 

CEN

EN 12094-12:2003

Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices

 

CEN

EN 12094-13:2001

Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves

 

CEN

EN 12101-1:2005

Smoke and heat control systems — Part 1: Specification for smoke barriers

 

EN 12101-1:2005/A1:2006

Note 3

31.12.2007

CEN

EN 12101-2:2003

Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators

 

CEN

EN 12101-3:2002

Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators

 

EN 12101-3:2002/AC:2005

 

 

CEN

EN 12101-6:2005

Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits

 

EN 12101-6:2005/AC:2006

 

 

CEN

EN 12101-10:2005

Smoke and heat control systems — Part 10: Power supplies

 

EN 12101-10:2005/AC:2007

 

 

CEN

EN 12150-2:2004

Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 12209:2003

Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods

 

EN 12209:2003/AC:2005

 

 

CEN

EN 12259-1:1999 + A1:2001

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers

 

EN 12259-1:1999 + A1:2001/A2:2004

Note 3

Date Expired

(28.2.2006)

EN 12259-1:1999 + A1:2001/A3:2006

Note 3

Date Expired

(31.8.2006)

CEN

EN 12259-2:1999

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies

 

EN 12259-2:1999/A1:2001

 

 

EN 12259-2:1999/A2:2005

Note 3

Date Expired

(31.8.2007)

EN 12259-2:1999/AC:2002

 

 

CEN

EN 12259-3:2000

Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies

 

EN 12259-3:2000/A1:2001

 

 

EN 12259-3:2000/A2:2005

Note 3

Date Expired

(31.8.2007)

CEN

EN 12259-4:2000

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms

 

EN 12259-4:2000/A1:2001

 

 

CEN

EN 12259-5:2002

Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors

 

CEN

EN 12271:2006

Surface dressing — Requirements

 

CEN

EN 12285-2:2005

Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids

 

CEN

EN 12326-1:2004

Slate and stone products for discontinuous roofing and cladding — Part 1: Product specification

 

CEN

EN 12337-2:2004

Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 12352:2006

Traffic control equipment — Warning and safety light devices

 

CEN

EN 12368:2006

Traffic control equipment — Signal heads

 

CEN

EN 12380:2002

Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity

 

CEN

EN 12446:2003

Chimneys — Components — Concrete outer wall elements

 

CEN

EN 12467:2004

Fibre-cement flat sheets — Product specification and test methods

 

EN 12467:2004/A1:2005

Note 3

Date Expired

(28.2.2006)

EN 12467:2004/A2:2006

Note 3

30.6.2008

CEN

EN 12566-1:2000

Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks

 

EN 12566-1:2000/A1:2003

 

 

CEN

EN 12566-3:2005

Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants

 

CEN

EN 12620:2002

Aggregates for concrete

 

CEN

EN 12676-1:2000

Anti-glare systems for roads — Part 1: Performance and characteristics

 

EN 12676-1:2000/A1:2003

 

 

CEN

EN 12764:2004

Sanitary appliances — Specification for whirlpool baths

 

CEN

EN 12794:2005 + A1:2007

Precast concrete products — Foundation piles

EN 12794:2005

30.11.2007

CEN

EN 12809:2001

Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods

 

EN 12809:2001/A1:2004

 

 

EN 12809:2001/A1:2004/AC:2006

 

 

EN 12809:2001/AC:2006

 

 

EN 12809:2001/A1:2004/AC:2007

 

 

CEN

EN 12815:2001

Residential cookers fired by solid fuel — Requirements and test methods

 

EN 12815:2001/A1:2004

 

 

EN 12815:2001/A1:2004/AC:2006

 

 

EN 12815:2001/AC:2006

 

 

EN 12815:2001/A1:2004/AC:2007

 

 

CEN

EN 12839:2001

Precast concrete products — Elements for fences

 

CEN

EN 12843:2004

Precast concrete products — Masts and poles

 

CEN

EN 12859:2001

Gypsum blocks — Definitions, requirements and test methods

 

EN 12859:2001/A1:2004

Note 3

Date Expired

(31.12.2004)

CEN

EN 12860:2001

Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods

 

CEN

EN 12878:2005

Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test

 

EN 12878:2005/AC:2006

 

 

CEN

EN 12951:2004

Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods

 

CEN

EN 12966-1:2005

Road vertical signs — Variable message traffic signs — Part 1: Product standard

 

CEN

EN 13024-2:2004

Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 13043:2002

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

 

EN 13043:2002/AC:2004

 

 

CEN

EN 13055-1:2002

Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout

 

CEN

EN 13055-2:2004

Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications

 

CEN

EN 13063-1:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance

EN 13063-1:2005

30.4.2009

CEN

EN 13063-2:2005+A1:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions

EN 13063-2:2005

30.4.2009

CEN

EN 13063-3:2007

Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys

 

CEN

EN 13069:2005

Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods

 

CEN

EN 13084-5:2005

Free-standing chimneys — Part 5: Material for brick liners — Product specifications

 

EN 13084-5:2005/AC:2006

 

 

CEN

EN 13084-7:2005

Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

 

CEN

EN 13101:2002

Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity

 

CEN

EN 13108-1:2006

Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete

 

CEN

EN 13108-2:2006

Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers

 

CEN

EN 13108-3:2006

Bituminous mixtures — Material specifications — Part 3: Soft Asphalt

 

CEN

EN 13108-4:2006

Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt

 

CEN

EN 13108-5:2006

Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt

 

CEN

EN 13108-6:2006

Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt

 

CEN

EN 13108-7:2006

Bituminous mixtures — Material specifications — Part 7: Porous Asphalt

 

CEN

EN 13139:2002

Aggregates for mortar

 

CEN

EN 13160-1:2003

Leak detection systems — Part 1: General principles

 

CEN

EN 13162:2001

Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification

 

EN 13162:2001/AC:2005

 

 

CEN

EN 13163:2001

Thermal insulation products for buildings — Factory made products of expanded polystyrene (EPS) — Specification

 

EN 13163:2001/AC:2005

 

 

CEN

EN 13164:2001

Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification

 

EN 13164:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13164:2001/AC:2005

 

 

CEN

EN 13165:2001

Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification

 

EN 13165:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13165:2001/A2:2004

Note 3

Date Expired

(31.5.2005)

EN 13165:2001/AC:2005

 

 

CEN

EN 13166:2001

Thermal insulation products for buildings — Factory made products of phenolic foam (PF) — Specification

 

EN 13166:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13166:2001/AC:2005

 

 

CEN

EN 13167:2001

Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification

 

EN 13167:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13167:2001/AC:2005

 

 

CEN

EN 13168:2001

Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification

 

EN 13168:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13168:2001/AC:2005

 

 

CEN

EN 13169:2001

Thermal insulation products for buildings — Factory made products of expanded perlite (EPB) — Specification

 

EN 13169:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13169:2001/AC:2005

 

 

CEN

EN 13170:2001

Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification

 

EN 13170:2001/AC:2005

 

 

CEN

EN 13171:2001

Thermal insulating products for buildings — Factory made wood fibre (WF) products — Specification

 

EN 13171:2001/A1:2004

Note 3

Date Expired

(30.11.2004)

EN 13171:2001/AC:2005

 

 

CEN

EN 13224:2004+A1:2007

Precast concrete products — Ribbed floor elements

EN 13224:2004

31.12.2007

CEN

EN 13225:2004

Precast concrete products — Linear structural elements

 

EN 13225:2004/AC:2006

 

 

CEN

EN 13229:2001

Inset appliances including open fires fired by solid fuels — Requirements and test methods

 

EN 13229:2001/A1:2003

 

 

EN 13229:2001/A2:2004

 

 

EN 13229:2001/AC:2006

 

 

EN 13229:2001/A2:2004/AC:2006

 

 

EN 13229:2001/A2:2004/AC:2007

 

 

CEN

EN 13240:2001

Room heaters fired by solid fuel — Requirements and test methods

 

EN 13240:2001/A2:2004

 

 

EN 13240:2001/A2:2004/AC:2006

 

 

EN 13240:2001/AC:2006

 

 

EN 13240:2001/A2:2004/AC:2007

 

 

CEN

EN 13241-1:2003

Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics

 

CEN

EN 13242:2002

Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction

 

EN 13242:2002/AC:2004

 

 

CEN

EN 13249:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

 

EN 13249:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

CEN

EN 13250:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways

 

EN 13250:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

CEN

EN 13251:2000

Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures

 

EN 13251:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

CEN

EN 13252:2000

Geotextiles and geotextile-related products — Characteristics required for use in drainage systems

 

EN 13252:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

CEN

EN 13253:2000

Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments)

 

EN 13253:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

CEN

EN 13254:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams

 

EN 13254:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

EN 13254:2000/AC:2003

 

 

CEN

EN 13255:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals

 

EN 13255:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

EN 13255:2000/AC:2003

 

 

CEN

EN 13256:2000

Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures

 

EN 13256:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

EN 13256:2000/AC:2003

 

 

CEN

EN 13257:2000

Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals

 

EN 13257:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

EN 13257:2000/AC:2003

 

 

CEN

EN 13263-1:2005

Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria

 

CEN

EN 13265:2000

Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects

 

EN 13265:2000/A1:2005

Note 3

Date Expired

(31.7.2005)

EN 13265:2000/AC:2003

 

 

CEN

EN 13279-1:2005

Gypsum binders and gypsum plasters — Part 1: Definitions and requirements

 

CEN

EN 13310:2003

Kitchen sinks — Functional requirements and test methods

 

CEN

EN 13341:2005

Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks — Requirements and test methods

 

CEN

EN 13361:2004

Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams

 

EN 13361:2004/A1:2006

Note 3

Date Expired

(28.2.2007)

CEN

EN 13362:2005

Geosynthetic Barriers — Characteristics required for use in the construction of canals

 

CEN

EN 13383-1:2002

Armourstone — Part 1: Specification

 

CEN

EN 13407:2006

Wall-hung urinals — Functional requirements and test methods

 

CEN

EN 13450:2002

Aggregates for railway ballast

 

EN 13450:2002/AC:2004

 

 

CEN

EN 13454-1:2004

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements

 

CEN

EN 13479:2004

Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials

 

CEN

EN 13491:2004

Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

 

EN 13491:2004/A1:2006

Note 3

Date Expired

(28.2.2007)

CEN

EN 13492:2004

Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

 

EN 13492:2004/A1:2006

Note 3

Date Expired

(28.2.2007)

CEN

EN 13493:2005

Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites

 

CEN

EN 13502:2002

Chimneys — Requirements and test methods for clay/ceramic flue terminals

 

CEN

EN 13561:2004

External blinds — Performance requirements including safety

 

CEN

EN 13564-1:2002

Anti-flooding devices for buildings — Part 1: Requirements

 

CEN

EN 13565-1:2003

Fixed firefighting systems — Foam systems — Part 1: Requirements and test methods for components

 

CEN

EN 13616:2004

Overfill prevention devices for static tanks for liquid petroleum fuels

 

EN 13616:2004/AC:2006

 

 

CEN

EN 13658-1:2005

Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering

 

CEN

EN 13658-2:2005

Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

 

CEN

EN 13659:2004

Shutters — Performance requirements including safety

 

CEN

EN 13693:2004

Precast concrete products — Special roof elements

 

CEN

EN 13707:2004

Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics

 

EN 13707:2004/A1:2006

Note 3

Date Expired

(31.5.2007)

CEN

EN 13747:2005

Precast concrete products — Floor plates for floor systems

 

EN 13747:2005/AC:2006

 

 

CEN

EN 13748-1:2004

Terrazzo tiles — Part 1: Terrazzo tiles for internal use

 

EN 13748-1:2004/A1:2005

Note 3

Date Expired

(31.12.2005)

EN 13748-1:2004/AC:2005

 

 

CEN

EN 13748-2:2004

Terrazzo tiles — Part 2: Terrazzo tiles for external use

 

CEN

EN 13813:2002

Screed material and floor screeds — Screed material — Properties and requirements

 

CEN

EN 13815:2006

Fibrous gypsum plaster casts — Definitions, requirements and test methods

 

CEN

EN 13830:2003

Curtain walling — Product standard

 

CEN

EN 13859-1:2005

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing

 

CEN

EN 13859-2:2004

Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls

 

CEN

EN 13877-3:2004

Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements

 

CEN

EN 13915:2007

Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods

 

CEN

EN 13950:2005

Gypsum plasterboard thermal/acoustic insulation composite panels — Definitions, requirements and test methods

 

CEN

EN 13956:2005

Flexible sheet for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics

 

EN 13956:2005/AC:2006

 

 

CEN

EN 13963:2005

Jointing materials for gypsum plasterboards — Definitions, requirements and test methods

 

EN 13963:2005/AC:2006

 

 

CEN

EN 13964:2004

Suspended ceilings — Requirements and test methods

 

EN 13964:2004/A1:2006

Note 3

31.8.2008

CEN

EN 13967:2004

Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics

 

EN 13967:2004/A1:2006

Note 3

Date Expired

(31.5.2007)

CEN

EN 13969:2004

Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics

 

EN 13969:2004/A1:2006

Note 3

Date Expired

(31.5.2007)

CEN

EN 13970:2004

Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics

 

EN 13970:2004/A1:2006

Note 3

Date Expired

(31.5.2007)

CEN

EN 13978-1:2005

Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions

 

CEN

EN 13984:2004

Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics

 

EN 13984:2004/A1:2006

Note 3

Date Expired

(31.5.2007)

CEN

EN 13986:2004

Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking

EN 13986:2002

Date Expired

(30.4.2005)

CEN

EN 14016-1:2004

Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements

 

CEN

EN 14037-1:2003

Ceiling mounted radiant panels supplied with water at temperature below 120 °C — Part 1: Technical specifications and requirements

 

CEN

EN 14041:2004

Resilient, textile and laminate floor coverings — Essential characteristics

 

EN 14041:2004/AC:2006

 

 

CEN

EN 14063-1:2004

Thermal insulation products for buildings — In situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation

 

EN 14063-1:2004/AC:2006

 

 

CEN

EN 14080:2005

Timber structures — Glued laminated timber — Requirements

 

CEN

EN 14081-1:2005

Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements

 

CEN

EN 14178-2:2004

Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 14179-2:2005

Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 14188-1:2004

Joint fillers and sealants — Part 1: Specifications for hot applied sealants

 

CEN

EN 14188-2:2004

Joint fillers and sealants — Part 2: Specifications for cold applied sealants

 

CEN

EN 14188-3:2006

Joint fillers and sealants — Part 3: Specifications for preformed joint seals

 

CEN

EN 14190:2005

Gypsum plasterboard products from reprocessing — Definitions, requirements and test methods

 

CEN

EN 14195:2005

Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods

 

EN 14195:2005/AC:2006

 

 

CEN

EN 14209:2005

Preformed plasterboard cornices — Definitions, requirements and test methods

 

CEN

EN 14216:2004

Cement — Composition, specifications and conformity criteria for very low heat special cements

 

CEN

EN 14246:2006

Gypsum elements for suspended ceilings — Definitions, requirements and test methods

 

EN 14246:2006/AC:2007

 

 

CEN

EN 14250:2004

Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners

 

CEN

EN 14296:2005

Sanitary appliances — Communal washing troughs

 

CEN

EN 14316-1:2004

Thermal insulation products for buildings — In situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation

 

CEN

EN 14317-1:2004

Thermal insulation products for buildings — In situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation

 

CEN

EN 14321-2:2005

Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard

 

CEN

EN 14339:2005

Underground fire hydrants

 

CEN

EN 14342:2005

Wood flooring — Characteristics, evaluation of conformity and marking

 

EN 14342:2005/AC:2007

 

 

CEN

EN 14351-1:2006

Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

 

CEN

EN 14374:2004

Timber structures — Structural laminated veneer lumber — Requirements

 

CEN

EN 14384:2005

Pillar fire hydrants

 

CEN

EN 14388:2005

Road traffic noise reducing devices — Specifications

 

CEN

EN 14396:2004

Fixed ladders for manholes

 

CEN

EN 14399-1:2005

High-strength structural bolting assemblies for preloading — Part 1: General requirements

 

CEN

EN 14411:2006

Ceramic tiles — Definitions, classification, characteristics and marking

EN 14411:2003

Date Expired

(30.6.2007)

CEN

EN 14428:2004

Shower enclosures — Functional requirements and test methods

 

CEN

EN 14449:2005

Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard

 

EN 14449:2005/AC:2005

 

 

CEN

EN 14471:2005

Chimneys — System chimneys with plastic flue liners — Requirements and test methods

 

CEN

EN 14496:2005

Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods

 

CEN

EN 14528:2007

Bidets — Functional requirements and test methods

EN 14528:2005

31.1.2009

CEN

EN 14604:2005

Smoke alarm devices

 

CEN

EN 14647:2005

Calcium aluminate cement — Composition, specifications and conformity criteria

 

EN 14647:2005/AC:2006

 

 

CEN

EN 14680:2006

Adhesives for non-pressure thermoplastic piping systems — Specifications

 

CEN

EN 14688:2006

Sanitary appliances — Wash basins — Functional requirements and test methods

 

CEN

EN 14716:2004

Stretched ceilings — Requirements and test methods

 

CEN

EN 14782:2006

Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements

 

CEN

EN 14783:2006

Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements

 

CEN

EN 14800:2007

Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels

 

CEN

EN 14814:2007

Adhesives for thermoplastic piping systems for fluids under pressure — Specifications

 

CEN

EN 14843:2007

Precast concrete products — Stairs

 

CEN

EN 14844:2006

Precast concrete products — Box culverts

 

CEN

EN 14889-1:2006

Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity

 

CEN

EN 14889-2:2006

Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity

 

CEN

EN 14904:2006

Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification

 

CEN

EN 14909:2006

Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics

 

CEN

EN 14915:2006

Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking

 

EN 14915:2006/AC:2007

 

 

CEN

EN 14933:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification

 

CEN

EN 14934:2007

Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification

 

CEN

EN 14964:2006

Rigid underlays for discontinuous roofing — Definitions and characteristics

 

CEN

EN 14967:2006

Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics

 

CEN

EN 14989-1:2007

Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances

 

CEN

EN 14991:2007

Precast concrete products — Foundation elements

 

CEN

EN 14992:2007

Precast concrete products — Wall elements

 

CEN

EN 15048-1:2007

Non-preloaded structural bolting assemblies — Part 1: General requirements

 

CEN

EN 15050:2007

Precast concrete products — Bridge elements

 

CEN

EN 15088:2005

Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery

 

CEN

EN 15167-1:2006

Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria

 

CEN

EN 15250:2007

Slow heat release appliances fired by solid fuel — Requirements and test methods

 

Note 1

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 3

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note:

Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and of the Council (2) amended by the Directive 98/48/EC (3).

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages.

This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list.

More information about harmonised standards on the Internet at:

http://ec.europa.eu/enterprise/newapproach/standardization/harmstds/


(1)  ESO: European Standardisation Organisation:

CEN: rue de Stassart 36, B-1050 Brussels, Tel. (32-2) 550 08 11; fax (32-2) 550 08 19 (http://www.cen.eu)

CENELEC: rue de Stassart 35, B-1050 Brussels, Tel. (32-2) 519 68 71; fax (32-2) 519 69 19 (http://www.cenelec.org)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. (33) 492 94 42 00 ; fax (33) 493 65 47 16 (http://www.etsi.org).

(2)  OJ L 204, 21.7.1998, p. 37.

(3)  OJ L 217, 5.8.1998, p. 18.